[TUTORIAL] Screen freezing after unlock problem solution

Search This thread

ZANKRUT.DOSHI

Senior Member
Feb 16, 2013
243
97
I have a screen freezing after unlock or call problem for months, tried differnt things like changing ROMs, lockscreen apps but none of them worked, my screen was still unresponsive for a while after unlocking screen, then i saw senaia's post about TP Calibration and tried, the problem is gone :) so i wrote this tutorial to help the others.
I take no responsibility for any DAMAGES or BRICKED phone, do it at your own risk
WARNING: This will ERASE all of your data, applications, sd card, messages, contacts etc. so make backups of them.

Here is step by step guide
DONT FORGET TO BACKUP
1. Make a goldcard using tutorial in this thread
2. Unrar attached file to the root of Goldcard
3. Power off phone, boot to bootloader with volume down and power button pressed
4. Wait for while it will search for files
5. Then a screen will show up like
Power => Reflash
Vol-Dn => DIAG
6. Press Volume Down for Diag
7. You will see a screen asking you to put phone on a flat surface, do what it says
8. Once that is done you will see a menu about Clear S58 Data, Ignore it, pull the battery and reboot
9. Repair is done, problem should be solved now :D

This is my first tutorial for XDA, so any suggestions are welcome
Thanks to senaia, he showed how to do :)


I flashed the htc android gold card given in your attached zip but it didnt wipe my sd card
i think problems gone but:p
 

ZANKRUT.DOSHI

Senior Member
Feb 16, 2013
243
97
I have a screen freezing after unlock or call problem for months, tried differnt things like changing ROMs, lockscreen apps but none of them worked, my screen was still unresponsive for a while after unlocking screen, then i saw senaia's post about TP Calibration and tried, the problem is gone :) so i wrote this tutorial to help the others.
I take no responsibility for any DAMAGES or BRICKED phone, do it at your own risk
WARNING: This will ERASE all of your data, applications, sd card, messages, contacts etc. so make backups of them.

Here is step by step guide
DONT FORGET TO BACKUP
1. Make a goldcard using tutorial in this thread
2. Unrar attached file to the root of Goldcard
3. Power off phone, boot to bootloader with volume down and power button pressed
4. Wait for while it will search for files
5. Then a screen will show up like
Power => Reflash
Vol-Dn => DIAG
6. Press Volume Down for Diag
7. You will see a screen asking you to put phone on a flat surface, do what it says
8. Once that is done you will see a menu about Clear S58 Data, Ignore it, pull the battery and reboot
9. Repair is done, problem should be solved now :D

This is my first tutorial for XDA, so any suggestions are welcome
Thanks to senaia, he showed how to do :)


HELLLLLLLLLLLP :(:(:(:( I WAS ON A CUSTOM ROM WHEN I FLASHED PG76DIAG.nbh AND NOW THE ROM IS NOT BOOTING

I TRIED AND FLASHED MANY ROMS BUT NONE OF THEM BOOTED
 

Retoman

New member
Aug 19, 2013
4
0
Jumping DIAG

Could someone please tell me what to do at this juncture. I created a gold card and placed the files into the root of my SD, then I booted into bootloader and let it do its thing but nothing seems to happen after the thing says "Jumping to DIAG..." nothing happens after that. I'm assuming it just froze so does anyone know what I should do?
 

hladilek

Member
Nov 12, 2010
10
0
partial solved

Hello!
I found strange results. I have to change digitizer, after that, only 10% of touchscreen worked (only on edges). I used this calibration procedure, and now, my digitizer works on 90%. It means, there is vertical 10mm unresponsive stripe in the middle of the screen. Tried to re-position flex cable, without success. I did calibration maybe 5 times. Any ideas?

Thanks!
 

hladilek

Member
Nov 12, 2010
10
0
Hello!
I found strange results. I have to change digitizer, after that, only 10% of touchscreen worked (only on edges). I used this calibration procedure, and now, my digitizer works on 90%. It means, there is vertical 10mm unresponsive stripe in the middle of the screen. Tried to re-position flex cable, without success. I did calibration maybe 5 times. Any ideas?

Thanks!

Heh! The problem was broken digitizer. I went into the shop, change digitizer and now, everything is good. Thanks for tutorial!
 

selva202

New member
Nov 21, 2013
1
0
freezing problem

having same problem htc wildfire s freezing while call and unlock pls help i make gold card and extracted tat zip file but in boot loader mode it shows update fail security fail ..i unlocked boot loader and rooted also..s on
 

bramz

Member
Jul 31, 2013
11
0
request for cid image

I have a screen freezing after unlock or call problem for months, tried differnt things like changing ROMs, lockscreen apps but none of them worked, my screen was still unresponsive for a while after unlocking screen, then i saw senaia's post about TP Calibration and tried, the problem is gone :) so i wrote this tutorial to help the others.
I take no responsibility for any DAMAGES or BRICKED phone, do it at your own risk
WARNING: This will ERASE all of your data, applications, sd card, messages, contacts etc. so make backups of them.

Here is step by step guide
DONT FORGET TO BACKUP
1. Make a goldcard using tutorial in this thread
2. Unrar attached file to the root of Goldcard
3. Power off phone, boot to bootloader with volume down and power button pressed
4. Wait for while it will search for files
5. Then a screen will show up like
Power => Reflash
Vol-Dn => DIAG
6. Press Volume Down for Diag
7. You will see a screen asking you to put phone on a flat surface, do what it says
8. Once that is done you will see a menu about Clear S58 Data, Ignore it, pull the battery and reboot
9. Repair is done, problem should be solved now :D

This is my first tutorial for XDA, so any suggestions are welcome
Thanks to senaia, he showed how to do :)

huygens.hoxnet. com/goldcard.html
 

1899

New member
Feb 4, 2014
2
1
Hello

Thanks for tuto.
I try but i have one problem, not possible to make goldcard because usb debbuging is not enabled. Not possible to enable because old touchscreen is trash and news don't work...

I have two wildfire S touchscreen broken. The broke touchscreen work before i remove. I replace by news but don't works. I buy four touchscreen at different supplier but don't work. I have this problem with two wildfire S.

Hard reset do nothing.

I try this soluce but not possible to make goldcard with Simplegoldcard or with adb command ( adb shell cat /sys/class/mmc_host/mmc1/mmc1:*/cid ) = phone not found...

Its wildfire S branded orange france.


Have u one solution please.
Thanks in advance.

---------- Post added at 04:12 AM ---------- Previous post was at 03:30 AM ----------

I found solo and ITS WORKEd!!


For get cid without touchscreen, just run this update (RUU_Marvel_S_HTC_Europe_2.13.401.3_Radio_47.23c.35.3037_7.54.39.28M_release_236989_signed.exe) BUT ONLY the one step, not click next... and the wildfire go on android device in device manager and Simplegoldcard reconize my htc.
Now one wildfire s work fine, i try other tomorrow...

What is the cost of Digitizer can you send me link
 

PiSpecialist

Senior Member
Jan 6, 2013
237
246
Valencia
htc desire s

I have a screen freezing after unlock or call problem for months, tried differnt things like changing ROMs, lockscreen apps but none of them worked, my screen was still unresponsive for a while after unlocking screen, then i saw senaia's post about TP Calibration and tried, the problem is gone :) so i wrote this tutorial to help the others.
I take no responsibility for any DAMAGES or BRICKED phone, do it at your own risk
WARNING: This will ERASE all of your data, applications, sd card, messages, contacts etc. so make backups of them.

Here is step by step guide
DONT FORGET TO BACKUP
1. Make a goldcard using tutorial in this thread
2. Unrar attached file to the root of Goldcard
3. Power off phone, boot to bootloader with volume down and power button pressed
4. Wait for while it will search for files
5. Then a screen will show up like
Power => Reflash
Vol-Dn => DIAG
6. Press Volume Down for Diag
7. You will see a screen asking you to put phone on a flat surface, do what it says
8. Once that is done you will see a menu about Clear S58 Data, Ignore it, pull the battery and reboot
9. Repair is done, problem should be solved now :D

This is my first tutorial for XDA, so any suggestions are welcome
Thanks to senaia, he showed how to do :)

the touch screen of my old htc desite s not responding sometimes until lock and unlock the display with power button, i tried your method but nothing happened in bootloader and after the htc splash i got half screen white without boot animations, after booting rom work as usual. you can provide the pg88diag.nbh for the desire s?? thanks in advance.
 
Last edited:

zzkew

New member
Feb 6, 2013
2
0
calibration

Hi!
The link for wfs calibration tool you posted above is no longer available on google drive. However, I got to get it... Can you please help?
 
Last edited:

random_pixel

New member
Aug 22, 2015
4
0
djelfa
Great

Hi!
The link for wfs calibration tool you posted above is no longer available on google drive. However, I got to get it... Can you please help?

this works for me, thanks a lot for the author,
note: the link of Goldcard image is dead , you can make Goldcard by this this tutorial:
-----wiki.cyanogenmod.org/w/Howto:_Goldcard-------
 

Top Liked Posts

  • There are no posts matching your filters.
  • 33
    I have a screen freezing after unlock or call problem for months, tried differnt things like changing ROMs, lockscreen apps but none of them worked, my screen was still unresponsive for a while after unlocking screen, then i saw senaia's post about TP Calibration and tried, the problem is gone :) so i wrote this tutorial to help the others.
    I take no responsibility for any DAMAGES or BRICKED phone, do it at your own risk
    WARNING: This will ERASE all of your data, applications, sd card, messages, contacts etc. so make backups of them.

    Here is step by step guide
    DONT FORGET TO BACKUP
    1. Make a goldcard using tutorial in this thread
    2. Unrar attached file to the root of Goldcard
    3. Power off phone, boot to bootloader with volume down and power button pressed
    4. Wait for while it will search for files
    5. Then a screen will show up like
    Power => Reflash
    Vol-Dn => DIAG
    6. Press Volume Down for Diag
    7. You will see a screen asking you to put phone on a flat surface, do what it says
    8. Once that is done you will see a menu about Clear S58 Data, Ignore it, pull the battery and reboot
    9. Repair is done, problem should be solved now :D

    This is my first tutorial for XDA, so any suggestions are welcome
    Thanks to senaia, he showed how to do :)
    2
    thanks for beer :)
    1
    IT works, finally!

    I can confirm that the tutorial made by mstfkaratas is working.
    Thank you, I cannot describe how much i appreciate it, my beer money is on it's way!
    1
    hi ivaxona your problem can be hardware related or an app you installed, i can suggest you install apps one by one and check the problem
    i cant help you more than this because i am not an expert :( this solution helped more than 5 phones AFAIK

    Sent from HTC WFS
    1
    http://www.filefactory.com/file/c0a...5.3035H_7.53.39.03M_release_225747_signed.exe

    this is 2.3.5 EU RUU from shipped roms thread, you can try this, if this doesnt work, there should be tutorials for how to install in this forum. i hope this helps

    edit: here is a thread about upgrading 2.3.5 http://xdaforums.com/showthread.php?t=1363693