[GUIDE] Restoring Stock ROM, Recovery, Unbrick, and Rooting 5.0 on Padfone S

Search This thread

ninekaw9

Senior Member
Feb 17, 2008
246
135
I had stuck on ASUS logo, after I do a lot of researches, a lot of trials and errors for 4 hours. I managed to fix them and I wanted to share how I did here.

Easiest way to root lollipop WW-12.2.2.27
use KingRoot from http://www.kingroot.net/down ,It is android app which will run exploit to root the device successfully.
Not Kingoroot Kingoroot was unable to root. Towelroot v1 works only on Kitkat, but not lollipop.

To boot into fastboot mode
adb reboot bootloader
OR turn off device, press and hold power and volume up, until asus logo appear, and stuck at asus logo, that is fastboot mode, to exit fastboot with buttons, press and hold vol down and power button.

To restore stock recovery and ROM after you install TWRP or CWM, or unbrick device
First, note that stock recovery from http://xdaforums.com/showpost.php?p=59055653&postcount=29, does not work for me (maybe everyone else as well).
I flashed it using fastboot flash recovery recovery.img, when I try to boot into recovery using, vol down and power, then select enter recovery, it stucks at asus logo.

First you need to flash TWRP_2.8.7.0.img from http://quarx2k.ru/asus_padfone_s/recovery/

using fastboot flash recovery TWRP_2.8.7.0.img It will show that flashing FAILED (remote: can't flash unsigned image), it fact, it was succeeded, now you can go ahead and boot to recovery.
Note that this version of TWRP, and 2.8.6.0, and CWM cannot successfully flash stock zip ROM, it may show errors, or when you try to boot the device, it will stuck at ASUS logo. But now, we are going to need TWRP_2.8.7.0 to unlock bootloader.

Let's unlock bootloader
simply flash http://quarx2k.ru/asus_padfone_s/CrowLock_RC3.zip with TWRP
You can check bootloader status with fastboot oem device-info
Before unlock :
(bootloader) Device unlocked: false
After unlock
(bootloader) Device unlocked: true

Let's flash stock Kitkat Firmware
You have to unlock bootloader becuase, well it is complicated.
The only TWRP recovery that can successfully flash stock .zip firmware from ASUS is http://datbak.com/links/padfone_s/asus_t00n_twrp_2_7_1_1.img
But this recovery has another bug, if you flash recovery and try to boot to recovery, you will get blank screen, but TWRP is indeed working, you touch the screen and it vibrates back. Anyway you have tofastboot flash recovery asus_t00n_twrp_2_7_1_1.img because it will be needed later for upgrading Kitkat to Lollipop.
If you don't unlock bootloader, you will not be able to boot into recovery directly without flashing to recovery partition Now let's get into fastboot mode, and fastboot boot asus_t00n_twrp_2_7_1_1.img, by booting into this recovery directly via fastboot without flashing it first, you will not get black screen bug of this recovery., if you boot to this recovery from recovery partition, you will get black screen as I told previously.
Now let's flash downgrade to 4.4.2 firmware from http://dlcdnet.asus.com/pub/ASUS/Mobile_Phone/PadFone_S/UL-ASUS_T00N-WW-99.99.99.0-user-wipedata.zip with TWRP 2.7.1.1.
This is for only WW SKU, not TW SKU. And all userdata will be wiped.
Browse all firmwares and there is TW SKU downgrade here : https://www.asus.com/Phone/PadFone_S_PF500KL/HelpDesk_Download/
Ok, now reboot to system, and yeah, it finally boots now.
The recovery is still TWRP, not stock one, let's upgrade to lollipop and restore stock recovery using TWRP. Simply place http://dlcdnet.asus.com/pub/ASUS/Mobile_Phone/PadFone_S/UL-ASUS_T00N-WW-12.2.2.27-user.zip to root of Internal Memory, unplug usb, press confirmation in notification to begin install lollipop. After device reboot, it will stay blank screen for 5 minutes, don't worry, it is updating to lollipop, after upgrade is done, it will reboot, and recovery will be restored to stock recovery now.
Bootloader is still unlocked.

Another method to root is
fastboot flash recovery asus_t00n_twrp_2_7_1_1.img (recovery is restored to stock now remember)
then flash https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1 with TWRP.

To lock bootloader again, boot into fastboot
then fastboot oem reset-dev_info
But I wouldn't recommend you to lock bootloader, you will lose ability to boot to TWRP recovery without replacing stock recovery, unless you are going to send your device to service center and claim warranty.
 
Last edited:

ninekaw9

Senior Member
Feb 17, 2008
246
135
It wont, using files from this thread might brick the device.

Sent from my SM-N910C using XDA Free mobile app
 

ChevanLemon

Senior Member
Jan 29, 2012
50
0
Hi im a noob so ill get straight to the point.
You said "Note that this version of TWRP, and 2.8.6.0, and CWM cannot successfully flash stock zip ROM, it may show errors, or when you try to boot the device, it will stuck at ASUS logo."
I have two question as follow:
1. So can i use twrp to flash stock rom or not?
2. Because I'm still at Kit Kat, I dont need to unlock bootloader and flash Kit Kat firmware right?
3. If so, Can I follow the tutorial until flashing the TWRP? but which TWRP that I need to install?
4. All these tutorial to unbrick needs to be done before you brick your phone right? What should i do if i already brick my phone?
Kindly advise.
 
Last edited:

ninekaw9

Senior Member
Feb 17, 2008
246
135
Hi im a noob so ill get straight to the point.
You said "Note that this version of TWRP, and 2.8.6.0, and CWM cannot successfully flash stock zip ROM, it may show errors, or when you try to boot the device, it will stuck at ASUS logo."
I have two question as follow:
1. So can i use twrp to flash stock rom or not?
2. Because I'm still at Kit Kat, I dont need to unlock bootloader and flash Kit Kat firmware right?
3. If so, Can I follow the tutorial until flashing the TWRP? but which TWRP that I need to install?
4. All these tutorial to unbrick needs to be done before you brick your phone right? What should i do if i already brick my phone?
Kindly advise.
The only TWRP recovery that can successfully flash stock .zip firmware from ASUS is asus_t00n_twrp_2_7_1_1.img
If you are bricked, but you can still access fastboot mode, then you can unbrick and reflash stock firmware to your phone
 

peterdavidlee

Member
Feb 23, 2015
29
4
First of all, Thank you so much for this GUIDE :)

Here are my doubts, and hoping for confirmation from you. My Padfone S is running well on latest kitkat firmware, rooted with SuperSu and TWRP 2.7.1.1 installed. Now, I wished to upgrade to Lollipop firmware.

Can I use the TWRP 2.7.1.1 to clean install the lollipop firmware instead of the stock recovery because I wished to wipe date, cache as well as SYSTEM before flashing?
My concern is I afraid if wipe the SYSTEM then the TWRP 2.7.1.1 would not be able to flash the Lollipop firmware successfully. Do I need to unlock bootloader in my case?

If I can do so, then can I still use the Flashify to flash TWRP 2.7.1.1 on the lollipop firmware, or I must use "fastboot flash recovery TWRP_2.8.7.0.img" method.

Thanks in advance for your kindly reply.:laugh:
 
Last edited:

tindan

Member
Mar 25, 2012
37
6
I had stuck on ASUS logo, after I do a lot of researches, a lot of trials and errors for 4 hours. I managed to fix them and I wanted to share how I did here.

Easiest way to root lollipop WW-12.2.2.27
use KingRoot from http://www.kingroot.net/down ,It is android app which will run exploit to root the device successfully.
Not Kingoroot Kingoroot was unable to root. Towelroot v1 works only on Kitkat, but not lollipop.

To boot into fastboot mode
adb reboot bootloader
OR turn off device, press and hold power and volume up, until asus logo appear, and stuck at asus logo, that is fastboot mode, to exit fastboot with buttons, press and hold vol down and power button.

To restore stock recovery and ROM after you install TWRP or CWM, or unbrick device
First, note that stock recovery from http://xdaforums.com/showpost.php?p=59055653&postcount=29, does not work for me (maybe everyone else as well).
I flashed it using fastboot flash recovery recovery.img, when I try to boot into recovery using, vol down and power, then select enter recovery, it stucks at asus logo.

First you need to flash TWRP_2.8.7.0.img from http://quarx2k.ru/asus_padfone_s/recovery/

using fastboot flash recovery TWRP_2.8.7.0.img It will show that flashing FAILED (remote: can't flash unsigned image), it fact, it was succeeded, now you can go ahead and boot to recovery.
Note that this version of TWRP, and 2.8.6.0, and CWM cannot successfully flash stock zip ROM, it may show errors, or when you try to boot the device, it will stuck at ASUS logo. But now, we are going to need TWRP_2.8.7.0 to unlock bootloader.

Let's unlock bootloader
simply flash http://quarx2k.ru/asus_padfone_s/CrowLock_RC3.zip with TWRP
You can check bootloader status with fastboot oem device-info
Before unlock :
(bootloader) Device unlocked: false
After unlock
(bootloader) Device unlocked: true

Let's flash stock Kitkat Firmware
You have to unlock bootloader becuase, well it is complicated.
The only TWRP recovery that can successfully flash stock .zip firmware from ASUS is http://datbak.com/links/padfone_s/asus_t00n_twrp_2_7_1_1.img
But this recovery has another bug, if you flash recovery and try to boot to recovery, you will get blank screen, but TWRP is indeed working, you touch the screen and it vibrates back. Anyway you have tofastboot flash recovery asus_t00n_twrp_2_7_1_1.img because it will be needed later for upgrading Kitkat to Lollipop.
If you don't unlock bootloader, you will not be able to boot into recovery directly without flashing to recovery partition Now let's get into fastboot mode, and fastboot boot asus_t00n_twrp_2_7_1_1.img, by booting into this recovery directly via fastboot without flashing it first, you will not get black screen bug of this recovery., if you boot to this recovery from recovery partition, you will get black screen as I told previously.
Now let's flash downgrade to 4.4.2 firmware from http://dlcdnet.asus.com/pub/ASUS/Mobile_Phone/PadFone_S/UL-ASUS_T00N-WW-99.99.99.0-user-wipedata.zip with TWRP 2.7.1.1.
This is for only WW SKU, not TW SKU. And all userdata will be wiped.
Browse all firmwares and there is TW SKU downgrade here : https://www.asus.com/Phone/PadFone_S_PF500KL/HelpDesk_Download/
Ok, now reboot to system, and yeah, it finally boots now.
The recovery is still TWRP, not stock one, let's upgrade to lollipop and restore stock recovery using TWRP. Simply place http://dlcdnet.asus.com/pub/ASUS/Mobile_Phone/PadFone_S/UL-ASUS_T00N-WW-12.2.2.27-user.zip to root of Internal Memory, unplug usb, press confirmation in notification to begin install lollipop. After device reboot, it will stay blank screen for 5 minutes, don't worry, it is updating to lollipop, after upgrade is done, it will reboot, and recovery will be restored to stock recovery now.
Bootloader is still unlocked.

Another method to root is
fastboot flash recovery asus_t00n_twrp_2_7_1_1.img (recovery is restored to stock now remember)
then flash https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1 with TWRP.

To lock bootloader again, boot into fastboot
then fastboot oem reset-dev_info
But I wouldn't recommend you to lock bootloader, you will lose ability to boot to TWRP recovery without replacing stock recovery, unless you are going to send your device to service center and claim warranty.

simply flash http://quarx2k.ru/asus_padfone_s/CrowLock_RC3.zip with TWRP --> link dead
 

owenfernaldi

Member
Jan 18, 2018
17
1
Hi thank for your guidance on how restoring stock rom . Im having trouble detecting my phone when in fastboot mode, as you said to boot up into fastboot hold vol up and power and we will stuck at asus logo , but after i connect my pc and using adb cmd fastboot devices it didnt detect any devices and cant proceed to next step when i need to fastboot boot twrp 2.7.1.1

Currently im using twrp 2.8.7.0 , i want to use stockcrom because i need to use my padfone station (since any custom rom is not compatible with padfone station), any suggestions for this problem ? Thanks in advabce
 

Top Liked Posts

  • There are no posts matching your filters.
  • 4
    I had stuck on ASUS logo, after I do a lot of researches, a lot of trials and errors for 4 hours. I managed to fix them and I wanted to share how I did here.

    Easiest way to root lollipop WW-12.2.2.27
    use KingRoot from http://www.kingroot.net/down ,It is android app which will run exploit to root the device successfully.
    Not Kingoroot Kingoroot was unable to root. Towelroot v1 works only on Kitkat, but not lollipop.

    To boot into fastboot mode
    adb reboot bootloader
    OR turn off device, press and hold power and volume up, until asus logo appear, and stuck at asus logo, that is fastboot mode, to exit fastboot with buttons, press and hold vol down and power button.

    To restore stock recovery and ROM after you install TWRP or CWM, or unbrick device
    First, note that stock recovery from http://xdaforums.com/showpost.php?p=59055653&postcount=29, does not work for me (maybe everyone else as well).
    I flashed it using fastboot flash recovery recovery.img, when I try to boot into recovery using, vol down and power, then select enter recovery, it stucks at asus logo.

    First you need to flash TWRP_2.8.7.0.img from http://quarx2k.ru/asus_padfone_s/recovery/

    using fastboot flash recovery TWRP_2.8.7.0.img It will show that flashing FAILED (remote: can't flash unsigned image), it fact, it was succeeded, now you can go ahead and boot to recovery.
    Note that this version of TWRP, and 2.8.6.0, and CWM cannot successfully flash stock zip ROM, it may show errors, or when you try to boot the device, it will stuck at ASUS logo. But now, we are going to need TWRP_2.8.7.0 to unlock bootloader.

    Let's unlock bootloader
    simply flash http://quarx2k.ru/asus_padfone_s/CrowLock_RC3.zip with TWRP
    You can check bootloader status with fastboot oem device-info
    Before unlock :
    (bootloader) Device unlocked: false
    After unlock
    (bootloader) Device unlocked: true

    Let's flash stock Kitkat Firmware
    You have to unlock bootloader becuase, well it is complicated.
    The only TWRP recovery that can successfully flash stock .zip firmware from ASUS is http://datbak.com/links/padfone_s/asus_t00n_twrp_2_7_1_1.img
    But this recovery has another bug, if you flash recovery and try to boot to recovery, you will get blank screen, but TWRP is indeed working, you touch the screen and it vibrates back. Anyway you have tofastboot flash recovery asus_t00n_twrp_2_7_1_1.img because it will be needed later for upgrading Kitkat to Lollipop.
    If you don't unlock bootloader, you will not be able to boot into recovery directly without flashing to recovery partition Now let's get into fastboot mode, and fastboot boot asus_t00n_twrp_2_7_1_1.img, by booting into this recovery directly via fastboot without flashing it first, you will not get black screen bug of this recovery., if you boot to this recovery from recovery partition, you will get black screen as I told previously.
    Now let's flash downgrade to 4.4.2 firmware from http://dlcdnet.asus.com/pub/ASUS/Mobile_Phone/PadFone_S/UL-ASUS_T00N-WW-99.99.99.0-user-wipedata.zip with TWRP 2.7.1.1.
    This is for only WW SKU, not TW SKU. And all userdata will be wiped.
    Browse all firmwares and there is TW SKU downgrade here : https://www.asus.com/Phone/PadFone_S_PF500KL/HelpDesk_Download/
    Ok, now reboot to system, and yeah, it finally boots now.
    The recovery is still TWRP, not stock one, let's upgrade to lollipop and restore stock recovery using TWRP. Simply place http://dlcdnet.asus.com/pub/ASUS/Mobile_Phone/PadFone_S/UL-ASUS_T00N-WW-12.2.2.27-user.zip to root of Internal Memory, unplug usb, press confirmation in notification to begin install lollipop. After device reboot, it will stay blank screen for 5 minutes, don't worry, it is updating to lollipop, after upgrade is done, it will reboot, and recovery will be restored to stock recovery now.
    Bootloader is still unlocked.

    Another method to root is
    fastboot flash recovery asus_t00n_twrp_2_7_1_1.img (recovery is restored to stock now remember)
    then flash https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1 with TWRP.

    To lock bootloader again, boot into fastboot
    then fastboot oem reset-dev_info
    But I wouldn't recommend you to lock bootloader, you will lose ability to boot to TWRP recovery without replacing stock recovery, unless you are going to send your device to service center and claim warranty.
    1
    Files, fastboot and recoveries and bootloader unlock and super su for rooting

    asus_t00n_twrp_2_7_1_1.rar https://mega.nz/#!355UmTCb!0Jn-0wlbGHG7lir8u9vq1l8BrR3dsepDdigqfJ9wRPk
    twrp_2.8.7.0.rar https://mega.nz/#!GwRRBBjT!8ms39GK62XHairHOrxlmNJCwA-bDeaKA816Cg4lsQr0