Straight Talk SGS2- SGH-S959G

Search This thread

mrdreamers

Senior Member
Oct 16, 2009
1,002
64
Texas
Help plz!

I NOR ANYONE ELSE BUT YOURSELF IS RESPONSIBLE FOR ANY DAMAGES, LOSS, OR ANYTHING ELSE THAT MAY RESULTS FROM FOLLOWING THE INSTRUCTIONS, OR USING ANYTHING FOUND ON THIS PAGE ----USE AT YOUR OWN RISK----


FACTORY FIRMWARE (IN CASE OF SOFT-BRICK) ---CREDIT--- eclipsedarkmoon
This will only work with Heimdall- https://github.com/Benjamin-Dobell/Heimdall/downloads
-Download Heimdall 1.31
-Download Factory Firmware - http://xdaforums.com/showthread.php?p=35489258
-Open Heimdall, click Drivers, zadig.exe
-Put phone in Download Mode--Power off, Hold volume down button, Plug in USB connected to computer, Hit volume up when prompted
-zadig.exe menu, List all devices, Choose Samsung USB composite device (or similar) from list, Press Install Drivers (if you receive a message about being unable to verify the publisher of the driver click "Install this driver software anyway". Your computer may also need to restart for this).
-Now open heimdall-frontend.exe, on the Load Package (main page) select Browse from Heimdall firmware package, Select the Factory Firmware you downloaded earlier (it will take a minute while Heimdall extracts it), Once extracted press Load / Customise in the bottom right corner (this takes you to the Flash page),--- Select FACTORYFS in the box on the right labeled Partitions(Files), DO NOT TOUCH ANYTHING ELSE- MAKE SURE REPARTITION AND NO REBOOT ARE---- NOT----- CHECKED.... Press Start in the bottom right corner. (It will take a few minutes to load everything do not touch your computer or the phone during any of this, after the phone re-boots it may take a few minutes to load back up leave it alone until it has fully started up and at the home screen).
-Hopefully it has been brought back from the Dead.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

ROOT
-Download and install Samsung Drivers- http://www.samsung.com/us/support/owners/product/SGH-S959ZKATFN
-Download Odin 1.85- View attachment 1605837
-Download DD_01232012.tar (it's the top one) From here Courtesy Entropy512- http://xdaforums.com/showthread.php?p=18129028
-Download SuperOneClick- http://xdaforums.com/showthread.php?p=8532790
-Put your phone in Download Mode --Power off, Hold volume down button, Plug in USB connected to computer, Hit volume up when prompted
-Open Odin folder, Click Odin3 v1.85.exe, With your phone connected the box under ID:COM should be yellow (if it's not you missed a step earlier), Click PDA, Select the (DD_01232012.tar) file you downloaded earlier, DO NOT TOUCH ANYTHING ELSE- MAKE SURE AUTO REBOOT AND F. RESET TIME ARE THE ----ONLY----- THINGS CHECKED----- AND RE-PARTITION AND FLASH LOCK ARE ----NOT---- CHECKED....., Press Start (It will take a few minutes to load everything do not touch your computer or the phone during any of this, after the phone re-boots it may take a few minutes to load back up leave it alone until it has fully started up and at the home screen). You should get a green PASS message in the top box. (installing this custom kernel WILL give you the YELLOW TRIANGLE boot screen, we can get rid of that later if it bothers you)
-Open SuperOneClick folder, on the phone go to Setting- Applications click Unknown sources- then Development click USB debugging, Connect the phone to the computer, Click on the runme.bat in the SuperOneClick folder (I used the one from DOOMLORD EASY ROOTING TOOLKIT- http://xdaforums.com/showthread.php?p=18805532 SuperOneClick may be a little different, if it is follow their instructions on the page) , ----Follow the instructions on the pop-up window.
-CONGRATULATIONS you should now have root.

More to come.......

can i use hiemdall instead to root? im not getting the little yellow box anymore in odin:confused:
 
Last edited:

cynnar

Senior Member
Aug 23, 2010
171
186
Grapevine
CyanogenMod 10.1 Nightly up and running :D

I need someone who knows what they are doing to test carrier services, calling/data.

Instructions:

Download CyanogenMod for the i777 and Gapps

Extract the boot.img from the CyanogenMod zip and flash that to recovery. (dd if=/sdcard/boot.img of=/dev/block/mmcblk0p6)

Extract the /system/build.prop file from the CyanogenMod zip and replace the one in your phones /system folder with it.

Copy the CyanogenMod and Gapps zips to your SD Card. Reboot to recovery, flash CyanogenMod then Gapps.

I had to factory reset and wipe cache to get it to fully boot the first time after flashing. If you try this from stock you might not have to, if you get the CM logo boot loop, you have to.

Add the Straight Talk APN.

Optional: Install Triangle Away.


Thanks Entropy for the guidance!

It install great, but there is no data. after setting up the apn I went to settings -> advanced and tried all three raido settings with no luck.
I'm not missing another setting somewhere am I?
Calls do work both incoming and outgoing.
sms works but not mms (this uses data to send though correct?)
triangle away did reset the counter.
 

r00t4rd3d

Senior Member
Try this one:

Name: StraightTalk ATT
APN: att.mvno
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMSC proxy: 66.209.11.33
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: Not set
APN type: default,supl,mms
APN protocol: IPv4
APN enable/disable: APN enabled (tick mark checked but grayed out anyways)
Bearer: Unspecified
 

Napsterbater

Senior Member
Jul 31, 2011
65
22
Milledgeville GA
www.napshome.net
Remember that keeping the proxy is going to allow ST to keep track of your data usage and potentially lead to being throttled.

Sent from my SGH-S959G using xda app-developers app

I never have had the proxy in my APN yet I get throttled if I have a heavy data day. But when not throttled the APN with No Proxy seems to work better the with the proxy.
 

cynnar

Senior Member
Aug 23, 2010
171
186
Grapevine
Try this one:

Name: StraightTalk ATT
APN: att.mvno
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMSC proxy: 66.209.11.33
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: Not set
APN type: default,supl,mms
APN protocol: IPv4
APN enable/disable: APN enabled (tick mark checked but grayed out anyways)
Bearer: Unspecified

still no data :(
 

r00t4rd3d

Senior Member
Just seen this one:

Name: ST (or whatever you want)
APN: att.mvno
Proxy: proxy.mvno.tracfone.com
Port: 80
Username: Not set
Password: Not set
Server: Not set
MMSC: http: mmsc. cingular. com (**no spaces and no"//"**)
MMSC proxy: 66.209.11.33
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: Not set
APN type: default,supl,mms
APN protocol: IPv4
Bearer: Not specified
 
  • Like
Reactions: pearlwhitemike

mr-cook

Senior Member
Nov 4, 2012
987
2,046
Apn should be - wap.tracfone everything else is the same.
Att.mvno only works with the BYOP sim cards.
Sent from my SGH-S959G
 
Last edited:

Spinergy02

Senior Member
Dec 29, 2012
303
76
Here's mine

APN: wap.tracfone
Port: 80
MMSC: http://mmsc.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
APN Type: default,supl,mms

All other fields are left blank

Sent from my SGH-S959G using xda app-developers app
 

cynnar

Senior Member
Aug 23, 2010
171
186
Grapevine
Apn should be - wap.tracfone everything else is the same.
Att.mvno only works with the BYOP sim cards.
Sent from my SGH-S959G

Here's mine

APN: wap.tracfone
Port: 80
MMSC: http://mmsc.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
APN Type: default,supl,mms

All other fields are left blank

Sent from my SGH-S959G using xda app-developers app

I won't argue either way if Att.mvno does or does not only work with BYOP, but wap.tracfone setting brought data to the phone
 
Last edited:

mr-cook

Senior Member
Nov 4, 2012
987
2,046
Cynnar can you make a flashable zip of this from your phone with the changes already made?

Sent from my SGH-S959G
 
Last edited:

Entropy512

Senior Recognized Developer
Aug 31, 2007
14,088
25,086
Owego, NY
CyanogenMod 10.1 Nightly up and running :D

I need someone who knows what they are doing to test carrier services, calling/data.

Instructions:

Download CyanogenMod for the i777 and Gapps

Extract the boot.img from the CyanogenMod zip and flash that to recovery. (dd if=/sdcard/boot.img of=/dev/block/mmcblk0p6)

Extract the /system/build.prop file from the CyanogenMod zip and replace the one in your phones /system folder with it.

Copy the CyanogenMod and Gapps zips to your SD Card. Reboot to recovery, flash CyanogenMod then Gapps.

I had to factory reset and wipe cache to get it to fully boot the first time after flashing. If you try this from stock you might not have to, if you get the CM logo boot loop, you have to.

Add the Straight Talk APN - See Below

Optional: Install Triangle Away.


Thanks Entropy for the guidance!

Code:
[B]Straight Talk APN[/B]
Name: Straight Talk
APN: wap.tracfone
Port: 80
MMSC: http://mmsc.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
APN Type: default,supl,mms
Ignore the build.prop hacking starting tomorrow.

http://review.cyanogenmod.org/#/c/29533/
 
  • Like
Reactions: pearlwhitemike

r00t4rd3d

Senior Member
Last edited:
  • Like
Reactions: pearlwhitemike

pcmediciowa

New member
Sep 5, 2012
4
1
Cedar Rapids
CRSmartphone.com
Can't Register on Network Error

I have flashed the stock, then Entropy's kernel, then rooted one click. None of the unlock tools work. I can't get any of my active SIMS: iWireless, T Mobile, Net 10, AT&T sims to register on any network on this phone. I am new in here and MAN thank you guys so much for the development on this phone thus far.
I have a couple of customer's that have brought me bricks and things are really looking up.
Does anyone know what I can do to remedy this deal? I get 5 signal bars, before inserting any SIM. With all of the SIMS in, I get various signal strength, but all show signal.
Just all return that pesky Can't Register on Network error.
BTW Entropy I can do any experimenting you need done. I reall appreciate y'all senior members jumping in and moving this phone forward.

:good:
 

r00t4rd3d

Senior Member
The fastest way to get from stock to CyanogenMod 10.1 Nightly.

With Odin flash this in the PDA slot - http://d-h.st/Id6 (This is the newest version of ClockWorkMod Recovery required to flash CM10.1)

Download these two zips and place them on your SD Card - CyanogenMod 10.1 Nightly and GAPPS

Boot into Recovery , first thing to do is a factory reset and wipe the cache then install the CyanogenMod zip then the GAPPS zip and finally reboot.


:cowboy:

Code:
[B]Straight Talk APN[/B]
Name: Straight Talk
APN: wap.tracfone
Port: 80
MMSC: http://mmsc.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
APN Type: default,supl,mms
 
Last edited:

Entropy512

Senior Recognized Developer
Aug 31, 2007
14,088
25,086
Owego, NY
The fastest way to get from stock to CyanogenMod 10.1 Nightly.

With Odin flash this in the PDA slot - http://d-h.st/Id6 (This is the newest version of ClockWorkMod Recovery required to flash CM10.1)

Download these two zips and place them on your SD Card - CyanogenMod 10.1 Nightly and GAPPS

Boot into Recovery , install the CyanogenMod zip first then the GAPPS zip then factory reset/wipe the cache and finally reboot.


:cowboy:

Code:
[B]Straight Talk APN[/B]
Name: Straight Talk
APN: wap.tracfone
Port: 80
MMSC: http://mmsc.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
APN Type: default,supl,mms
Please don't link directly to jenkins - link to http://www.get.cm/?device=i777 instead

For those with triangles triggered, TriangleAway SHOULD work from within CM.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 85
    I NOR ANYONE ELSE BUT YOURSELF IS RESPONSIBLE FOR ANY DAMAGES, LOSS, OR ANYTHING ELSE THAT MAY RESULTS FROM FOLLOWING THE INSTRUCTIONS, OR USING ANYTHING FOUND ON THIS PAGE ----USE AT YOUR OWN RISK----


    CONSIDER THIS THE ONLY VALID POST IN THIS THREAD- EVERYTHING AFTER THIS POST COULD BE INCORRECT
    ALL DANGEROUS LINKS HAVE BEEN REMOVED. IF I MISSED ANYTHING, AND A LINK TAKES YOU TO DEV-HOST- PLEASE CLOSE THE PAGE IMMEDIATELY, NONE OF THE LINK ON THAT SITE ARE SAFE!!!! If you're looking for one of the missing files try asking in the thread someone may still have them.
    If your using the information on this page please remember to HIT THE THANKS BUTTON.

    THIS IS ONLY FOR THE STRAIGHT TALK S2 MODEL# SGH-S959G...... NOT COMPATIBLE WITH ANY OTHER PHONE.

    THE BEST WAY TO ROOT / OR FLASH A CUSTOM ROM -
    Install RECOVERY using ODIN, make a BACKUP, then flash the ROOT ZIP in RECOVERY.
    - TWRP 2.7.1.0 Odin-
    - Make a backup with TWRP before going any further. Boot into recovery, select backup/ restore, backup.
    - Root Zip- flash zip through CWM thanks to cynnar-
    Mirror-
    -You will need to install busybox from the market if staying on stock+ root.
    - PhilZ CWM v6.0.2.7 If you will be using a Siyah based kernel ( AJK Kernel ), or would like the extra options in CWM flash this- View attachment 1703135

    If you prefer CWM flashable zips can be found further down, and throughout the thread (search).


    - ROMs
    - I777 Main Thread- http://xdaforums.com/forumdisplay.php?f=1301 (Android Development, and Ported Development to find ROMs)
    - OR flash CyanogenMod 10.1 from link below (this is flashed in CWM) From CyanogenMod 10.1 all i777 custom ROMs are compatible.
    - CyanogenMod, and most all custom ROMs are already rooted when you flash them, no need to root first.
    - You may need to change your APN for data to work with some custom ROMs. Stock APN is at the bottom of this post. Usually you can just edit the included APN from att.mvno to wap.tracfone , and save it, then select it. If data still doesn't work delete all other APNs besides the one you're using.


    - ODIN INSTRUCTIONS -
    - Samsung drivers must be installed on your computer- Samsung Drivers- http://www.samsung.com/us/support/owners/product/SGH-S959ZKATFN
    - Download Odin 1.85- View attachment Odin3-v1.85.7z and unzip.
    - Enable USB Debugging in Settings menu of phone.
    - Put your phone in Download Mode - -Power off, Hold volume down button, Plug in USB connected to computer, Hit volume up when prompted.
    - Open Odin folder, Click Odin3 v1.85.exe, With your phone connected the box under ID:COM should be yellow (if it's not you missed a step earlier), Click PDA, Select the file you downloaded earlier, DO NOT TOUCH ANYTHING ELSE- MAKE SURE AUTO REBOOT AND F. RESET TIME ARE THE ----ONLY----- THINGS CHECKED----- AND RE-PARTITION AND FLASH LOCK ARE ----NOT---- CHECKED....., Press Start (It will take a few minutes to load everything do not touch your computer or the phone during any of this, after the phone re-boots it may take a few minutes to load back up leave it alone until it has fully started up and at the home screen). You should get a green PASS message in the top box.


    - CWM ZIP FLASHING -
    - Save Zip file to be flashed to the Root (not in a folder) of your External SD card
    - BOOT INTO RECOVERY- Phone off
    - Hold volume up, volume down and power button. (You can release just the power button at the samsung screen but dont have to).
    - Select -install zip from sdcard, -choose zip from sdcard, -select the zip file you put there earlier, -it will ask you to confirm, select -yes -install
    - If you are installing a custom ROM Do this FIRST before installing Zip, -wipe data/factory reset, wipe cache partition, select -advanced, -wipe dalvik cache


    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    FACTORY FIRMWARE (IN CASE OF SOFT-BRICK)
    Before returning to Stock remember to format your preload partition. This can be achevied with my ROM wipe script found here- http://xdaforums.com/showthread.php?p=38199542

    ---CREDIT--- eclipsedarkmoon
    This will only work with Heimdall-
    - Download Heimdall 1.3.1-
    Heimdall Suite 1.3.1 Windows https://github.com/downloads/Benjamin-Dobell/Heimdall/heimdall-suite-1.3.1-win32.zip
    Heimdall Suite 1.3.1 OS X 10.4+ https://github.com/downloads/Benjamin-Dobell/Heimdall/heimdall-suite-1.3.1-mac.dmg

    - Download Factory Firmware -

    - Mirror-

    - Open Heimdall, click Drivers, zadig.exe
    - Put phone in Download Mode--Power off, Hold volume down button, Plug in USB connected to computer, Hit volume up when prompted
    - zadig.exe menu, List all devices, Choose Samsung USB composite device (or similar) from list, Press Install Drivers (if you receive a message about being unable to verify the publisher of the driver click "Install this driver software anyway". Your computer may also need to restart for this).
    - Now open heimdall-frontend.exe, on the Load Package (main page) select Browse from Heimdall firmware package, Select the Factory Firmware you downloaded earlier (it will take a minute while Heimdall extracts it), Once extracted press Load / Customise in the bottom right corner (this takes you to the Flash page),--- Select FACTORYFS in the box on the right labeled Partitions(Files), DO NOT TOUCH ANYTHING ELSE- MAKE SURE REPARTITION AND NO REBOOT ARE---- NOT----- CHECKED.... Press Start in the bottom right corner. (It will take a few minutes to load everything do not touch your computer or the phone during any of this, after the phone re-boots it may take a few minutes to load back up leave it alone until it has fully started up and at the home screen).
    - Hopefully it has been brought back from the Dead.

    - Odin flashable Factory Firmware -thanks to root4rd3d-
    Uncompressed version-
    - Put your phone in Download Mode --Power off, Hold volume down button, Plug in USB connected to computer, Hit volume up when prompted
    - Open Odin folder, Click Odin3 v1.85.exe, With your phone connected the box under ID:COM should be yellow (if it's not you missed a step earlier), Click PDA, Select the file you downloaded earlier, DO NOT TOUCH ANYTHING ELSE- MAKE SURE AUTO REBOOT AND F. RESET TIME ARE THE ----ONLY----- THINGS CHECKED----- AND RE-PARTITION AND FLASH LOCK ARE ----NOT---- CHECKED....., Press Start (It will take a few minutes to load everything do not touch your computer or the phone during any of this, after the phone re-boots it may take a few minutes to load back up leave it alone until it has fully started up and at the home screen). You should get a green PASS message in the top box.

    - STOCK ROM CWM FLASH -thanks to mr-cook
    (this is will not change your recovery or modem)
    - Download-
    - Place on the root of your Ext.SD
    - Boot into CWM recovery (if you can't do this start at the top of the page!)
    - Factory reset * Wipe cache * Wipe dalvik cache
    - Install zip from sdcard, choose zip from sdcard, select zip you downloaded earlier, confirm install
    - Reboot
    - STOCK MODEM- View attachment S959GUDLG1_modem.zip
    - STOCK 3e RECOVERY Not sure why you would want it, but just in case- removed (YOU MUST FLASH THIS LAST TO RETURN TO STOCK)-


    - IF YOU GET BOOT-LOOP- Boot into recovery
    - Phone off
    - Hold volume up, volume down and power button. (You can release just the power button at the samsung screen but dont have to).
    - Factory reset, wipe cache
    - Reboot

    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


    ROOT ZIP-
    Flash through CWM thanks to cynnar- View attachment SGH-S959G_Root.zip

    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


    SGH-S959G - CyanogenMod

    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


    MODEMS
    (Install with CWM)
    -I777UCMD8- This is the Newest Available

    - Stock- S959GUDLG1 thanks to mr-cook- View attachment S959GUDLG1_modem.zip

    - I777UCLL6- ATT UCLL6 thanks to mr-cook- View attachment I777UCLL6_modem.zip

    - I777UCLK3- ATT UCLK3 thanks to mr-cook- View attachment I777UCLK3_modem.zip

    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


    REMOVING THE YELLOW TRIANGLE

    GINGERBREAD ONLY! (Root Required)
    - Extract the stock zImage from the factory firmware at the top of this page (I used 7zip, and needed to extract it twice to get it apart).
    - Put the stock zImage on the root (not in a folder) of your internal SD card. You can do this through the usb, adb push (adb push- Copy and paste the zImage into your folder with adb, connect your phone with usb, then command- adb push zImage /sdcard/zImage), whatever method you like.
    - Now using adb shell, or terminal emulator found in the market (if you don't' have adb ask GOOGLE) issue the command (capitilazation and spacing matter):

    $ adb shell
    $ su
    # dd if=/sdcard/zImage of=/dev/block/mmcblk0p5

    This must be done as #, if you have a $ enter command: su
    You must already be rooted for this to work. To switch to a different kernel afterwards you can use the same method, or CWM without getting the yellow triangle again or increasing the flash counter. As long as you flash internally, if you use Odin or Heimdall to flash anything thats not stock it will come back.


    REMOVING YELLOW TRIANGLE ICS AND ABOVE!
    -If running ICS or above you can use triangle away found here- http://xdaforums.com/showthread.php?p=22462960

    -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


    CWM
    Flash these from CWM

    CWM RECOVERY v6.0.2.7 (ODIN flash) Thanks to r00t4rd3d-

    - PhilZ CWM v6.0.2.7 built by AJ Newkirk- (Thanks to mr-cook)- View attachment 1703135 (This is compatible with AJ Newkirks Siyah kernel and jeboo's new features in SHOstock3)
    - Phil's CWM v6.0.2.7 built by AJ Newkirk- (Thanks to mr-cook)-this one gets rid of the blue progress bar on the s2 boot screen, that's the only difference.

    - CWM v6.0.2.7- (Thanks to mr-cook)- View attachment 1703137

    -6.0.4.4 Odin-

    - CWM v6.0.4.4- (Thanks to mr-cook)- View attachment 2387202

    -6.0.4.5 Odin-

    -6.0.4.5 zip-


    -AJK CWM Odin-


    -TWRP 2.7.0.0 recovery "thanks to razen kain" (flash from recovery)-
    Let me know if this link gets killed and I'll add it to Dev host.

    Flashing other versions of CWM with adb (Root Required)
    - Extract the zImage (boot.img) from the ROM of your choice (I use 7zip to extract it).
    - Put the zImage (boot.img) on the root (not in a folder) of your internal SD card. You can do this through the usb, adb push (adb push- Copy and paste the zImage into your folder with adb, connect your phone with usb, then command- adb push zImage /sdcard/zImage), whatever method you like.
    - Now using adb shell (if you don't' have adb ask GOOGLE) issue the command (capitilazation and spacing matter):


    $ adb shell
    $ su
    # dd if=/sdcard/zImage of=/dev/block/mmcblk0p6

    or if it's a boot.img

    # dd if=/sdcard/boot.img of=/dev/block/mmcblk0p6



    -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    ADB (android debug bridge)

    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    STOCK APN
    APN
    Name- Straight Talk
    APN- wap.tracfone
    Proxy- Not set
    Port- Not set
    User name- Not set
    Password- Not set
    Server- Not set
    MMSC- http://mmsc.cingular.com/
    MMS proxy- mms2.tracfone.com
    MMS port- 80
    MCC- 310
    MNC- 410
    Authentication type- Not set
    APN type- default,supl,mms


    BYOP sim card APN
    APN
    Name- Straight Talk
    APN- att.mvno
    Proxy- Not set
    Port- Not set
    User name- Not set
    Password- Not set
    Server- Not set
    MMSC- http://mmsc.cingular.com/
    MMS proxy- mms2.tracfone.com
    MMS port- 80
    MCC- 310
    MNC- 410
    Authentication type- Not set
    APN type- default,supl,mms

    New APN
    Name: Straight Talk
    Apn: tfdata
    MMSC: http://mms-tf.net
    Mms proxy : mms3.tracfone.com
    MMS PORT: 80
    MCC:310
    MNC:410
    APN TYPE: default,supl,mms



    SIM unlock threads
    - http://xdaforums.com/showthread.php?p=10456038

    - http://xdaforums.com/showthread.php?p=30541172

    If you don't have service after unlocking and switching SIM cards you need to flash an at&t modem like I777UCLL6 found above. Apparently the modem used by Straight Talk only works with their service.


    Being THROTTLED? read this-
    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    - I777 Main Thread-

    - Samsung Drivers-


    - BOOT INTO RECOVERY-
    Phone off- Hold volume up, volume down and power button until you reach Recovery menu.


    - DOWNLOAD MODE-
    Power off, Hold volume down button, Plug in USB connected to computer, Hit volume up when prompted


    - CWM ZIP FLASHING -
    - Save Zip file to be flashed to the Root (not in a folder) of your External SD card
    - BOOT INTO RECOVERY- Phone off
    - Hold volume up, volume down and power button. (You can release just the power button at the samsung screen but dont have to).
    - Select -install zip from sdcard, -choose zip from sdcard, -select the zip file you put there earlier, -it will ask you to confirm, select -yes -install
    - If you are installing a custom ROM Do this FIRST before installing Zip, -wipe data/factory reset, wipe cache partition, select -advanced, -wipe dalvik cache


    -Link to my CWM flashable Wipe Scripts-


    More to come.......

    THANKS
    None of this would be possible without
    - Entropy512
    - eclipsedarkmoon
    - r00t4rd3d
    - RenderBroken
    - and everyone else that has posted here, tested, questioned, etc...
    13
    Off-Topic:

    I just wanted to take a minute to congratulate mr-cook on becoming an XDA Recognized Contributor! :good: :good:

    This guy gives so much to the SII community and it is great to see him be recognized for his efforts.

    Congrats!

    /Off-Topic
    9
    The op needs to be updated with this'd information...

    The latest cwm is only for kitkat ROMs, that's cm 11+. Of you want to go with jelly bean ROMs like the one you're trying to use, you need to use cwm 6.0.2.7 it's older but JB won't flash on the newer ones. There are a few different versions but any will work as long add it's philZ, AJK, or 6.0.2.7

    Since you already have cwm installed you can just DL the zips and flash them in recovery then reboot "recovery" and it will be complete. No need for Odin now. Try that and get back to us

    I think I'm just going to replace CWM with the new TWRP in the op. It seems to be easy more compatible. Plus I like it better.

    EDIT: Done. Op updated to install TWRP with Odin to be more compatible.

    Sent from my SGH-S959G
    9
    since this post is in AT&T Samsung Galaxy S II SGH-I777 section...i thought it might be compatible. i even saw a lot of ROM posts where they says its compatible with i777 and sgh s959g....so i was in doubt and had to ask.....glad to know its not compatible...thx....







    I thought it was...a lot of the ROMs I search are based on the i777 builds just have to make sure you have the correct radio installed.....I've rooted mine and used several different ROMs just based off of this thread. Searching the thread with the search tool will yield massive results. See post#5 from the OP that's a fairly good clue.

    Ok ok ok wait... Let's clear up some confusion. The one and only difference between the 959g and the i777 is that the 959g has its recovery on a separate partition by itself, whereas the i777 has kernel and recovery on the same partition. The 959g can use any ROM or kernel built for the i777 no problem. But if you want a different recovery on 959g you must use one of the zips from the op or Odin. If you had an i777 and you flash a new kernel it will also install a new recovery as it will be packaged in the zip. If you flash the same kernel on the 959g, your kernel will change but recovery remains untouched since it is on a different partition. That is the one and only difference between the two. Happy flashing :thumbup::D