[RECOVERY][manta] TWRP 3.1.1-0 touch recovery [2017-05-19]

Search This thread

Dees_Troy

Senior Recognized Developer
Mar 31, 2008
1,705
13,582
KC MO
www.teamw.in
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.




CHANGELOG for 3.0.2-0:

-Backups will now include adopted storage keys (Dees_Troy)
-Fixed an adb restore issue (bigbiff)
-Fixed rebooting when no OS is present (Dees_Troy)
-Fixed line wrapping in the GUI terminal (_that)
-Updated TWRP source code to AOSP 7.1.2 (Dees_Troy)


CHANGELOG for 3.1.0-0:

-vold decrypt on a few select HTC devices, TWRP will now attempt to use the system partition's vold and vdc binaries and libraries to decrypt the data partition (nkk71 and CaptainThrowback)
-adb backup to stream a backup directly to or from your PC, see documentation here: https://github.com/omnirom/android_bootable_recovery/commit/ce8f83c48d200106ff61ad530c863b15c16949d9 (bigbiff)
-tweak MTP startup routines (mdmower)
-support new Android 7.x xattrs for backup and restore to fix loss of data after a restore (Dees_Troy)
-support POSIX file capabilities backup and restore to fix VoLTE on HTC devices and possibly other issues (Dees_Troy)
-better indicate to users that internal storage is not backed up (Dees_Troy)
-improve automatic determination of TW_THEME (mdmower)
-minimal getcap and setcap support (_that)
-try mounting both ext4 and f2fs during decrypt (jcadduono and Dees_Troy)
-shut off backlight with power key (mdmower)
-timeout during FDE decrypt (Dees_Troy and nkk71)
-support for FBE decrypt and backing up and restoring FBE policies (Dees_Troy)
-boot slot support (Dees_Troy)
-TWRP app install prompt during reboot (Dees_Troy)
-support for AB OTA zips (Dees_Troy)
-support new Android 7.x log command (Dees_Troy)
-update recovery sources to AOSP 7.1 (Dees_Troy)
-numerous bugfixes and improvements by too many people to mention

CHANGELOG for 3.0.2-0:

-Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
-Add Greek translation to some builds.

CHANGELOG for 3.0.1-0:

-support new CM 13.0 pattern encryption (sultanqasim)
-fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
-libtar updated to latest upstream and fixes (jcadduono)
-fixes for loading custom themes (_that)
-TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
-translation updates - added Italian, Czech and Polish and significant updates to Dutch
-progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
-fix input box text display (Dees_Troy)
-reboot option after zip install complete (bigbiff)
-other mostly invisible bug fixes and improvements

CHANGELOG for 3.0.0-0:

-Completely new theme - Much more modern and much nicer looking (by z31s1g)
-True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
-Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
-Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
-Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
-Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
-SuperSU prompt will no longer display if a Marshmallow ROM is installed
-Update exfat, exfat fuse, dosfstools (by mdmower)
-Update AOSP base to 6.0
-A huge laundry list of other minor fixes and tweaks

WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.

Notes for themers: In addition to the udpated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.

Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.

We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!

DOWNLOAD:
1) Install the TWRP app from the Play Store or grab the apk from our website
2) Open the app, agree to the terms, and enable root access
3) Select TWRP Flash
4) Search for your device and select the version you wish to download
5) Once the download is complete, select the file (it's usually in your downloads folder) and then Flash Recovery
OR:
Most devices can be updated quickly and easily within TWRP if you already have version 2.8.4.0 or higher installed
1) Download the latest version from our website on your device
2) Reboot to TWRP
3) Hit Install and tap the "Images..." button in the lower right
4) Browse to the location of the TWRP image on your device and select it
5) Select recovery from the partition list and swipe to flash
OR:
You can find more information and download links on our website.

BUGS:
If you have found a bug, please consider posting it to our github issues log. It's pretty much impossible for us to keep up with the more than 40 threads that we have for the devices that we "directly" support. If you have a significant problem that cannot be answered in this thread, your best bet is to PM me directly, contact us via our website, or find us in our IRC channel below. If you see someone that's struggling, feel free to point it out to us. We need your help to help us keep track of all of our devices! Thanks!

SUPPORT:
Live support is available via #twrp on Freenode with your IRC client or just click this link.
 
Last edited:

draco259

Senior Member
Nov 1, 2010
333
50
Awesome thanks :) just wondering, does this have the random reboot issue like cwm?

Sent from my Galaxy Nexus using Tapatalk 2
 

Randomwalker

Senior Member
Dec 5, 2011
334
56
You can't. You will have to install it through fastboot.

Sent from my GT-N7100 using xda app-developers app
 

Dees_Troy

Senior Recognized Developer
Mar 31, 2008
1,705
13,582
KC MO
www.teamw.in
Awesome thanks :) just wondering, does this have the random reboot issue like cwm?

Sent from my Galaxy Nexus using Tapatalk 2

I was able to figure out what was needed to prevent the reboot. I pushed my device configuration files to the team win github if you really want to take a look or compile your own. Good news is that I can compile from source without having to repack manually.
 

Icetech3

Senior Member
Sep 24, 2011
401
51
Detroit
You can't. You will have to install it through fastboot.

Sent from my GT-N7100 using xda app-developers app

ah... ok.. i must have gotten confused when one of the admins said to root it after installing twrp using goomanager..

EDIT: So these direction from post #1 are totally wrong? if randomwalker is correct?

DOWNLOAD:
The fastest and easiest way to install TWRP is to use the GooManager app:
Play Store Link
Direct Download
1) Install GooManager from the Play Store
2) Open GooManager and provide root permissions
3) Hit Menu (or the button with the 3 dots on your screen) and then Install OpenRecovery
OR:
 
Last edited:

draco259

Senior Member
Nov 1, 2010
333
50
That's if you are already rooted, go with the or option.

Sent from my Galaxy Nexus using Tapatalk 2
 

Mike02z

Senior Member
Feb 3, 2012
1,953
795
Greenville, SC
OnePlus 9 Pro
I installed and got into TWRP fine the first time.Now I'm stuck in a boot loop. It has been sitting for 30 minutes with just the X flashing.

I can get into the bootloader and TWRP fine but the system will not boot just sits with the flashing X..
 
Last edited:

Dees_Troy

Senior Recognized Developer
Mar 31, 2008
1,705
13,582
KC MO
www.teamw.in
I installed and got into TWRP fine the first time.Now I'm stuck in a boot loop. It has been sitting for 30 minutes with just the X flashing.

I can get into the bootloader and TWRP fine but the system will not boot just sits with the flashing X..

Did you just unlock it? If so, reboot into TWRP and go to the wipe section. Format Data & Wipe Cache & you will be good to go.
 

momulah

Senior Member
May 4, 2009
1,105
105
Op-Town
Same as user above with bootloops. I tried wiping cache/delvik and also factory reset but it says failed everytime in red at the top of TWRP. Im lost. Does the same with stock CWM Touch also. I downloaded the pre rooted factory rom but cannot access sd through mounting to flash that rom either. An ideas as far as sending the file to sd using adb commands?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 82
    Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.




    CHANGELOG for 3.0.2-0:

    -Backups will now include adopted storage keys (Dees_Troy)
    -Fixed an adb restore issue (bigbiff)
    -Fixed rebooting when no OS is present (Dees_Troy)
    -Fixed line wrapping in the GUI terminal (_that)
    -Updated TWRP source code to AOSP 7.1.2 (Dees_Troy)


    CHANGELOG for 3.1.0-0:

    -vold decrypt on a few select HTC devices, TWRP will now attempt to use the system partition's vold and vdc binaries and libraries to decrypt the data partition (nkk71 and CaptainThrowback)
    -adb backup to stream a backup directly to or from your PC, see documentation here: https://github.com/omnirom/android_bootable_recovery/commit/ce8f83c48d200106ff61ad530c863b15c16949d9 (bigbiff)
    -tweak MTP startup routines (mdmower)
    -support new Android 7.x xattrs for backup and restore to fix loss of data after a restore (Dees_Troy)
    -support POSIX file capabilities backup and restore to fix VoLTE on HTC devices and possibly other issues (Dees_Troy)
    -better indicate to users that internal storage is not backed up (Dees_Troy)
    -improve automatic determination of TW_THEME (mdmower)
    -minimal getcap and setcap support (_that)
    -try mounting both ext4 and f2fs during decrypt (jcadduono and Dees_Troy)
    -shut off backlight with power key (mdmower)
    -timeout during FDE decrypt (Dees_Troy and nkk71)
    -support for FBE decrypt and backing up and restoring FBE policies (Dees_Troy)
    -boot slot support (Dees_Troy)
    -TWRP app install prompt during reboot (Dees_Troy)
    -support for AB OTA zips (Dees_Troy)
    -support new Android 7.x log command (Dees_Troy)
    -update recovery sources to AOSP 7.1 (Dees_Troy)
    -numerous bugfixes and improvements by too many people to mention

    CHANGELOG for 3.0.2-0:

    -Fix a bug with the input box that affected masked inputs (passwords). This fixes decrypt of full device encryption on devices that support decrypt. This bug also impacts encrypted backups. Users are highly encouraged to stop using 3.0.1 if you use encrypted backups or if you need decrypt of data in TWRP.
    -Add Greek translation to some builds.

    CHANGELOG for 3.0.1-0:

    -support new CM 13.0 pattern encryption (sultanqasim)
    -fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
    -libtar updated to latest upstream and fixes (jcadduono)
    -fixes for loading custom themes (_that)
    -TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
    -translation updates - added Italian, Czech and Polish and significant updates to Dutch
    -progress bar improvements - progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
    -fix input box text display (Dees_Troy)
    -reboot option after zip install complete (bigbiff)
    -other mostly invisible bug fixes and improvements

    CHANGELOG for 3.0.0-0:

    -Completely new theme - Much more modern and much nicer looking (by z31s1g)
    -True Terminal Emulator - Includes arrow keys, tab and tab completion, etc. (by _that)
    -Language translation - It won’t be perfect and especially some languages that require large font files like Chinese & Japanese won’t be availble on most devices. Also some languages may only be partially translated at this time. Feel free to submit more translations to OmniROM’s Gerrit. (mostly by Dees_Troy)
    -Flashing of sparse images - On select devices you will be able to flash some parts of factory images via the TWRP GUI (by HashBang173)
    -Adopted storage support for select devices - TWRP can now decrypt adopted storage partitions from Marshmallow
    -Reworked graphics to bring us more up to date with AOSP - includes support for adf and drm graphics (by Dees_Troy)
    -SuperSU prompt will no longer display if a Marshmallow ROM is installed
    -Update exfat, exfat fuse, dosfstools (by mdmower)
    -Update AOSP base to 6.0
    -A huge laundry list of other minor fixes and tweaks

    WARNING: This is our first release in a long time. We have a lot of new and somewhat aggressive changes in this new release. The changes to the graphics back-end may cause some devices to not boot up properly or have other display-related issues. If you are not in a position to reflash an older build of TWRP, then wait until you are or at least wait until others have tried the new version for your specific device. You don’t want to end up with a non-working recovery and have to wait several hours or days to get to a computer to be able to fix it.

    Notes for themers: In addition to the udpated theme, we have introduced a theme version variable to the TWRP theme system. If the theme version does not match the version that TWRP expects, TWRP will reject the custom theme and load its stock theme. This change will ensure that people who update TWRP without updating their theme will still have a workable recovery. We have removed libjpeg support. The stock theme was only using a jpeg image for the splash / curtain. This change means that any custom themes will no longer be able to use jpeg images. It also means that tools used to repack recovery images with a different curtain / splash will need to be updated to use the new method.

    Version number notes: For a while we’ve been using a 4 digit version number and reserved the 4th digit for device-specific updates. For instance, we find and fix a device-specific issue like decryption of data on Nexus 5, we would release that as a 2.8.7.1. After a while, some people would start asking where 2.8.7.1 was for other devices. So, going forward we have decided to change the numbering scheme to 3.0.0-2, etc. Our hope is that this version numbering scheme will more clearly identify that the 4th digit does not indicate a version change for the code base.

    We need your help! The bulk of TWRP work is done by 3 people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!

    DOWNLOAD:
    1) Install the TWRP app from the Play Store or grab the apk from our website
    2) Open the app, agree to the terms, and enable root access
    3) Select TWRP Flash
    4) Search for your device and select the version you wish to download
    5) Once the download is complete, select the file (it's usually in your downloads folder) and then Flash Recovery
    OR:
    Most devices can be updated quickly and easily within TWRP if you already have version 2.8.4.0 or higher installed
    1) Download the latest version from our website on your device
    2) Reboot to TWRP
    3) Hit Install and tap the "Images..." button in the lower right
    4) Browse to the location of the TWRP image on your device and select it
    5) Select recovery from the partition list and swipe to flash
    OR:
    You can find more information and download links on our website.

    BUGS:
    If you have found a bug, please consider posting it to our github issues log. It's pretty much impossible for us to keep up with the more than 40 threads that we have for the devices that we "directly" support. If you have a significant problem that cannot be answered in this thread, your best bet is to PM me directly, contact us via our website, or find us in our IRC channel below. If you see someone that's struggling, feel free to point it out to us. We need your help to help us keep track of all of our devices! Thanks!

    SUPPORT:
    Live support is available via #twrp on Freenode with your IRC client or just click this link.
    19
    Here my flashable Zip.;)
    12
    New TWRP 2.6.3.0 is out. I attached a flashable zip.

    What's new in 2.6.3.0:


    • Proper backup and restore of SELinux contexts (thanks to Tassadar)
    • Pull in some ROM information for backup name generation
    • Merge all recent patches from AOSP bringing TWRP up to date with Android 4.3
    • Add 1200x1920 theme (thanks to Tassadar)
    • A few other fixes and tweaks
    source
    12
    Here the flashable version. Works fine in my N10.;)
    12
    New TWRP 2.6.1.0 available. Its attached.

    Source

    What's new in 2.6.1.0:


    • Initial SELinux support (only a few devices, need testers so come by IRC if your device doesn't have it and needs it)
    • Initial support for f2fs file system formatting (Moto X)
    • Update SuperSU install for 4.3 ROMs
    • Fixed a permissions bug on files created during backup
    • Fixed a bug that caused TWRP to not wait for compressed backups to finish causing 0 byte files and md5sums to not match
    • Fixed decryption of encrypted data so that both TouchWiz and AOSP decryption are possible
    • Ignore lost+found folder during backup and size calculations
    • Various other minor bug fixes and tweaks