Please read the following terms and conditions carefully before accessing or using the ROM upgrade(s). They apply to the ROM upgrade 'CR192 Mozart' and any ROM upgrades developed and provided by CRACING.
BY ACCEPTING DELIVERY OF THE ROM UPGRADE(S), YOU (HEREINAFTER “USER” OR “YOU”) ARE AGREEING TO BE BOUND BY THE FOLLOWING TERMS AND CONDITIONS. CRACING IS WILLING TO PROVIDE THE ROM UPGRADE(S) AVAILABLE TO YOU ONLY UPON THE CONDITION THAT YOU ACCEPT THE FOLLOWING TERMS AND CONDITIONS. IF YOU DO NOT ACCEPT THEM, DO NOT USE THE ROM UPGRADE(S).
You agree to use the ROM upgrade(s) for personal use only and will not engage or attempt to engage in any commercial or improper uses including:
- Violating the terms and conditions of the ROM upgrade(s);
- Copying, disassemble, reverse engineer, reproducing, distributing or publishing any part or the whole of the ROM upgrade(s) without CRACING consents;
- Causing damage directly or indirectly to CRACING or its supporters (including developers, friends, donors, users and etc.), XDA-Developers or its members (including admins, modulators, senior and junior members and etc.) or any others related the ROM upgrade(s);
IN NO EVENT SHALL CRACING OR ITS SUPPORTERS (INCLUDING DEVELOPERS, FRIENDS, DONORS, USERS AND ETC.), XDA-DEVELOPERS OR ITS MEMBERS (INCLUDING ADMINS, MODULATORS, SENIOR AND JUNIOR MEMBERS AND ETC.) OR ANY OTHERS RELATED TO THE ROM UPGRADE(S) BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR ANY DAMAGES OF ANY KIND (INCLUDING LOSS OF USE, PRODUCT, DATA, PROFITS, OR THE LIKE; OR BUSINESS INTERRUPTION) OR ARISING FROM OUT OF OR IN CONNECTION WITH THE ROM UPGRADE(S) OR THIRD-PARTY SOFTWARES.
Third-party softwares included in the ROM upgrades is subject to separate terms and conditions included with, or contained in such Third-party software.
Click
here for XDA-Developers terms and conditions
• This ROM upgrade is only designed for HTC Topaz aka HTC T535x, HTC Touch Diamond2, HTC Pure, O2 XDA Diamond 2, T-Mobile MDA Compact V, and AT&T Pure.
• DON'T ATTEMPT TO USE OR FLASH TO THE DEVICE(S) OTHER THEN MENTIONED ABOVE.
• Please check out XDA-Developers wiki for more info about HTC Topaz. Click
here
• By flashing this ROM upgrade, your Topaz may not extended or void warranty, so it’s your own risk and responsibilities.
• RUU supports all Windows platforms.
• Before you flash, make sure your Topaz is CID unlocked aka HardSPL. Click
here for more info.
• Before you flash, make sure your Topaz has at least 50% battery power.
• Before you flash, make sure you have taken backup of all your important data(s) on your Topaz including contacts, tasks, messages, emails and etc.
• Before you flash, make sure you have disabled screen saver, power saving and the like on your PC.
• Before you flash, make sure your PC has battery backup provided for safety propose. At least for 15 mins.
• Before you flash, close all the running softwares on your PC. Soft reboot the PC is recommended before flashing.
• While flashing, DO NOT start another process.
• While flashing, DO NOT minimize the RUU window. Let it stay in the foreground.
• While flashing, DO NOT interact or use your Topaz, unless instructed to do so.
• While flashing, DO NOT remove the USB sync cable from PDA, unless instructed to do so.
• First boot UC and XDA_UC_NET is already supported in all the ROM upgrades. Please check next page more info.
• After flashing and booting successfully, make a soft reboot. Hard reboot is recommended.
• On the first boot, start menu may take some time to open. Please give it some time before to start using your Topaz. It should be fine on 2nd boot and so on.
• This ROM upgrade doesn’t include radio aka GSM, IPL, SPL or etc. except OS and splash screen.
Please visit
this and
this thread for more detailed info about flashing ROM into T-Mobile HD2 aka LEO 1024.
The ROM consists of two UC options. One is automated installation on first boot after flashing which works from file called "SDConfig.txt" in the root directory of your storage card. Click
here for more info. Second is XDA_UC_NET which works by running the app manually. Quick Start guide about XDA_UC_NET :
1. Create following folders on your storage card
• XDA_UC
• XDA_UC\Manual
• XDA_UC\Copy2Root
• XDA_UC\Run
• XDA_UC\Execute
“XDA_UC” is a place for all .cab, .reg, .mscr, .cer files that should be automatically installed to device.
“Manual” is a place for all cab files you want install in usual "visible" mode with all questions.
“Copy2Root” is a place for all files and folders that should be automatically copied to device.
“Run” is a place for you self-extracting archives.
“Execute” is a place for you self-extracting archives if you want to continue customization while them working.
2. Run XDA_UC_NET and press customize button*.
*Make sure XDA_UC in Storage Card is selected as XDA_UC folder before you run the customizations.
Click
here for more details about XDA_UC_NET.