fire 2 will not boot stuck in boot screen

Search This thread

dyson77

Member
Nov 27, 2012
44
0
my kindle fire 2 is stuck in the blue whit fire-fire screen
I can access the twrp recovery but after a incorrect wipe i have no android or so i am assuming.
i have installed the Google usb drivers through adb but the tablet will not show up i explorer
it will show as a android device but will not load anything else.
i have also booted into the twrp and attempted to mount it and it didn't work

lastly i have tried to use a fastboot cable. i get a screen on the device that says fastboot and what looks like a stoplight with the green blinking but again will not show up in explorer
 

kidicarus1602

Senior Member
Oct 8, 2011
69
10
my kindle fire 2 is stuck in the blue whit fire-fire screen
I can access the twrp recovery but after a incorrect wipe i have no android or so i am assuming.
i have installed the Google usb drivers through adb but the tablet will not show up i explorer
it will show as a android device but will not load anything else.
i have also booted into the twrp and attempted to mount it and it didn't work

lastly i have tried to use a fastboot cable. i get a screen on the device that says fastboot and what looks like a stoplight with the green blinking but again will not show up in explorer

First check you have fastboot drivers installed correctly:

Plug the cable into your device and then the computer. Reboot the Kindle. It *SHOULD* show a Fastboot screen. Once at the screen use this command on your computer:
fastboot -i 0x1949 devices
You should see something like this:
0123456789ABCDEF

Then enter these commands one at a time

fastboot -i 0x1949 flash bootloader otter2-u-boot-prod-10.2.4.bin
fastboot -i 0x1949 flash boot otter2-freedom-boot-10.4.6.img
fastboot -i 0x1949 flash recovery otter2-twrp-2.6.3.0-recovery.img
fastboot -i 0x1949 reboot
 

dyson77

Member
Nov 27, 2012
44
0
1111.PNG

2222.PNG

33333.PNG

this is what device manager says
 

dyson77

Member
Nov 27, 2012
44
0
ok I have manually installed the drivers.
it then was showing up as a Otter-2
I then went through the same steps to add the drivers for it as a google usb driver.
but its still not showing up in my explorer and when i do a adb devices it doesn't show up
mind you that was all with the fastboot cable

when I hook it up with a standard usb and gho into the teamwin twrp it shows as a Kindle fire 2
and adb devices finds it as 0123456789abcdef

see attached pics
 

Attachments

  • Capture.PNG
    Capture.PNG
    27.2 KB · Views: 34
  • Capture3333.PNG
    Capture3333.PNG
    73.6 KB · Views: 36
  • Capture6666.PNG
    Capture6666.PNG
    73.8 KB · Views: 31
  • Capture444.PNG
    Capture444.PNG
    84.4 KB · Views: 29
  • Capture3345.PNG
    Capture3345.PNG
    38 KB · Views: 27
  • Capture4432452.PNG
    Capture4432452.PNG
    102.4 KB · Views: 36
Last edited:

dyson77

Member
Nov 27, 2012
44
0
Ok I have been able to push a file to the fire 2 but the only file that will install is cm-10.1.3-otter2.zip
when i try to install anything else i get a error 7 and then it wont boot at all when i reboot it just goes into a loop.
would like to put cm 11 on there seems a little better
 
Last edited: