[KERNEL][05.2][AOSP&SAMMY][APP/OTA/AUDIO] N.E.A.K. Note2 - Wanna Try? (v1.6x)

Status
Not open for further replies.
Search This thread

MarlinFF

Senior Member
Oct 31, 2010
623
116
Los Angeles
Oooooh. Ok. We were talking about a different thread. That's why I was so confused.

Ok, so the LED issue you guys have is when using all ROMs? Did you try using Light Manager? I'm curious, since I'm on Carbon nightlies with Neak 2.0.1 and have zero LED issues. I've been on Neak since 1.7 and haven't had any noticeable LED issues either.

All I've ever used was CM, so I cannot comment on other ROMS! I did try using LightFlow, and the same issue still occured. I actually flashed NEAK back an hour ago since the bug is fixed and I don't mind dealing with it for a few days until the update is released. The bug was weird because diffferent shades of the same color have different reactions in the end (I had one shade of green that would turn off after one blink, one that turned to red after like 10 blinks, one that would turn off after two, etc). I'm just glad it's fixed!
 

moSess

Senior Member
Nov 3, 2007
1,539
309
Queens
Samsung Galaxy Z Flip 4
Stock settings? :] I wanna go back on the NEAK kernel but it messes up the notification LEDs. Until that's fixed I'll be staying off it
I'm running PacMan and they have been a bit off.

I don't have any LED issues, but I use Light manager so maybe that overrides it.
I might try this

I don't have any LED issue either.

I have some.

Although I can't remember if they were present before NEAK
 

Jahape4

Member
Apr 27, 2009
46
35
Amish country, PA
Your battery will drain faster.

+1

According to the dev of the kernel normal/battery/gaming mode just locks in the CPU freqs differently, and also makes some slight governor tweaks.

Gaming mode set's CPU at min 500 - max 1600 (keeping your min freq at 500 will definitely drain your battery a good bit faster if left on always)
Normal mode keeps CPU at min 200 - max 1600
Battery mode set's CPU at min 200 - max 1000
 

chrisa887

Senior Member
Feb 25, 2012
3,345
945
wichita
Flashed latest kernel and my kernel usage Is high. 12% previous kernel was allay at 3%. This happening to anyone else?

Sent from my GT-N7105 using Tapatalk 4 Beta
 

edshawn911

Senior Member
Jun 21, 2010
487
50
Hey i was wondering. Why does my phone take so long to charge
On car charger since using this kernel. Also does anyone have
Any setting suggestions for uneak control app. Especially the audio
Settings. I just have no idea.. Thanks
 

cajunflavoredbob

Senior Member
May 1, 2010
9,938
6,465
Your Basement
Hey i was wondering. Why does my phone take so long to charge
On car charger since using this kernel. Also does anyone have
Any setting suggestions for uneak control app. Especially the audio
Settings. I just have no idea.. Thanks
What current output is your car charger rated for? Mine is 2.1mAh, so that's what I have my charging current set to in the UNEAK app. By default, I believe it's 1000mAh, which is rather low. If your charger is under 2 amps output, don't expect quick charging times.
 
  • Like
Reactions: edshawn911

blessup

Senior Member
Nov 26, 2010
577
43
Kernel is nice, battery life stock was average switched to lulzactive and wow insane battery saver. Only small hickup I have experienced so far is when streaming Pandora through headphone jack if someone text me it will sometimes lock the volume into the low faded state. If I switch the song or text myself it will boost the volume back up. Any ideas on this one?

Sent from my GT-N7105 using xda premium
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 33
    Angry [KERNEL][05.2][AOSP&SAMMY][APP/OTA/AUDIO] N.E.A.K. Note2 - Wanna Try? (v1.6x)



    Uploaded with ImageShack.us


    The Lightest Kernel for the N7100/5 Ever Made!!


    Features

    - Based on Samsung official sources (updated to N8000u1), updated to 3.0.58
    - Governors: PegasusQ (default), Ondemand, LulzactiveV2, Performance, Conservative (module), Lazy (module)
    - Schedulers: BFQv5, Noop, SIO, VR (default)
    - Using JRCU (++smoothness, ++responsiveness)
    - XZ Compression only for KERNEL (--size)
    - Fully compatible with: uNEAK ENGINE, MC Manager, Tegrak's Lulzactive app, Voltage Control, SetCPU, NSTools
    - Fully compatible with 4.1.2 ROMs
    - Fixed exynos-mem bug exploit (thx to Sammy)
    - Fixed SDS death bug (thx to Sammy)
    - Wolfson Audio Control (thx to AndiP for the implementation) ----> featured in uNEAK Engine

    RAMDISK AND MISC:
    - LED Fade support (thx to teamhacksung)
    - Init.d Support
    - CIFS and FUSE built in the kernel (no modules)
    - Android Logger (logcat) already enabled into the kernel
    - Multi-Core Interface (renewed Tegrak's 2ndCore) -----> CLICK HERE for infos
    - FSync Control Interface (thx to Ezekeel - featured into uNEAK Engine)
    - TouchBooster Control (thx to franciscofranco)
    - CM10.1 and derivates support (AOSP)

    CPU/GPU:
    - NO OC!!!! (200-1600Mhz)
    - CPU Undervolt support (thx to netarchy, Entropy512 & AndreiLux)
    - Complete control of freqs/voltages with Voltage Control/SetCPU/uNEAK
    - GPU Overclock/Undervolt & Stepcount Interface (by gm & AndreiLux)
    - Charging current interface support (original by gm, ported by me) ----> AC, USB, MISC and DOCK supported

    MEMORY & PERFORMACES:
    - ARM CPU Topology + Sched_MC (can be enabled via uNEAK Engine, disabled by default)
    - SLQB Memory Allocator (better memory management)
    - Improved memory management functions
    - Allow CPU Unaligned access (++performaces)
    - AFTR ARM Idle Mode (enable via uNEAK Engine) (++battery)

    CONNECTIVITY TWEAKS:
    - Stochastic Fair Blue NET Scheduler
    - Proportional Rate Reduction for TCP
    - Reduced debugging WiFi/BT
    - TCP/IP Tweaks
    - TCP buffer tweaks

    OPTIMIZATIONS:
    - NO EXFAT SUPPORT (do not even ask for it please)
    - Heavily reduced debug system (logcat and last_kmsg support is still there) (++speed, --size)
    - Heavily Optimised TouchBooster logic ----> greatly improved smoothness
    - SW Sync framework support
    - Using Standalone Hotplug driver with non-hotplug governors (thx to gm)
    - 3 CPU cores OFF when screen is locked (thx to arighi for original implementation) ----> with non-hotplug govs
    - Upstream patches and fixes from Linux mainline kernel
    - Compiled with Linaro GCC 4.7 (2012.12) + NEAK CFLAGS (heavily optimised) + Graphite Optimisations
    - Optimised EXT4 filesystem
    - Generally optimised code (removed useless functions and variables, fixed warnings)
    and many others...




    N7100 GSM RELEASES:


    v1.6x SAMSUNG FWs & Derivates Zip:: http://code.google.com/p/neak-kerne...il?name=N.E.A.K-Note2-1.6x-SAMMY.zip&can=2&q=

    v1.6x SAMSUNG FWs & Derivates TAR: http://code.google.com/p/neak-kerne...il?name=N.E.A.K-Note2-1.6x-SAMMY.tar&can=2&q=


    v1.6x CM10/CM10.1 & Derivates Zip: http://code.google.com/p/neak-kerne...ail?name=N.E.A.K-Note2-1.6x-AOSP.zip&can=2&q=


    v1.6x CM10/CM10.1 & Derivates TAR: [urlhttp://code.google.com/p/neak-kernel-note2/downloads/detail?name=N.E.A.K-Note2-1.6x-AOSP.tar&can=2&q=[/url]




    N7105 LTE RELEASES: "For T-mobile T889"


    v1.6x SAMSUNG FWs & Derivates Zip: http://code.google.com/p/neak-kerne...ame=N.E.A.K-Note2-1.6x-SAMMY-LTE.zip&can=2&q=


    v1.6x SAMSUNG FWs & Derivates TAR: http://code.google.com/p/neak-kerne...ame=N.E.A.K-Note2-1.6x-SAMMY-LTE.tar&can=2&q=


    v1.6x CM10.1 & Derivates Zip: http://code.google.com/p/neak-kerne...name=N.E.A.K-Note2-1.6x-AOSP-LTE.zip&can=2&q=


    v1.6x CM10.1 & Derivates TAR: http://code.google.com/p/neak-kerne...name=N.E.A.K-Note2-1.6x-AOSP-LTE.tar&can=2&q=


    CHANGELOG


    v1.6x (AOSP&SAMMY):
    Quote:
    KERNEL:
    - Should solve all the battery drain issues (hopefully)
    - Reverted some patch related to cpuidle and workqueue
    - Dynamically adjust cpufreq_max_limit according to scaling_max (Yank555)

    RAMDISKS:
    - Updates and refactorings of post-init tweaks (thx to dorimanx)




    v1.5x (AOSP&SAMMY):
    Quote:

    KERNEL:
    - Updated to Linux 3.0.61
    - Updated Wolfson Sound to 1.4.9
    - Should fix many mic problems (not tested tho)
    - BFQ updated to v5r1
    - Reworked voltages interface (thx to AndreiLux)
    - wakelock: use single threaded workqueueus

    RAMDISKS:
    - Updated CM10.1 ramdisks (AOSP)

    MISC:
    - Now releasing LTE AOSP version (AOSP)

    RAMDISKS:
    - post-init: allowing any kind of init.d script name
    - Updated CM10.1 ramdisks

    MISC:
    - Works with newest CM10.1 and derivates



    Please give all credits and thanks to "Simone201" this is his kernal, He was kind of enough to let me share his kernal to all of us!
    3
    Just to make sure 7105 flashable is compatible with T889 right?

    yes sir! :)
    3
    Maybe released tomorrow fingers crossed

    Sent from my SGH-T889 using Tapatalk 4
    3
    Didn't see the above post but thanks I will make a nandroid when I get home from work flash NEAK and see what kind of results I get with it.
    Currently I'm running carbonrom @1.1ghz and -100uv and it lasted me all day yesterday with about 30% to spare but it wasn't with heavy usage that happens occasionally with me throughout the day (5+ hours screen time).

    Sent from my GT-N7105 using Tapatalk 2

    FYI If you are using Carbon the Voodoo app will no longer work but you can get the uNEAK app on the market to control Wolfson (voodoo)

    Sent By An Idiot With A Phablet!