All jade questions & answers & some links

Search This thread

haree

Senior Member
Sep 13, 2008
4,021
720
CHENNAI
@blackaos regarding ur battery problem see this

hi
if u are using the V13 Pdaviet ROM and u are getting this battery problem then u are right as i faced the same problem
pls see below link as i have posted the same in the thread


http://xdaforums.com/showpost.php?p=4187833&postcount=112

Well my Jade has two problems right now, since I've updated his ROM, I think.

1. When it's charging (standby mode) it only charges to 50-60% and the light is always orange. But after a soft reset it appears immediatly 100% and the light turns to green.

2. While it's in standby mode it doesn't vibrate when receives a SMS, only blinks the green light.

So... Problems with standby mode? :rolleyes:
 

blackghost87

New member
Jul 21, 2009
1
0
hi.. been having problems with regards to flashing. hope someone can help..

i've installed Jade Hard_spl_V41.exe

i've been copying the customruu into ruu_signed.nbh files..

but i cant seem to flash it. always stuck at 0% den i have to do recovery.

would a kind soul assist me on this :D
 

DaveShaw

Senior Moderator Emeritus
Dec 4, 2007
8,772
522
Huddersfield
www.taeguk.co.uk
hi
No this not posible im not sure but i think TFL3d is harware related
dont know the exact tech reason but do know that it is not posible

Actually... It's possible Leo (L26) released a Kaiser ROM with Touch Flo 3D, not perfect, but working, before he went onto the Touch HD.
Chainfire and some others spent a lot of time trying to port it with some success. I don't know the details of the project, but I know that it's possible.

Dave
 

haree

Senior Member
Sep 13, 2008
4,021
720
CHENNAI
do this first @blackghost87

hi
if u have done HSPL successfully first chek ur spl no it should be 2.32.OliNex
after HSPL how to chek do this
1. power off the phone
2.hold down the volume button and power on the phone
u will get tricolor in this if the above no is shown than ur good to go
u can only see ur SPL no in the boot loader(tricolor screen) and not while phone is starting OK

and this statment of urs is wrong :
i've been copying the customruu into ruu_signed.nbh files.

u must do the opposite of the same ie put the ruu in the custome RUU
connect the phone via USB cable make sure that the active sync has happen and then click on the custome RUU and do what it says
goodluck:D



hi.. been having problems with regards to flashing. hope someone can help..

i've installed Jade Hard_spl_V41.exe

i've been copying the customruu into ruu_signed.nbh files..

but i cant seem to flash it. always stuck at 0% den i have to do recovery.

would a kind soul assist me on this :D
 

orange3g

Senior Member
Jul 12, 2009
73
0
"please make sure you already flashed stock ROM and radio, because stock SPL flash is *always* the last step before sending the device in."

What if you have accidentally failed to flash stock ROM and radio before stock SPL, how to fix situation?
 

haree

Senior Member
Sep 13, 2008
4,021
720
CHENNAI
as the Q here

hi
their is a thread for HSPL i think u would get a beter answer when u ask the same their pls see below link for ur info:D

but for ur info when u flash a stock ROM it also updates the Radio also
that's what happened for me when i tried flashing the stock rom 2.33 and 1.40 asia ROM in both the cases i saw that the radio also got changed so to my limited knowledge (im not a techi ) the radio will also get changed :D




http://xdaforums.com/showthread.php?t=483465


"please make sure you already flashed stock ROM and radio, because stock SPL flash is *always* the last step before sending the device in."

What if you have accidentally failed to flash stock ROM and radio before stock SPL, how to fix situation?
 

HOOBOO

Member
Jul 30, 2009
10
0
Hi,

I changed my SPL to SPL : 2.32.olinex
and then I am lost completely. I do not know how flash my HTC?

Help please???
 

yohainadav

Member
Aug 2, 2009
28
0
Freetown,Sierra Leone
Help please

I really don’t know what to do I’m lost, you, I tried to SPL with V41 and could not get it because “server down” error, I had three color screen with 1.40.1000 olinix, anyway I flush with IoJade65-1.1.wwe_2 , win 6.5 before I had 2.32 in the three color screen I tried to use the stockjaderuu_140 and now three color screen is 1.40.000 without olinix all the rest is the same as before jade 64,,,,, I can’t flush any rom or to HSLP with V4.1 or v3 the activsync disconnecting and I can’t stay with this win 6.5 it’s not working at all very slow and stuck what do I do help please pm me back thanks i jade 3G
 

haree

Senior Member
Sep 13, 2008
4,021
720
CHENNAI
@yohainadav

hi
i cant understand what u are saying explain in detail
1. did u do HSPL on doing so is ur spl no 2.32.olinix
if u have got the above SPL no then u have done HSPL
if u have not done HSPL then u cant flash any cooked ROM
the instruction in the HSPL thread is very clear u need to use the stock jade only to get back ur orignal spl ie it is clearly mentioned that it is the last thing to be done u need to flash an orignal ROM spl as per ur phone and then after flashing the ROM do u need to flash the stock jade 1.40 or 2.33 which is required for ur phone

now ur statement below is totally confusing :confused::confused::eek::confused:
give exact details and i will try to help u and dear u need to do a little bit of detail reading before trying the same
goodluck



I really don’t know what to do I’m lost, you, I tried to SPL with V41 and could not get it because “server down” error, I had three color screen with 1.40.1000 olinix, anyway I flush with IoJade65-1.1.wwe_2 , win 6.5 before I had 2.32 in the three color screen I tried to use the stockjaderuu_140 and now three color screen is 1.40.000 without olinix all the rest is the same as before jade 64,,,,, I can’t flush any rom or to HSLP with V4.1 or v3 the activsync disconnecting and I can’t stay with this win 6.5 it’s not working at all very slow and stuck what do I do help please pm me back thanks i jade 3G
 
Last edited:

yohainadav

Member
Aug 2, 2009
28
0
Freetown,Sierra Leone
hi
i cant understand what u are saying explain in detail
1. did u do HSPL on doing so is ur spl no 2.32.olinix
if u have got the above SPL no then u have done HSPL
if u have not done HSPL then u cant flash any cooked ROM
the instruction in the HSPL thread is very clear u need to use the stock jade only to get back ur orignal spl ie it is clearly mentioned that it is the last thing to be done u need to flash an orignal ROM spl as per ur phone and then after flashing the ROM do u need to flash the stock jade 1.40 or 2.33 which is required for ur phone

now ur statement below is totally confusing :confused::confused::eek::confused:
give exact details and i will try to help u and dear u need to do a little bit of detail reading before trying the same
goodluck
Dear haree
I’ll try to explain myself better, when I got the jade it was already with SPL 1.4.1000 olinix I just realize that the original ROM is Spanish or Italian I’m not sure, I have the box. The S/N is SH91GKHO2996 if it’s any good to you, ok now since the SPL was flushed already with olinix it allow the ROM win 6.5, to flush but it’s not working with it, the phone is dead ,and everything get stuck , that is when I flush with the stock SPL and got the 1.4.000 SPL , but still have the win 6.5 on with no ability to change it , now for some reason I couldn’t & cant HSLP with v4.1 or v3 , before the stock SPL it says “server is down or your computer is blocking try …….. . “ and I tried all it didn’t work , now it’s not showing any message just disconnecting Active sync , 1, do I need to go back to the original ROM for HSPL to work ? 2, if not, how do I HSPL if it keep disconnecting? :confused: hope you get me now :)

thanks have a nice day too
 

haree

Senior Member
Sep 13, 2008
4,021
720
CHENNAI
@yohainadav

hi
these are the mistakes u have done
1. flashing 6.5 on spl 1.4.olinix
2. big mistake u should not have flashed the jade spl 1.40
this is done after u have flashed the original HTC 1.40 Ram
ie it is done so u can get ur original spl if u need to take the phone for service for warranty purpose(sorry u have not read the thread properly or u would not have done this mistake)
What u need to do
1. down load the HSPL tool u get from the thread
2. connect ur phone to ur comp
3. you need to turn off ur Virus scan and firewall on ur comp
4. u need to have live internet connection use ur home connection not office connection
now run the hard SPL tool u need live internet connection while running it
it ask a question on ur phone press Yes
if the HSPL happens then u will get the new spl as 2.32.olinix
if u get this then u can Flash any ROM u want
now in not a techi and the way u have messed ur phone im not sure u can do the above but in wanting to help u i have given u the process

if none of the above happen u have to take it to service and solve ur problem
goodluck:D


Dear haree
I’ll try to explain myself better, when I got the jade it was already with SPL 1.4.1000 olinix I just realize that the original ROM is Spanish or Italian I’m not sure, I have the box. The S/N is SH91GKHO2996 if it’s any good to you, ok now since the SPL was flushed already with olinix it allow the ROM win 6.5, to flush but it’s not working with it, the phone is dead ,and everything get stuck , that is when I flush with the stock SPL and got the 1.4.000 SPL , but still have the win 6.5 on with no ability to change it , now for some reason I couldn’t & cant HSLP with v4.1 or v3 , before the stock SPL it says “server is down or your computer is blocking try …….. . “ and I tried all it didn’t work , now it’s not showing any message just disconnecting Active sync , 1, do I need to go back to the original ROM for HSPL to work ? 2, if not, how do I HSPL if it keep disconnecting? :confused: hope you get me now :)

thanks have a nice day too
 

yohainadav

Member
Aug 2, 2009
28
0
Freetown,Sierra Leone
hi
these are the mistakes u have done
1. flashing 6.5 on spl 1.4.olinix
2. big mistake u should not have flashed the jade spl 1.40
this is done after u have flashed the original HTC 1.40 Ram
ie it is done so u can get ur original spl if u need to take the phone for service for warranty purpose(sorry u have not read the thread properly or u would not have done this mistake)
What u need to do
1. down load the HSPL tool u get from the thread
2. connect ur phone to ur comp
3. you need to turn off ur Virus scan and firewall on ur comp
4. u need to have live internet connection use ur home connection not office connection
now run the hard SPL tool u need live internet connection while running it
it ask a question on ur phone press Yes
if the HSPL happens then u will get the new spl as 2.32.olinix
if u get this then u can Flash any ROM u want
now in not a techi and the way u have messed ur phone im not sure u can do the above but in wanting to help u i have given u the process

if none of the above happen u have to take it to service and solve ur problem
goodluck:D
I thought so I think the problem is probably my internet connection I’m using cellular modem (in West Africa) hope it will work eventually, I think all I need is to get the HSPL to flush to 2.32 thanks Haree
 

paperclip69

Senior Member
Apr 13, 2008
104
2
Crosshill, Fife
reflash original stock rom

Hi

I have my original orange rom and need to put it back on as i think i have a fault but need to check. I currently have 6.5 installed, I went to install my original rom that i backed up before i did any upgrading.

but after the rom installed (the first boot just after the progress bar) it hangs at the orange spalsh screen

do i need to change my hspl version? if so what version should i down grade too and what order should i do it in? i.e. flash original rom then down grade hspl to another olinex or do hspl first and then go to original orange spl after rom is installed etc.

cheers

Tom
 

haree

Senior Member
Sep 13, 2008
4,021
720
CHENNAI
@paperclip69 see here

hi
see below link pls pls read before u get into any problem their is a specific procedure to re flash orignal rom and then to get the original spl bak
see below link and also read instruction in the HSPL thread
goodluck:D


http://xdaforums.com/showpost.php?p=4263746&postcount=33


Hi

I have my original orange rom and need to put it back on as i think i have a fault but need to check. I currently have 6.5 installed, I went to install my original rom that i backed up before i did any upgrading.

but after the rom installed (the first boot just after the progress bar) it hangs at the orange spalsh screen

do i need to change my hspl version? if so what version should i down grade too and what order should i do it in? i.e. flash original rom then down grade hspl to another olinex or do hspl first and then go to original orange spl after rom is installed etc.

cheers

Tom
 

m0o

Member
Jan 29, 2009
19
1
help

Hi, when i press down button on the volume and power on to get into boot mode but it's just a white screen written "USB Update Mode!". How can i flash the rom? i tried the ship rom, when i wanna click next to load it, my htc will automatically off the lcd then my sync is disconnected. how can i solve this problem?
 

jackybin

New member
Sep 4, 2009
1
0
Shanghai
my T3232 cannot be unlocked

below is my device information, and when I use V5.2, it shows fatal error(non commericial purposes only), but this is my first device, so could you help to figure it out, your quick reponse will be highly appreciated!

JADE100 64M
SPL-2.31.0000
MicroP-Jade(LED)V5
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    some useful links for NOOBS

    hi
    some useful links for those who dont wana look around :D

    1. Jade HSPL - this tool helps u to Flash any cooked ROMs
    read this : http://xdaforums.com/showthread.php?t=483465
    read this also for jade 110 : http://xdaforums.com/showpost.php?p=4060869&postcount=45

    2.Rom Link Base - has most of the Orignal HTC Roms
    see here : http://xdaforums.com/showthread.php?t=483681

    3. Custome RUU - u need this to flash roms on to ur phone
    read this : http://xdaforums.com/showthread.php?t=441865

    4.Jade Flashing for NOOBS
    read this : http://xdaforums.com/showthread.php?t=514406

    5. some useful applications for Jade
    see here : http://xdaforums.com/showthread.php?t=476493

    6. SIM UN LOCKER FOR JADE : BY OLIPRO
    link : http://xdaforums.com/showthread.php?t=555354

    7. A FEW COOKED ROMS

    A. Tommy34 cooked ROM
    link 1 : http://xdaforums.com/showthread.php?t=524577
    Link 2 : http://xdaforums.com/showthread.php?t=505267
    Link 3 : http://xdaforums.com/showthread.php?t=525725
    Link 4 :http://xdaforums.com/showthread.php?t=550553 - His most recent Megade ROMS



    B. Ironeagle Lean Cut Roms
    Link 1 : http://xdaforums.com/showthread.php?t=524102
    Link 2 : http://xdaforums.com/showthread.php?t=510201

    C. SpaceJam Roms : Italian & English
    Link : http://xdaforums.com/showthread.php?t=554874

    D. SELKKMAN ROMS-German & English
    Link : http://xdaforums.com/showthread.php?t=576641

    E.kaew1995 WWE ROM
    Link : http://xdaforums.com/showthread.php?t=577350

    8.HOW TO CHEK UR SPL NO
    HI IF U WANT TO CHEK UR SPL NO WHICH IS SHOWN IN THE TRICOLOR DO THE BELOW

    1POWER OFF UR PHONE
    2.HOLD DOWN THE VOLUME DOWN BUTTON
    3.WHILE STILL HOLDING THE ABOVE POWER ON UR PHONE
    4. U WILL GET A TRICOLOR SCREE WITH UR SPL NO
    5.TO RE BOOT IN REGULAR MANNER USE UR STYLUS AND SOFT RESET UR PHONE


    9. HOW TO HARDRESET THE JADE(HTC TOUCH 3G)THIS IS HOW I DO IT AND IT WORKS
    1.Power off the Phone
    2.Press volume down button and also Press down the black center button
    3. while continuing do the above Power on the phone
    4. Now u will get a while screen asking u to press the volume up button
    to do the hard rest press the same its done
    Note : when u do Hard rest u will lose all your data so kindly take backup before doing the above

    10.HOW TO FLASH ROM ON JADE FROM THE SD CARD (THANKS kurtfhouse FOR THIS INFO)

    1. Rename the .nbh file of your rom of choice to JADEIMG.nbh, drop into the root of your SD card.
    2.Poweroff your phone
    3.hold the volume down key and while continuing to hold it power on ur phone
    4. The Phone will go into the bootloader mode, and will auto detect the rom image from the SD Card and ask if you want to proceed by hitting the power button. Hit the power button and the rom will install
    Note : it should take about 10-15 mins (as of now i have not tried this try at ur own risk but it works for kurtfhouse )
    also make sure that ur SD card is Fat32 or format the same to Fat32 & use a smaller memory card the smaller the better
    this is as per my experience using the above method on my previous phone ie gene(P3400i)

    Original link go here if u want feedback on the same : http://xdaforums.com/showthread.php?t=575045
    1
    BEFORE U PUT UR QUESTIONS HERE LOOK AT POST #2 I HAVE GIVEN SOME USEFUL LINKS CHEK IF UR ANSWERS ARE THEIR GOOD LUCK

    Hi all

    i have seen that many people are opening thread just to get answers for their specific problem they have!!!(no offense to anyone in particular) and i would like to inform to u that even though this forum is free

    some one is paying for all the space we are using (space as in hdd space storage space etc...)

    so lets not was threads to jut get an answer to our specific question

    my humble request is before u open a thread ask ur self

    1.can i get an answer to this by posting it in another thread related to this 2.is this thread useful to the others :confused:

    more often than not your answer to the 2nd question is NO

    I request all jade users put any questions u have regarding jade ie which cant be answered in a specific thread here so what does this do this saves space to create more useful threads for us all to use & also remember this could also become as a repository for all questions and answers on jade that the future jade users have and want answers for

    And yes if u start putting ur questions here you would start getting answers cause their are many many helpful members out their who like and enjoy helping others :D and once they start seeing this section they would keep coming just here to help us out
    1
    u can try this one

    hi
    i have Provided a Pdaviet ROM i like it and u can also see that many who have use it also like it this is ony provided by me OK
    :D

    Yes it is confirmed! that you need the internet connection in order to complete it.
    Guess proxy is not working for the SPL.
    Thanks bro.
    But as to date which ROM is the best i tested IOD and lean cut both of them not working properly (for 6.5)
    1
    I tried to download the following file Jade-HardSPL_V5_20R3_232HSPL.zip
    but my Anti-Virus detected it as a Hueristic Virus & blocked it.

    I want to update my HTC Touch 3G with the latest WM 6.5 but I'm finding it too complicated.

    I would really appreciate a step by step dummy guide.
    1- what sort of softwar do I need to have on my PC??
    2- What is the diffrence between a ROM & this HSPL or SPL??
    3- What are the latest ROM's & HSPL's versions??
    4- What is the latest step by step guide to follow?

    BR,

    hi
    the virus detection is false so dont worry just turn off ur virus scan and do the HSPL U need to do this if u want to flash any rom or cooked roms
    1. no specific sw req just os and regular pc SW
    2. ROM is what u flash on ur PC or like os for our phone
    SPL are the numbers u would get when u see the try color
    HSPL u need to do to flash any rom u want :D
    see the 2nd page of this thread or this : http://xdaforums.com/showthread.php?t=843638

    all info u need is their u need to read and do all the req things u will get help yes but no spoon feeding u need to read and ask ur questions and u will get help

    goodluck :D