[ROM][P75xx][JB][4.2.2] CyanogenMod 10.1 Nightly Discussions

Search This thread

alexkno

Senior Member
Apr 12, 2011
1,103
287
No, only needed to set root to apps and adb in developer settings. Also wiped system prior to flash to get rid of old gapps stuff

Gesendet von meinem GT-P7510 mit Tapatalk 4
 
  • Like
Reactions: SahilC

arizal

Senior Member
Jun 3, 2007
57
2
Hello, lagfix/fstrim apps are not working with this rom. Is it the kernel and can I put another kernel on this rom. Im on the latest nightly - aug 10.

The error is:

fstrim: FSTRIM: Operation not supported on transport endpoint.

Question is, is this hardware or soft problem?

Thanks in advance.


Sent from my GT-P7500 using XDA Premium HD app
 
Last edited:
  • Like
Reactions: mahowi

SahilC

Senior Member
Jun 14, 2012
2,023
873
Amherst
Would this ROM become obsolete due to the newer 4.3 version? AAcount's?

Sent from my Galaxy Nexus using Tapatalk 4
 

MichaelMcC

Senior Member
Sep 11, 2011
370
45
P4VZW folks on CM10.1 (recent) or CM10 (07/25),
any issues with LTE?

I am not having LTE 4G problems but I was having WiFi problems with 7-30 now and then. An airplane toggle would clear it up. Could have just been me. I just pulled 8-11 so I will pay attention but 4G has not been a problem and this is our hot spot when mobile.

Sent from my Galaxy Nexus using xda premium
 

MichaelMcC

Senior Member
Sep 11, 2011
370
45
I tiried 4.3, looking good, but (for me) 4.2.2 curently runs more smoothly

I've seen guys asking about 4.3 on the Tab but like you, I don't really care about it. I am running 4.3 on my Nexus phone and the differences are so slight that most people would not dig deep enough to find them, so changes will go un-noticed. I will have to say that if you are running 4.3 you can pull App Ops Starter from the play store and be able to configure the majority of the permissions easily on a per app basis. Great for those concerned about privacy, and everybody should be. Otherwise the Tab runs so smooth with 4.2.2 it's nt worth updating. Just my 2 cents.
 

alexkno

Senior Member
Apr 12, 2011
1,103
287
I've seen guys asking about 4.3 on the Tab but like you, I don't really care about it. I am running 4.3 on my Nexus phone and the differences are so slight that most people would not dig deep enough to find them, so changes will go un-noticed. I will have to say that if you are running 4.3 you can pull App Ops Starter from the play store and be able to configure the majority of the permissions easily on a per app basis. Great for those concerned about privacy, and everybody should be. Otherwise the Tab runs so smooth with 4.2.2 it's nt worth updating. Just my 2 cents.

My experience is a bit different. E.g. HD video playback didn't work smooth for me on 4.2.2 but does on 4.3 also the code cleanup google did on 4.3. compared to 4.2.2 leads (at least on my side...but could be related to wiping etc) to a smoother performance
 

quorn23

Senior Member
Jan 25, 2012
464
182
Google Pixel 4 XL
Google Pixel 7
I backup titanium backup to a zip file and also the installed ups (create update.zip from it) both are failing when i try to flash them with cwm.
Anyone has the same issue? Or is this only my tab....:confused:

Anyone care to try it out?
 

alexkno

Senior Member
Apr 12, 2011
1,103
287
I backup titanium backup to a zip file and also the installed ups (create update.zip from it) both are failing when i try to flash them with cwm.
Anyone has the same issue? Or is this only my tab....:confused:

Anyone care to try it out?

and what error do you get? did you check whether the mount points and paths in the updater script are correct?
 
  • Like
Reactions: quorn23

eushaun99

Senior Member
Feb 8, 2013
2,014
970
25
Subang Jaya
I backup titanium backup to a zip file and also the installed ups (create update.zip from it) both are failing when i try to flash them with cwm.
Anyone has the same issue? Or is this only my tab....:confused:

Anyone care to try it out?

Is it status 0 error in cwm? That is normal for galaxy tab 10.1 as the update-binary is not compatible. Just take an update-binary from any ROM zip and replace it in the update.zip.

Sent from my GT-P7500 using Tapatalk HD
 
  • Like
Reactions: quorn23

decatf

Senior Member
Dec 27, 2011
649
2,675
Don't forget that the CyanogenMod 10.2 builds by AAcount are not official CM builds and he uses his heavily modded kernel. A point which the details are conveniently left out in the posts.
 

kasper_h

Inactive Recognized Developer
Oct 8, 2010
5,308
16,087
Xiaomi Mi Mix 2S
Samsung Galaxy A52 4G
Don't forget that the CyanogenMod 10.2 builds by AAcount are not official CM builds and he uses his heavily modded kernel. A point which the details are conveniently left out in the posts.

Conveniently left out? I think he is very clear on the fact that he ships the ROM with his kernel. And his kernel is indded modded, just like stock CM kernel is also not a clean Samsung kernel. That's how it goes....
 

alexkno

Senior Member
Apr 12, 2011
1,103
287
Don't forget that the CyanogenMod 10.2 builds by AAcount are not official CM builds and he uses his heavily modded kernel. A point which the details are conveniently left out in the posts.

This is the cm10.1 thread so I guess we can assume he is on cm.10.1 from get.cm with its shippewd kernel and the recovery advised in op but not on the 10.2 test build by Aacount

Tapatalked from my Nexus7
 

decatf

Senior Member
Dec 27, 2011
649
2,675
He mentions his kernel but chooses to post some spiel about the name instead of making it clear what his kernel is. This is pretty important considering there are some signficant changes he made like overclocking, voltage control, changing the RAM size. Pershoots kernel which appears to be the basis for many peoples ROMs contain more conservative changes and is pretty much the de facto kernel for the Galaxy Tab 10.1 outside of the official Samsung ROMs.

People were asking and talking about the 4.2.2 and the 4.3 build which is why I posted here.
 

mahowi

Member
Aug 7, 2012
26
4
Rennerod
Hello, lagfix/fstrim apps are not working with this rom. Is it the kernel and can I put another kernel on this rom. Im on the latest nightly - aug 10.

The error is:

fstrim: FSTRIM: Operation not supported on transport endpoint.

Question is, is this hardware or soft problem?

Thanks in advance.


Sent from my GT-P7500 using XDA Premium HD app

Same question here. Is it just the kernel or does the hardware not support trimming?

Gesendet von meinem GT-P7510 mit Tapatalk 4
 

Top Liked Posts

  • There are no posts matching your filters.
  • 114
    At pershoots request, here is the official nightly discussion thread. I will be updating this with information that I find and users posts that are helpful. REMEMBER: THIS IS A WORK IN PROGRESS SO ALWAYS READ THE THREE POST FOR UPDATED INFORMATION

    CyanogenMod 10.1 is a free, community built distribution of Android 4.2 (Jelly Bean) which greatly extends the capabilities of your tablet.
    New CM Wiki page! http://wiki.cyanogenmod.org/index.php?title=Main_Page
    New CM Documention! http://wiki.cyanogenmod.org/index.php?title=Documentation

    photo.jpg


    Usual CM disclaimers:
    Code:
    #include 
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     */

    Known Issues (copied from droidbasement):
    -A random flicker (it’s faint and fast) can be observed occasionally/infrequently. If this becomes a nuisance to you, you can try to alleviate this by selecting ‘Disable HW overlays’ in Developer Settings. This does not survive a reboot (must be selected on every boot) and impacts swiping motion (it slows it down) in Trebuchet (the Launcher).
    -P4*: A 720P recording, when played back, will have artifacts in the upper section of the image. Also when launching the recorded video for the first time, you will encounter a bit of a delay before it launches.
    -P4*:If you use the standard GAPPS (from goo), the keyboard will close if typed on for 2 or 3 letters quickly in succession, if you use Google Search, Messaging and/or Gtalk (there could be more). This is a GAPPS library issue. Install a third party keyboard (Swiftkey 3 works ok) and switch to it. This does not affect Browser, System, etc (stock KB works fine there). The GAPPS from wingray don’t appear to exhibit this behavior from brief feedback (make sure your system is cleaned out using the latest recovery (format system), prior to installing the rom and gapps if you had the set from goo installed prior (it has also been reported that data needed to be wiped as well to rid of the residuals)): http://xdaforums.com/showpost.php?p=35825009&postcount=3553
    -Wallpaper will be down aligned on the lockscreen.

    Things that need work from the community:
    Samsung Keyboard Layout
    Tell me more

    CWM:
    Make sure you have the latest (CWM 6.0.3.0)
    Download from pershoot website, select your Tab version below:

    P7510 (Wifi Only)
    http://droidbasement.com/galaxy/roms/cm10.1/p4wifi/

    P7500 (3G+Wifi)
    http://droidbasement.com/galaxy/roms/cm10.1/p4/

    SCH-I905 (Verizon)
    http://droidbasement.com/galaxy/rom...//droidbasement.com/galaxy/roms/cm10.1/p4tmo/

    Download recovery.tar.md5 and flash with ODIN or Mobile ODIN
    Links for ODIN 1.85 : MediaFire
    Links for Mobile ODIN by Chainfire Play Store and XDA

    Bootloaders: Make sure you update your bootloaders to ICS. People who flashed an ICS custom ROM coming from HoneyComb (3.1) do not have the correct bootloaders.
    Download Bootloaders from pershoot site: http://droidbasement.com/galaxy/roms/cm10.1/
    Locate your variant and flash with ODIN. *NOTE: MOBILE ODIN DOES NOT FLASH BOOTLOADERS. ONLY ODIN WILL
    Bootloader Flashing Instructions: (see image attached to post if unclear)
    1) Open ODIN, all settings should be at default, if you change anything, hit reset or make it the same as image attached.
    2) Select PDA slot and select the bootloader.tar file.
    3) Flash
    4) If unclear about the instructions, please ask!

    Modems:
    Download the recommended modem for your device at droidbasement:
    http://droidbasement.com/galaxy/roms/cm10.1/

    Install instructions are in post #3

    P4 Variants Downloads: (Please see READ ME in post #2 to avoid and confusions or headaches)

    P7510 (Wifi Only)
    http://get.cm/?device=p4wifi&type=nightly
    Changelog: http://mobile.10.1.cmxlog.com/?device=p4wifi

    P7500 (3G+Wifi) (You must be on the ICS modem for best results.)
    http://get.cm/?device=p4&type=nightly
    Changelog:http://mobile.10.1.cmxlog.com/?device=p4

    SCH-I905 (Verizon) (You must be on stock ICS (and it’s modem) before flashing to this build, for LTE functionality)
    http://get.cm/?device=p4vzw&type=nightly
    Changelog:http://mobile.10.1.cmxlog.com/?device=p4vzw

    SGH-T859 (T-Mobile)
    http://get.cm/?device=p4tmo&type=nightly
    Changelog:http://mobile.10.1.cmxlog.com/?device=p4tmo

    gapps: (update 01/29/2013)
    P75xx gapps: gapps-jb-20130129-P75xx.zip http://www.mediafire.com/?44xhky6dyx4wlw2 Credit to dreamcwli from his thread on Xoom My Android ROM 4.2.1 for original package (Please thank him for the gapps)
    Known Issues if using Goo Inside gapps or other gapp packages:
    -Hot word detection for Google Now (caused the Google Now crash when starting)
    -Gesture typing (causes random crashes when enabled)
    -Photosphere (crashing when selecting camera or after aligning shot)
    These features are removed in P75xx gapps.
    Removed any Google Apps (e.g. Play Music, Sound Search, Calendar, Gmail) that can be downloaded in Play Store: https://play.google.com/store/search?q=Google+Inc.&c=apps

    Credits:
    pershoot for his hard work
    Cyanogen for his amazing ROM
    CyanogenMOD Team for their awesome work


    Follow CyanogenMOD Team:
    Google+
    Twitter

    PSA from CyanogenMOD about non-NEON future support: https://plus.google.com/u/0/117962666888533781522/posts/8wcuSVkr7zR
    36
    Install Instructions: IMPORTANT TO SEE READ ME IN POST #2 It will save you a lot of headaches when upgrading or updating your Tablet.

    1) Install the latest CWM (see 1st post for more info)

    2) Install ICS bootloaders (1st post) *People who flashed an ICS custom ROM coming from HoneyComb (3.1) do not have the correct bootloaders.

    3) Boot into CWM and flash CM10.1 (Please see READ ME in post #2 for more information)

    4) Flash gapps-jb-20130120-P75xx.zip (see 1st post for download)

    5) Reboot

    pershoot has stated before: "best to wipe as some experience lag with multi user." and "if you get any latency/ bizarro behavior, wipe"

    F.A.Q

    Want Adobe Flash on your Jellybean Tab? (update 05/21/13) New version is (11.1.115.58)
    Check out the latest download here: http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html Scroll to Flash Player for Android 4.0 archives and download most current (11.1.115.58). *Note: Flash is not supported in Jelly Bean, no support given in this thread as well.

    Need Developer options and Performance tabs?
    Go to settings>About tablet and start tapping Build number until it says your a Dev.

    I am getting sudden reboots or freezes?
    Not all tablets are created equal, if you are experiencing sudden reboots after Overclocking, reset your options back to default.

    I am still rebooting or freezing? :(
    Do a full wipe and DO NOT install anything. If the tablet is not rebooting or freezing, install your apps one at a time to isolate the cause. If you are using Titanium Backup, DO NOT RESTORE DATA FOR SYSTEM APPS.

    I get Force Closes (FC) when I launch ____ app?
    Try clearing data for the application by going Settings>Apps and locate the app and select Clear Data.

    How can I increase Launcher performance?
    Enable wallpaper hack (Settings> Launcher>Homescreen) and select Wallpaper quick render to boost home UI response (when using a static wallpaper).

    Once I am on CM10.1, do I need to continue getting my updates at get.cm?
    No, you can update future nightly builds by going to Settings>About tablet>CyanogenMod updates. Once there, change Update types to "New Versions (incl. Nightlies)" *NOTE: Pay attention to the file name, you might occasionally see CM 9 or 10 in the list, DO NOT FLASH!

    Can I enable Voice Calling on my tablet?
    At this time, the framework has the hook enabled to allow for users to work on the feature. IT IS 100% UNSUPPORTED at this time because it requires you to flash modems which is a deviation from the recommended setup.

    I flashed ___ from another___ thread, now ___ this stopped working?
    Wipe data and flash CM 10.1 from get.cm, does this issue still happen? If so, post logcat... if not, seek support from the thread you flashed the file from.

    I HATE the new layout with the navigation keys in the middle, can I move it?
    At this time, the nav keys in the middle is the design. Who knows, CM Team might change this in future builds.

    OH NO! Where did my previous CWM backup go?
    4.2. changed the file structure on how internal storage is viewed. Data on the internal/fake sdcard will go to 0/ (i.e. /sdcard/0/; /data/media/0/) (both are the same thing).
    Since the internal storage is emulated, it is setup now (using file explorer like ES) /mnt/shell/emulated then you will see /0/; /legacy/; /obb/; and /clockworkmod/. Copy clockwordmod folder to your PC and if you need to, flash back to old ROM with old CWM and then move the backup back to /sdcard and then restore.
    Using the latest recovery, to find /sdcard while in recovery, you will need to adb to /data/media/. *Note: Make sure to have a copy on your PC, I ran out of space before restoring since it is all in the /data.

    Hey! Did you see the easter eggs!!
    So not only is there an easter egg when you press the Android version and long press on the jellybean, but if you hit CyanogenMod version, CM planted one too. But did you know that by doing the easter egg and long pressing on the jellybean, you unlock another one! Go to Daydreams under Display in settings and you will see BeanFlinger!

    My sound is really low or really high when I am using headphones!
    If you are having really low or high volumes while listening with headphones, I recommend Voodoo Sound from Supercurio in the Play Store (Link). This allows you to take control of your volume and change it to your preferences.

    I see cm-10.1-xxxxxxxxx-UNOFFICIAL-p4xxxx.zip on Droidbasement, what's the difference between droidbasement builds and nightlies?
    The UNOFFICIAL builds on droidbasement are experimental builds compiled by pershoot for testing. It is recommended to flash the nightly builds unless specifically asked to test an unofficial build.
    32
    READ ME:

    #If using 4.2.2 and want to roll back to 4.2.1 (last build is Feb 13th), you will need to do a full wipe to move backwards or you will bootloop. (update 02/19/13)

    #PSA from CyanogenMod team: https://plus.google.com/+CyanogenMod/posts/M2pVM7Y6MTq (update 02/19/13)
    ADB Whitelist

    As of the Android 4.2.2 update, when you connect your phone to a computer, you are presented with your computer's RSA key fingerprint to open the adb connection. You also have the ability to permanently trust the computer, so you don't have to repeat this step upon every re-connect.

    In order for this to work, you must be on the latest SDK which will grant you an updated 'adb' binary.

    We will not be introducing any functionality to sidestep this default security, so if you don't update, you will lose the ability to access the device using adb.


    # CM 10.1 is based on Android 4.2.1. Any and all proprietary applications that you have installed outside of CM should be updated to their 4.2.1 counterparts. Do not use the 4.1 versions of proprietary applications, else you will experience difficulties.

    # Do not use the CyanogenMod Updater to go from 10.0 to 10.1. While you will have a functional rom, due to the 1st bullet point, you will be left without your proprietary applications and their data. We highly suggest performing the initial install manually via recovery (flashing CM and your addons). Once you are on 10.1, you can use the CM Updater as per normal.

    # You do not need to wipe when updating to 10.1 if coming from an earlier CM version. However, as we mentioned in the weekend's PSA, users updating (instead of wiping) will experience a conflict in the application data for the Clock app. You are advised to clear this apps data on first boot of 10.1.

    # Another item to note is that the support for the 10.0 feature that allowed for an expanded number of targets on the pattern lockscreen is not in 10.1. If you use this lockscreen, disable it before updating from 10.0.

    # Finally, we always advise that you create a backup before any update. Do note, however, that due to Android 4.2 changes to support multi-user mode, your backups will automatically be transferred to /sdcard/0/[backup folder]. Remember this when attempting to restore 10.0. Credit to post from CyanogenMOD team (G+ https://plus.google.com/+CyanogenMod/posts/9X561GFMxL5)

    Coming from Samsung ICS ROM (custom or not) requires a FULL WIPE (Wipe Data, Cache, and Dalvik Cache) If you do not WIPE you will get a bootloop.

    From droidbasement:
    GT-P7500 (p4), GT-P7510 (p4wifi), SCH-I905 (p4vzw) and SGH-T859 (p4tmo)
    -For P4VZW: You must be on stock ICS (and it’s modem) before flashing to this build, for LTE functionality
    -For P4WIFI UK: You must be on the US ICS bootloader (odin .tar.md5 inside the .zip in the folder), otherwise you may incur a rolling screen
    -For P4: You must be on the UK ICS bootloader (odin .tar.md5 from AUS inside the folder), otherwise you may incur a rolling screen.
    -For P4*: You must be on the ICS modem for best results.

    BEFORE REPORTING ANY BUGS, PLEASE DO A FULL WIPE AND FLASH AGAIN TO VERIFY THE BUG! ALSO, NOTHING WILL GET FIXED WITHOUT A LOGCAT (we cannot debug xda posts, need a logcat)

    Getting a logcat:

    1) Make sure ADB is installed (http://developer.android.com/sdk/index.html)

    2) Open Command Prompt

    3) adb logcat -d > logcat.txt

    4) Locate the logcat and upload to xda
    20
    all, im working on bringing in a new wifi driver which should solve numerous issues and add some more functionality.

    just need to solve one last issue with it (speed is capped when using it on this device).

    once that is sorted (if can be done in a timely manner), then ill put out tests for all devices to ensure it works well in various scenarios.
    18
    sorry all, i've been hella busy at work and also been feeling under the weather as of late.

    will get back to this when i can (have some more things i wanted to do).