[ROM] [i9020/23] CyanogenMod 9 v4.0.4 v7.0 + CM Night builds

Search This thread

nixit

Member
Sep 8, 2006
18
4
Has anyone else noticed that USB mass storage isn't working in 505 nightly? I have gone to an earlier backup to see if it's working in 506.
 

S7icky

Senior Member
Jun 23, 2011
263
46
to be included in next nightly:
Replace Themes stub with the actual launch intent (android_packages_apps_Settings)
update-cm-9-20120506-NIGHTLY-crespo-signed.zip
update-cm-9-20120505-NIGHTLY-crespo-signed.zip
German: Updated Strings CrepsoParts (android_device_samsung_crespo)frameworks: Fix audio routing when plugged to docks (android_frameworks_base)Camera : Timer Snapshot (android_packages_apps_Camera)Mms / Emoji support: Fix for Unicode 6.1 emojis, Preference toggle fix, and Better dialog for insertion (android_packages_apps_Mms)CM9-Add Russian to the supported spellchecker languages (android_packages_inputmethods_LatinIME)Adjust statusbar PowerWidget indicator color to match ICS blue (android_frameworks_base)Camera: filter supported focus mode (android_packages_apps_Camera)DSPManager: WM8994 big cleanup (android_packages_apps_DSPManager)Busybox 1.20.0 squashed commit for ICS (android_external_busybox)Use #define value of 1 to indicate presence of headers. (android_system_core)ifdef fix for HAVE_SYS_UIO_H, not defined to '1' (android_external_strace)Update Ukrainian translation. (android_packages_apps_DSPManager)Implement additional keycodes (android_frameworks_base)Settings: Use Holo theme for ActivityPicker Dialog (android_packages_apps_Settings)Mms: Fix delete template warning message (android_packages_apps_Mms)Allow customization of SoftAp (android_frameworks_base)Ad-hoc network support (framework part) (android_frameworks_base)Use the Hotspot driver call from WIFI HAL (android_frameworks_base)wifi: Add AP specific API (android_hardware_libhardware_legacy)Settings: Fix font size mismatch in RingerVolumePreference (android_packages_apps_Settings)Settings: Fix font size in Profiles dialogs to match design (android_packages_apps_Settings)Framework: Slide lock delay support (Part 1 of 2) (android_frameworks_base)Settings: Slide lock delay settings (Part 2 of 2) (android_packages_apps_Settings)Update to strace v4.6. (android_external_strace)Settings: improve Spanish translation (android_packages_apps_Settings)Ad-hoc network support (settings part) (android_packages_apps_Settings)Danish translation (android_packages_apps_Torch)make flash indicator visible ref. 14418 (android_packages_apps_Camera)disable android adhoc lock, only check if we aren't in mismatch (android_external_wpa_supplicant_6)disable android adhoc lock, only check if we aren't in mismatch (android_external_wpa_supplicant)Change SIM Pin lock entry to center of window with transparent background for devices with large screens (Tablets) (android_frameworks_base)Remove useless accents from Hungarian keyboard & switch back to qwerty (android_packages_inputmethods_LatinIME)updated pt-PT (european Portuguese) translation. fixed blanks and minor language fix (android_packages_apps_Settings)Updated Ukrainian translation. (android_packages_apps_Settings)extend PreferenceActivity for title text on a single pane mode (android_frameworks_base)Merge upstream v1.4.13 (android_external_iptables)FLACExtractor: Don't check size of first STREAMINFO (android_frameworks_base)Mms: Add ? and ? special case to strip unicode. Needed in Croatian. (android_packages_apps_Mms)Japanese : update translation, Add new translated string entries. (android_packages_apps_Settings)Electron Beam Animation (2/2 Settings) (android_packages_apps_Settings)SurfaceFlinger: Invalidate HWC Geometry on buffer validity change (android_frameworks_base)Allow different lease time in tether start command (android_system_netd)Increase CMD_ARGS_MAX in FrameworkListener (android_system_core)Allow configuration of DHCP lease time in tethering (android_frameworks_base)Get rid of the un-Holo background drawable in the running app detail view (android_packages_apps_Settings)telephony: SamsungRIL cleanup (android_frameworks_base)
update-cm-9-20120504-NIGHTLY-crespo-signed.zip
libmedia: renamed cflag for samsungs isSeparatedStream() (android_frameworks_base)Added "Support for emojis" on the MMS app (android_packages_apps_Mms)
update-cm-9-20120503-NIGHTLY-crespo-signed.zip
french: mail check frequency (android_packages_apps_Email)Email hungarian translations (android_packages_apps_Email)Browser hungarian translations (android_packages_apps_Browser)Camera hungarian translations (android_packages_apps_Camera)
 

TigaTiger

Senior Member
Apr 13, 2012
370
44
Sydney
Did Deep Idle worked on your phone since v7.0, where it also didn't if I remember correctly?

If "Slice it" slows the phone down, then maybe it's the app's fault or is it working with other roms (would be the most interesting information about that "issue"). If not, then just don't use it (and please stop posting such unrelated information in this thread).

About battery saver and / or SetCPU-profiles: I don't use any of it. I just set the cpu speed in the performance options and that's all. I really don't see how "screen off" profiles could save many battery, at least if there are not many apps running in the background, preventing the phone to go to sleep / DI.

And the question about which browser to use is surely just a matter of personal preferences. Personally, I avoid using the stock browser because most of the security issues found concern the stock browser mostly, so using another browser could be safer. But if you choose Dolphin, Chrome, Firefox, Opera or anything else is just a question of which one you like most.

I can tick/turn on deep idle but its the settings I can't get into where it shows top on and top off.

People say that if you know how to use battery saver than its worth to use it. SetCPU overall works for me to save battery.

I haven't found any security issues so far. I'm going to stick to stock because I don't want unneeded apps that can slow down the phone.


Sent from my Nexus S using XDA
 

denimjunkie82

Senior Member
Jan 14, 2010
229
26
San Diego
Hey all,

I looked through the past 10 pages or so and couldn't find any info on this.

I'm using v4.0.4 v7.0 and I cannot find Google Wallet in the Play store.

I also tried manually flashing with this but Wallet just force closes. I'm not sure if it's outdated:
http://xdaforums.com/showthread.php?t=1311072

I've tried Trinity and Matrix kernels, which supposedly allow Wallet to run, but they also force close Wallet for me.

I came from a fresh install of CM9. Wiped everything and started from scratch, even formatted the SD partition.

Anyone have any ideas?

Thanks
 

kirby_blue

Member
Dec 25, 2010
26
2
Hi!

I just made the switch 'CM 7.0.2 + 007 Kernel' -> 'CM9 7.0 Default Kernel' (No overclock, ondemand governor, full wipe, clean install and so on)

So far I love it! But some stuff is bugging me a bit and I wonder if people have workarounds?
I know CM9 is still under heavy development but I just wonder if these are known issues or something?

  • Clock: When I loose cell network signal for a while, the clock gets way out of sync (clock is set to sync to network)
  • Camera: shutter button is now 'Power' instead of 'Volume'. What about when you want to quickly turn your screen ON/OFF to take pictures?
  • Screenlock PIN: if I choose that 'OK' needn't be pressed: "erase account if error". So if the screen turns on in my pocket, I'm dead?
  • Trebuchet: I preferred CM7 infinite scroll over the current side-scroll
  • Phone & contacts: it remembers the last screen it was on. I'd rather it didn't
  • Notification toggle widget: I miss the Flashlight
  • Wifi: The signal bar is gray at times (using JuiceDefender here), I think it's a known issue.
 

oliver2ooi

Senior Member
Jan 21, 2011
220
15
Paris
Hey all,

I looked through the past 10 pages or so and couldn't find any info on this.

I'm using v4.0.4 v7.0 and I cannot find Google Wallet in the Play store.

I also tried manually flashing with this but Wallet just force closes. I'm not sure if it's outdated:
http://xdaforums.com/showthread.php?t=1311072

I've tried Trinity and Matrix kernels, which supposedly allow Wallet to run, but they also force close Wallet for me.

I came from a fresh install of CM9. Wiped everything and started from scratch, even formatted the SD partition.

Anyone have any ideas?

Thanks

Don't just look, use the search this thread feature under the twitter, facebook and feed
 

madd0g

Senior Member
May 8, 2010
2,841
872
Hi!

I just made the switch 'CM 7.0.2 + 007 Kernel' -> 'CM9 7.0 Default Kernel' (No overclock, ondemand governor, full wipe, clean install and so on)

So far I love it! But some stuff is bugging me a bit and I wonder if people have workarounds?
I know CM9 is still under heavy development but I just wonder if these are known issues or something?

  • Clock: When I loose cell network signal for a while, the clock gets way out of sync (clock is set to sync to network)
  • Camera: shutter button is now 'Power' instead of 'Volume'. What about when you want to quickly turn your screen ON/OFF to take pictures?
  • Screenlock PIN: if I choose that 'OK' needn't be pressed: "erase account if error". So if the screen turns on in my pocket, I'm dead?
  • Trebuchet: I preferred CM7 infinite scroll over the current side-scroll
  • Phone & contacts: it remembers the last screen it was on. I'd rather it didn't
  • Notification toggle widget: I miss the Flashlight
  • Wifi: The signal bar is gray at times (using JuiceDefender here), I think it's a known issue.
- don't sync it to network
- power button is more natural since it's on top, when taking pics
- ...
- if you want other scroll type, download Nova or Apex launcher
- that's an ICS thing
- flashlight will be fixed eventually
- as you said, JD, Green power and similar apps turn off connection periodically. Signal bar is colored when you're connected to Gtalk/Google. So connect those 2 together and you'll get what's wrong.
 

kirby_blue

Member
Dec 25, 2010
26
2
- don't sync it to network
- power button is more natural since it's on top, when taking pics
- ...
- if you want other scroll type, download Nova or Apex launcher
- that's an ICS thing
- flashlight will be fixed eventually
- as you said, JD, Green power and similar apps turn off connection periodically. Signal bar is colored when you're connected to Gtalk/Google. So connect those 2 together and you'll get what's wrong.

Thanks for your quick answer!!

I just need to disagree with you on the camera power button:

You might be right for the more natural behavior but IMHO it's much less efficient if you often use your phone as a camera.

When you're taking pictures and you want to catch something really quickly, you should be able to lock/unlock your phone with a single button press. It unfortunately becomes impossible with this assignation whereas it works much better with volume keys because they serve no other purpose when you're in camera mode.

Anyway, will wait & see... ;)

Thanks.
 

ghling

Senior Member
Dec 31, 2011
262
73
I can tick/turn on deep idle but its the settings I can't get into where it shows top on and top off.

When I remember correctly, you had this problem in previous versions, right?
If so, was there a version of the rom after that where the stats were displayed (and not resulted in a forced close)? If not, it is possible that you still have the same problem / bug as in the previous version. Did you do a clean install?
 

madd0g

Senior Member
May 8, 2010
2,841
872
When you're taking pictures and you want to catch something really quickly, you should be able to lock/unlock your phone with a single button press.

In ICS, you have a swipe left to camera shortcut on the lockscreen. The thing is, that you can't please everyone with binding to existing buttons, the optimal solution would be a dedicated camera button on all Android devices, but that just doesn't happen (vendors "innovate" with stupid gestures to run the camera, like the SGS3).
 

kirby_blue

Member
Dec 25, 2010
26
2
In ICS, you have a swipe left to camera shortcut on the lockscreen. The thing is, that you can't please everyone with binding to existing buttons, the optimal solution would be a dedicated camera button on all Android devices, but that just doesn't happen (vendors "innovate" with stupid gestures to run the camera, like the SGS3).

Is there a way to enable it when you set a pin? (therefore bypassing the pin)
 

Top Liked Posts

  • There are no posts matching your filters.
  • 286
    CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.0 (ICS), which is designed to increase performance and reliability over stock Android for your device.
    Code:
    #include <std_disclaimer.h>
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     */

    CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

    Instructions:

    First time flashing CyanogenMod 9 to the Nexus S, or coming from another ROM?
    1. Root the device and install ClockworkMod Recovery. Instructions are available here.
    2. Perform a NANDroid backup of your current ROM.
    3. Format the system, data & cache partitions of your device.
    4. Perform a factory reset.
    5. Flash CyanogenMod.
    6. Optional: Install the Google Apps addon package.
    Upgrading from earlier version of CyanogenMod 9?
    1. Perform a NANDroid backup of your current ROM.
    2. Flash CyanogenMod (your Google Apps will be backed up & restored automatically).
    Issues?

    Experience issues? Please provide the following info:
    • If the device was hard reboot, please provide the file "/proc/last_kmsg".
    • If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
    • Please use Pastebin when possible.
    Download Links:

    CyanogenMod:
    Latest version: V7 patch 0 (from v6.x to v7.x should be no need to make a clean install)
    Download: link
    Download: link Mirror
    Download: No torrent already ( )
    Download: link mirror ( by korumera Thanks )
    MD5sum: bb2dc9139a90d5096afcb0aeefc9b48f
    Old Version: V6 patch 0
    Download: link

    REMEMBER TO INSTALL GAPPS ALWAYS AFTER INSTALL AND UPDATED ROM.
    For those who want to install faceunlock read this: https://plus.google.com/u/0/111722836277981844223/posts/2LthtkGD8aY

    TO MAKE A CLEAN INSTALL. LOOK HERE
    REPORT ISSUES ONLY IF:
    • You made a clean intall
    • You use the default kernel
    • You have not installed new framework
    • You have confirmed the issue is there with default CPU speed

    Take a look for those willing to restore bootanimation. That is the new bottanimation posted here ( sorry one of the users posted but not remember the nick "message me" ) and I added to recover for those who have selected no boot animation on previous versions: http://goo-inside.me/devs/kalimochoaz/Others/CM_Animation.zip flash it from recovery

    The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!​
    88
    CHANGELOG

    For those who preffer to continue on alfa 13, here is an update ( alfa 14 ) Alfa 14 can be installed over alfa 13 without clean

    NEW on alfa 14:
    • Notification LED issue solved.
    • Updated code
    • Updated T9
    • Voodoo color changes to v1

    NEW ON ALFA 15:
    • Kernel 3.0.8
    • LED notification is on
    • T9 in call patched from alfa 13
    • LED Keys not turning ON when screen is off and you touch the screen

    NEW ON ALFA 16:
    • Added voodoo color control
    • Updated code for some issues

    NEW ON ALFA 17:
    • Added voodoo sound control
    • Added MusicFx
    • Updated code for some issues
    • Superuser corrected, now works without issues
      [...]


    NEW ON ALFA 18:
    • Overclock kernel ( use setcpu )
    • Removed MusicFX since there is DSPManager
    • System updated. Advanced users can now use compcache
      [...]

    NEW ON ALFA 20:
    • Overclock kernel up to 1400 ( use setcpu )
    • Removed software egl for now until we find a reason on why is here.
    • Added DeepIDLE ( Thanks to Ezekeel ) also some other kernel changes.
    • Added Touch to focus on camera. Now if you touch the screen it will make a previous focus.
      [...]

    NEW ON ALFA 20.p1:
    • Readded Trebuchet

    NEW ON v1:
    • Code updated to CM
    • Review kernel code to make stable
    • Upgraded kernel to 3.0.17
    • No more flickering on turn on/off
    • Added all sound options to DSPManager. ( voodoo app is not compatible, use the options in device settings to control colors and options in dsp manager under wm8994 to control sound )
    • Added zram option.
    • Optimized for battery life and speed.

    NEW ON v1.1:
    • Default RGB gamma set to 0 ( choose the best gamma you want at device settings )


    NEW ON v2.0:
    • More kernel upgrades
    • code updated
    • Added some overclock patches for stability
    • New music app
    • Added New settings
    • Added new governor lulzactive. I suggest you to use this one for depending the use of your phone.
    • New Settings icons
    • No more flickering on turn on/off the screen
    • Modified kernel for kms
    • lulzactive as default governor with some tweaks.
    • Added setting to control kms ( settings/ performance / memory ) You will win memory on your devices
    • Default values for ksm set to reduce cpu usage
    • more system updates
    • New option to control lulzactive governor. Look on Settings/advanced
    • Reapaired error at multiplier colors
    • Cleaned the code at device options
    • Added Torch working app
    • Voodoo wm8994 DSP corrected into DSPManager to avoid sporadic FCs


    NEW ON v3.0:
    • Added Torch, now with widget ( widget for the screens, not for the drawer app )
    • Added option to camera to take photos by pressing power button
    • Updated Code to 20.02.2012
    • Added code to display %battery
    • Removed Lulzactive
    • Solved the caller app issue ( after some calls you received and FC on number pressing on old releases )
    • Updated kernel 3.0.21 & new kernel speeds
    • Changed various settings

    NEW ON v3.3:
    • Added new bootanimation
    • Added turn on with volume
    • Solved some DSP 8994 issues settings
    • Updated kernel 3.0.22
    • Changed various settings

    NEW ON v3.4:
    • Corrected bootanimation size

    NEW ON v4.0:
    • New kernel 3.0.25
    • Updated code to 22.03.2012

    NEW ON v5.0:
    • New kernel 3.0.27
    • Updated code to 05.04.2012
    • Kernel and code based on 4.0.4

    NEW ON v6.0:
    • Deep idle is now stable, at least on our tests.
    • Gamma hack is new, a new idea with great colors Check the CM preset button on gamma hack and on multipliers.
    • More battery time.
    • Code updated
    • ...

    NEW ON v7.0:
    • Deep idle is now tested and stable.
    • Ne preset screen with gama/multipliers combinations (thanks to ale.landra91 cpaixao and malycomix.
    • More battery time.
    • Freq issues solved on deepidle
    • Better 1.2GHz OC stability reached
    • ...
    36
    Q/A Post

    Q/A:

    I have an extrange green color at boot and when I have automatic brightness setted, what can I do:
    Go to crespo setting and change in gamma the values: ( by default values on google are 0,0,0 but I suggest you to explore the best you like) for me is:
    RED: 50
    GREEN: 46
    BLUE: 46

    How can I do to make a clean install?
    Read that post http://xdaforums.com/showpost.php?p=20485148&postcount=146

    I have 2 times gallery app repeated and is buggy:
    Install again gapps. This happens because you updated and no installed gapps after installing.

    I need to go root with adb, but it doesn't work:
    adb root
    After you can type "adb remount" or simply "adb shell" and you are root.

    How can I do to enable KSM?:
    Settings -> performance -> Memory Management -> Kernel Samepage merging ( KSM )
    25
    Instructions for fresh install

    In order to ensure your install is 100% fresh make sure you follow the following steps exactly:

    • Reboot into Recovery
    • Wipe data/factory reset
    • Wipe cache partition
    • Mounts and storage -> format /system
    • Then flash the Android ROM
    • Then flash Gapps
    22
    I flashed nightly 0520 and noticed there wasn't any Facebook sync/errors out. Anyone else notice that? Just curious.

    Also, kalim, where's 8.0?

    my computer is broken. I'm waiting for a new one in order to prepare a new release. I hope soon we will have that v8.

    Kalim