HTC Touch HD NANDROID Thread
- NAND Tutorial
!! Important !!
Guys i now jack-all at the moment for the Touch HD NAND Process, So dont even contemplate the idea of asking me !! Go to Tida8s forum, and ask there !
Although i already know YOU Will, But for those who have forgotten !!
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Change Log
- 7-7-2011 Vir Twitter
Hi, guys News on blackstone nand. Maybe Sunday I will have the new files for the testing team.
- 1-07-2011
- 23-6-2011 Vir Twitter
Just give it the final touch. So it's official NAND BLACKSTONE 7/1 GET READY GUYS. THANKS GUYS
- 13-06-2011 07:36 AM.
-i will be using froyo x ginger w/o gapps (READY)
-building nbh (ready)
-working with the recovery.img (now)
- 14-6-2011 05:11 AM
UPDATE
ok guys. maybe friday i will be uploading FROYO X GINGER NAND FOR BLACKSTONE
just take a look inside the build update. and let me know if everything is good or if we need to add anything. thanks guys. eta: friday. build only
- 12-6-2011 Vir Twitter
(build) FROYO BLUE CWM 2011.06.12. blackstone. ready.
Youtube NAND v2 on Tida8's Touch Pro 2
- 10-06-2011 11:15 PM
update nand build. OK GUYS, GREAT NEWS. WE HAVE DATA WORKING. OH MAN THIS IS GETTING GOOD NOW. SO WE HAVE WIFI AND DATA WORKING.
- 10-06-2011 04:56 PM
update on blackstone nand
1-froyo x ginger blackstone nand is ready (rom)
2-building the blackstone.NBH now
thanks
- 08-06-2011 04:56 PM
Update on blackstone nand
Ok guys, I just went online to track my phone it will be here tomorrow.
1- I already have froyo x ginger ready with w/o gapps. That's the build that I will be using
2- need you guys to relax. This take time.
3- please don't ask for eta. It will be done when is done.
3- I will keep you guys updated on the proccess.
4- remember thanks to the A TEAM we have nand. It just a matter of time till our devices can have it. But we need people for this to happen
5- eventually I will get more devices, cuz the the only way to start nand testing is to have those the devices
6- my goal is see every device with nand. And to tell you guys the truth I can't do it by myself. Yes it will take time
7- I'm going to talk with tracker to see if we can have an IRC for . maybe
Also remember guys. I have a family outside android. 2 kids and a wife plus a job and a house. I'm always super busy
It's official nand testing for blackstone it' here guys
Sent from my CDMA BLAZN 2.2.2 NAND VERSION using Tapatalk
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
- NAND Tutorial
Page 1 By Tida8
setup you sdcard. format your card to fat32 and add this 3 updates
-froyo blue blackstone nand build
- kernel update
-root update
1-first we need to get android sdk set up for you devices.
http://dl.google.com/android/installer_r11-windows.exe (this the exe files) (Recommended)
http://dl.google.com/android/android...11-windows.zip (this the zip)
2- create 2 folder on you C: driver
- RUU (already has the ruu_signed.NBH AND task29)
- ADB (already has the recovery.img)
-download BlackstoneAdvancedRUU and unzip folder.
http://www.multiupload.com/RLJEC2GRCH
for more info on this ruu http://xdaforums.com/showthread.php?t=943851
-download adb and unzip it in your adb folder http://www.multiupload.com/NEEPYUDO6T
3- set up path for your adb and fastboot
right click my computer on your desktop pc. advanced system settings. environment variables. then system variables and double click on path. add this line at the end. just like that
;C:\adb
click ok everything
4- test adb
-boot any build (blue, ginger, frx06. etc....)
-download PdaNet http://www.multiupload.com/OVJ9V01M4F now install pdanet and follow the screen. pdanet will ask to connect your phone. let it finish. when done disconnect usb.
-on your android build go to settings/applications/development/ and check ubs debugging, stay awake, and allow mock locations. now connect you usb
-on your pc. start, run, type cmd, and type adb devices and enter
- you should see your device. you may see this 00000000000 device. that's ok that's your device ID
- great adb is working
5- set up fastboot (the set up for fastboot is done when you flash RHODIMG.nbh)
-when you see the blue screen with usb connected fastboot driver will install. that all
6- [TUT][HSPL] Hard-SPL Unlocker for Blackstone
http://xdaforums.com/showthread.php?t=431217
7- task29 set up ( this will erase windows mobiles) this tool is very important to flash nand or if you want windows mobile back on your phone
-turn off your phone. press vol down and power. you will see the (tricolour screen!). connect your phone usb. it may install drivers so wait till finish.
-open RUU folder on your c: driver pc
-right click on BlackstoneAdvancedRUU.exe and choose run as administrator and follow the screen. then the phone will reboot. but it wont pass the htc boot screen, just take the battery out.
8- flashing LK bootloader ruu_signed.NBH
- turn off your phone. press vol down and power. you will see the (tricolour screen!). connect your phone usb. it may install drivers so wait till finish
- open RUU folder. right click on BlackstoneAdvancedRUU and choose run as administrator. follow the screen. then the phone will reboot. you should see the blue screen. it may install drivers so wait, when finish you will see fastboot mode at the bottom in small letters. if nothing happen just pull the battery. read guide 9 recovery.img
9- how to flash recovery.img
-put battery back and connect your phone usb
-click on power. you will see blue screen look for fastboot mode at the bottom.
-on your pc. go to run type cmd and type this command to get to adb folder on your c: drive
cd C:\adb
then type
fastboot flash recovery recovery.img
wait till it finished. then to get to recovery mode type
fastboot boot recovery.img
the end key is (enter) vol down and up is to move. install updates in this order
-froyo blue build update
-kernel update
-root update
10- when done reboot. take the usb cable out. and welcome to nand
good luck and god bless you all
GUYS, ANYTHING ELSE THAT YOU GUYS WANT ME TO ADD PLEASE LET ME KNOW
i'm still updating this page-----------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Page 2 by explicit
NOOB guide for blackstone nand BY explicit
IMPORTANT!!! If you don't have HARD SPL installed on your phone do not continue.You must have HARD SPL for Blackstone installed on your phone
More about HARD SPL in step 6.
Format your micro SD card to fat32.
Add this 3 files from NAND BLACKSTONE FULL PACKAGE
-update-blackstone-nand.zip
- kernel update.zip
-root update.zip
1. Download the android-sdk for your system and install everything on it. Android-sdk depends on Java SE Development Kit (JDK), so if you
don't have java Development Kit installed dovnload it and install it before installing android-sdk. Even after installing On x64 OS you still may get
Java not found during the installation of android-sdk.In that case click Back and than again Next. It should find it now.
Java Development Kit download: http://www.oracle.com/technetwork/ja...ads/index.html
Android-sdk download.Choose installer_r11-windows.exe (Recomended) http://developer.android.com/sdk/index.html
2. Create 2 folders on your C:\ drive
- ruu ( Here we need to have BlackstoneAdvancedRUU from the link below and ruu_signed.nbh from BLACKSTONE NAND FULL PACKAGE)
- adb ( here we need all files from the adb link below)
-download BlackstoneAdvancedRUU and unzip it un the ruu folder from above.
BlackstoneAdvancedRUU http://www.multiupload.com/RLJEC2GRCH
for more info on this ruu http://xdaforums.com/showthread.php?t=943851
-download adb and unzip it. Copy all the files from the extracted archive in the adb folder above.
The path to adb.exe should be like this C:\adb\adb.exe
adb http://www.multiupload.com/NEEPYUDO6T
3. Set up path for your adb and fastboot
right click my computer and select properties. Now go to advanced system settings. Under the Advanced tab at the bottom select Environment Variables.
Under System variables find the line "path" For the Variable name stays path and for the Variable value at the end add this ;C:\adb
Close all windows with clicking OK.
4. test adb
-boot any build (blue, ginger, frx06. etc....)
-download PdaNet http://www.multiupload.com/OVJ9V01M4F now install pdanet and follow the screen. pdanet will ask to connect your phone. let it finish. when done disconnect usb.
-on your android build go to settings/applications/development/ and check ubs debugging, stay awake, and allow mock locations. now connect you usb
-on your pc. start, run, type cmd, and type adb devices and enter
- you should see your device. you may see this 00000000000 device. that's ok that's your device ID
- great adb is working
5. Set up fastboot (the set up for fastboot is done when you flash ruu_signed.nbh from NAND BLACKSTONE FULL PACKAGE)
-when you see the blue screen with usb connected fastboot driver will install. that all
6- [TUT][HSPL] Hard-SPL Unlocker for Blackstone
http://xdaforums.com/showthread.php?t=431217
7. Task29 set up ( this will erase windows mobile from your phone) this tool is very important to flash nand or if you want windows mobile back on your phone
-turn off your phone. press and hold Volume down and power on your phone. you will see the (tricolour screen!). connect your phone to usb. it may install drivers so wait till finish.
-open RUU folder on your c: drive
-right click on BlackstoneAdvancedRUU.exe and choose run as administrator, select "Perform Task 29 only" and follow the screen. then the phone will reboot,
but it wont pass the htc boot screen, just take the battery out.
8. Flashing LK bootloader ruu_signed.NBH
- turn off your phone. press and hold Volume down and power on your phone. you will see the (tricolour screen!). connect your phone via usb. it may install drivers so wait till finish
- open RUU folder. right click on BlackstoneAdvancedRUU and choose run as administrator. Select Custom RUU (Task 32) and follow the screen. then the phone will reboot. you should see the blue screen.
it may install drivers so wait, when finish you will see fastboot mode at the bottom in small letters. if nothing happen just pull the battery. read guide 9 recovery.img
9. How to flash recovery.img
-put battery back and connect your phone via usb
-click on power. you will see blue screen look for fastboot mode at the bottom.
-on your pc. go to run type cmd and type this command to get to adb folder on your c: drive
cd C:\adb
then type
fastboot flash recovery recovery.img
wait till it finished. then to get to recovery mode type
fastboot boot recovery.img
the end key is (enter) vol down and up is to move. install updates in this order
-froyo blue build update
-kernel update
-root update
10- when done reboot.
Read more:
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
!! Important !!
Guys i now jack-all at the moment for the Touch HD NAND Process, So dont even contemplate the idea of asking me !! Go to Tida8s forum, and ask there !
Although i already know YOU Will, But for those who have forgotten !!
Last edited by a moderator: