[XMS] [MANY FIRMWARES] Deodex & SUPERUSERMOD

Search This thread

Nicklas Van Dam

Senior Member
Dec 14, 2013
2,829
1,381
25
Tangerang
github.com
Hey, I had a small doubt. My Xperia M is rooted with Xposed modules and CWM installed.
Will using the above method, change my phone in anyway. ie do I have to redo all Xposed Modules ? redo Root ? again customize my homescreen ?
Thank for your time and help

nope bro, deodexing will not change your present settings. it only change app from odexed to deodexed. not to change settings or anything because this not wipe your data, your settings will be change if you do wipe data to app or full wipe data for your system bro;)
 
  • Like
Reactions: raghu18

debaxish

Senior Member
May 16, 2013
94
10
shillong
DISCLAIMER: I am not responsible for you bricking your phone, applications stopping working on you phone or data wipes what may happen during the installs of these files. You are installing them at your own risk. Please make backups of the original files as I won't supply you with them.

Hi, I've deodexed the /system partition to the most recent update (at the time of writing), 15.4.A.1.9, of the Sony Xperia M SINGLE SIM.

The files have been taken from the C1904 ftf, but will work perfectly fine on the C1905 too. The deodexed files come in a neat .zip for if you have an unlocked bootloader, if you don't have an unlocked bootloader please refer to this guide on how to push the files to your device.

I have also modified the services.jar file to enable SUPERUSERMOD, just push the new file to your device and enjoy. You also need to be deodexed to use SUPERUSERMOD.

I will keep this thread updated if any new firmwares get released. Just check back after about a day and I should have them up for you. :)


15.4.A.0.23 Files:
Deodexed files
services.jar

15.4.A.1.9 Files:
Deodexed files
services.jar

15.4.A.1.10 Files:
Deodexed files
services.jar

I never actually stated how I made these files, for the deodexed files I used the Kamome tool (thanks for your tool @AndroPlus) and for the SUPERUSERMOD I followed the guide by @DavidMKD.

small clarification required, as per this thread, mentioned xxxx.9 is not for new 4.3. is it so? as it causes total haywire.. no buttons/status bar/stopping error etc. how do i get the new 4.3 deodexed for xxx.9

thx
 

gamer649

Senior Member
Feb 8, 2013
1,326
594
small clarification required, as per this thread, mentioned xxxx.9 is not for new 4.3. is it so? as it causes total haywire.. no buttons/status bar/stopping error etc. how do i get the new 4.3 deodexed for xxx.9

thx

Honestly? Please read the first post properly next time.

Follow this guide and use these files and DO NOT download any from the guide, use the ones I have just linked you to. Also, in the first post you can clearly see that I have posted files for the 15.4.A.1.9 firmware.

The files from the thread you linked were for the 15.4.A.0.23 firmware.
 

debaxish

Senior Member
May 16, 2013
94
10
shillong
Honestly? Please read the first post properly next time.

Follow this guide and use these files and DO NOT download any from the guide, use the ones I have just linked you to. Also, in the first post you can clearly see that I have posted files for the 15.4.A.1.9 firmware.

The files from the thread you linked were for the 15.4.A.0.23 firmware.

dear, thanks for time. here i have reported post applying your NOOB FRIENDLY method. everything went smooth untill reboot, and i ended up with no status bar/buttons etc and i have downloaded the attached files for xxx.9 only, i am not at a NOOB level that i can not differentiate the versions like xx.23,xx.9,xx.10.

if i am going by this method, phone automatically rebooted while pasting (after deleting), and ended up with same blank screen, where xx.9 was taken too. [i think it was uploaded by you only]

yeh, i read the first post properly, that's why i downloaded from there as it was from C1904 ftf 15.4.A.1.9. i am having the same phone with same ftf version [ C1904 - 1274-5477_R1C - 1272-2325_15.4.A.1.9 - WORLD-a_15.4.A.1.9 ].

how to push the services.jar. i will copy the file later. shall try this and post you the update.

update: steps completed without error .. thanks mate .
below is for SU, right.
Code:
su
stop
mount -o rw,remount /system
cp /ext_card/done_mod/* /system/framework/
mount -o ro,remount /system
reboot
 
Last edited:

xrayhr

Member
Dec 19, 2013
11
1
Zagreb
dear, thanks for time. here i have reported post applying your NOOB FRIENDLY method. everything went smooth untill reboot, and i ended up with no status bar/buttons etc and i have downloaded the attached files for xxx.9 only, i am not at a NOOB level that i can not differentiate the versions like xx.23,xx.9,xx.10.

if i am going by this method, phone automatically rebooted while pasting (after deleting), and ended up with same blank screen, where xx.9 was taken too. [i think it was uploaded by you only]

yeh, i read the first post properly, that's why i downloaded from there as it was from C1904 ftf 15.4.A.1.9. i am having the same phone with same ftf version [ C1904 - 1274-5477_R1C - 1272-2325_15.4.A.1.9 - WORLD-a_15.4.A.1.9 ].

how to push the services.jar. i will copy the file later. shall try this and post you the update.

update: steps completed without error .. thanks mate .
below is for SU, right.
Code:
su
stop
mount -o rw,remount /system
cp /ext_card/done_mod/* /system/framework/
mount -o ro,remount /system
reboot

I have the same problem. I have followed the same steps as you and i got the same result, no status bar/buttons etc. The funny thing is that i did this whole procedure four months ago, and everything went fine.
This time the only difference is that i debranded my phone with flashtool. The version of the rom is the same 15.4.A.1.9, only debranded. The first time everything went fine. Now i did it the same as the first time but its not working. I see that your succeeded when you changed the code. Can you explain to me what is different in this code. I didn't try it yet because i'm afraid that it will not work again, and than i must flash it again and root etc. Please help!

EDIT: I used the wrong files from this tutorial http://xdaforums.com/showthread.php?t=2729546 and these are for 15.4.A.0.23. I downloaded the right ones and this time everything went fine.
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 16
    DISCLAIMER: I am not responsible for you bricking your phone, applications stopping working on you phone or data wipes what may happen during the installs of these files. You are installing them at your own risk. Please make backups of the original files as I won't supply you with them.

    Hi, I've deodexed the /system partition to the most recent update (at the time of writing), 15.4.A.1.9, of the Sony Xperia M SINGLE SIM.

    The files have been taken from the C1904 ftf, but will work perfectly fine on the C1905 too. The deodexed files come in a neat .zip for if you have an unlocked bootloader, if you don't have an unlocked bootloader please refer to this guide on how to push the files to your device.

    I have also modified the services.jar file to enable SUPERUSERMOD, just push the new file to your device and enjoy. You also need to be deodexed to use SUPERUSERMOD.

    I will keep this thread updated if any new firmwares get released. Just check back after about a day and I should have them up for you. :)


    15.4.A.0.23 Files:
    Deodexed files
    services.jar

    15.4.A.1.9 Files:
    Deodexed files
    services.jar

    15.4.A.1.10 Files:
    Deodexed files
    services.jar

    I never actually stated how I made these files, for the deodexed files I used the Kamome tool (thanks for your tool @AndroPlus) and for the SUPERUSERMOD I followed the guide by @DavidMKD.
    1
    Are you sure this zip for 15.4.A.1.9? im applying this patch and Sony PCC saying 15.4.A.0.23. Why? Anyone had this problem?
    Yes, definitely for the 15.4.A.1.9 firmware. I downloaded the aforementioned firmware for the sole purpose of making these mods. I can only assume it is something in your build.prop why it is displaying like that. Try copying the original build.prop to your phone, setting the correct permissions and then rebooting.

    Hey, possible of you could make a whole system flashable from ftf? I don't have a computer to flash ftf :( much appreciated if you did :)
    If I can find one for an older firmware then I will. I don't wish to create one myself as I don't want to mess any of the coding up and have people bricking their phones.
    1
    Hi ...

    Sorry for my english, but I'm Polish and I write using a translator.

    I have a small problem: After replacing the services.jar file, grabbed my phone bootloop ... I tried different files - all the same ... What am I doing wrong?

    Xperia M, 4.3 JB

    Unfortunately this is common, have you tried pulling the battery and then restarting once it is put back in? Also, have you deodexed (or at least deleted the odex file to services.jar)? This is required, I suggest deodexing first and then replace the services.jar file.

    Polish translation (used Google translate so forgive if it is inaccurate):
    Niestety jest to powszechne, czy próbowałeś wyciągając baterię, a następnie ponowne uruchomienie po jego umieścić z powrotem w? Również, czy deodexed (lub przynajmniej usunięte pliki ODEX do services.jar)? Jest to konieczne, proponuję deodexing a potem zastąpić plik services.jar.
    1
    Próbowałem cały czas... Pełen root + deodex... Chciałem dodać sobie wygląd z Z2, jednak wersja, która działa (i nie potrzebuje superuser), jest niekompatybilna z Gravitybox... A do reszty potrzebuje superuser mod...

    I tried all the time ... Full root + deodex ... I wanted to add the look of Z2, but the version that works (and does not need superuser), is incompatible with Gravitybox ... And the rest needs superuser mod ...

    What is the state of your bootloader? Locked or unlocked? Are you trying to install the services.jar file at the same time as deodexing? What is your firmware/build number too?
    Also, off topic, remember that English messages go first and then messages of other languages.

    Jaki jest stan bootloadera? Zablokowane lub odblokowane? Czy próbujesz zainstalować plik services.jar w tym samym czasie, co deodexing? Jaki jest Twój numer firmware/budować zbyt?
    Ponadto, nie na temat, pamiętaj, że angielski wiadomości iść, a potem wiadomości z innych języków.
    1
    Bootloader unlocked... Firmware 15.4.A.1.9...

    First deodex, reboot and next service.jar...

    Wysłane z mojego C1904 przy użyciu Tapatalka

    Do you experience any problems once you reboot? Like any force closes or anything like that? If you can, use ADB to replace the services.jar with the following code;
    Code:
    su
    stop
    mount -o rw,remount /system
    cp (INSERT THE PATH TO YOUR services.jar FILE HERE, mine would be /sdcard1/services.jar) /system/framework/
    chmod 0644 /system/framework/services.jar
    mount -o ro,remount /system
    reboot

    Czy masz problemy po restarcie? Jak każdy zamyka życie lub coś podobnego? Jeśli możesz, użyj ADB zastąpić services.jar z następującego kodu;
    Code:
    su 
    stop
    mount-o rw,remount /system
    cp (wstawić ścieżkę do services.jar PLIK TUTAJ, kopalnia byłaby /sdcard1/services.jar) /system/framework/ 
    chmod 0644 /system/framework/services.jar 
    mount-o ro,remount /system
    reboot