Originally Posted by Theshawty
Mustn't revone be initialized with "./revone -P" first? That however doesn't work on 1.54.
>> Sent from the abyss <<
You are correct (i think!).
- What I did was get JCARD s-off
- download and install RUU (RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13 .3231.27_10.31.1131.05_release_310878_signed.exe)
- unlock and root
- s-on using fastboot
- I then did the ./revone -P command (whilst on 1.44 and using the SU command, as opposed to motochopper root, which didnt work)
- s-off using revone
- flashed ARHD 4.3, updated firmware etc
I say I think you are correct, as I have not tried to use revone to relock/lock/unlock without performing the ./revone -P command on 1.44, so I cant absolutely state that it is a required step.
However unless you use revone, you have no facility to change your boot status to locked again.
It would be good for someone to test who has JCARD s-off on 1.54 who has not done the ./revone -P command. I cant test using my device now as it is now a revone s-off device.