Bricket ATT Tab 3

Search This thread

dsavija2

Member
Jan 24, 2012
18
0
Nope I gave up on that for little while. Att bootloader is locked from what I read. Not much you can I can do at this point

Sent from my SAMSUNG-SGH-I337 using Tapatalk
 

konsolen

Senior Member
Jan 28, 2012
240
130
Vienna
Nope I gave up on that for little while. Att bootloader is locked from what I read. Not much you can I can do at this point

Sent from my SAMSUNG-SGH-I337 using Tapatalk

hi, i like to help you with your Problem.
I have a Odin Version that work with your tab.
Also i can give you the first 4.2.2 for your AT&T Tab.(Form 7.2.2014)
http://terafile.co/6d77308e882d/T217AUCUAMHC_T217AATTAMHC_ATT.zip
This Odin Version will work with your tab. Install the correct USB drivers.
 
Last edited:

dsavija2

Member
Jan 24, 2012
18
0
Sweet man thanks. I am going to try this out tn. I ll let you know how it goes. I hope it works.

Sent from my SAMSUNG-SGH-I337 using Tapatalk
 

dsavija2

Member
Jan 24, 2012
18
0

fix-this!

Senior Member
Apr 15, 2012
4,263
736
midwest
  • Like
Reactions: adeptustech

egyson

Member
Oct 27, 2014
5
0
Hello Dear Konsolen,

I need your help about my problem with Samsung Galaxy Tab 3 T217A

I download firmware from sammobile.com

but when i use it by Odin , fail and now no booting , i can enter download mode , but i can't enter recovery mode .

i try to download the firmware link you put it in terafile.co but link became Invalid

i hope you can help me to get this file to repair my Tab

Thank you for your interest
 
Last edited:

egyson

Member
Oct 27, 2014
5
0
Thank you konsolen for link ,

But i still have same problem still no booting

i use Odin 3.07 with firmware you uploded , but alos fail

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T217AUCUAMHC_T217AATTAMHC_T217AUCUAMHC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)

Do you have solution !!! :(
 

rmntruexjr

Senior Member
Apr 7, 2011
377
164
Maine
Thank you konsolen for link ,

But i still have same problem still no booting

i use Odin 3.07 with firmware you uploded , but alos fail

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T217AUCUAMHC_T217AATTAMHC_T217AUCUAMHC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)

Do you have solution !!! :(

From what I've read, if you bricked it while or after you upgraded to 4.4.2, the locked bootloader and knox will keep you from going back to 4.2.2 on an SM_T217A.

I upgraded to 4.4.2 then tried to downgrade back to 4.2.2 and bricked it. (same error)

Every day I search for an Odin flashable 4.4.2 for the SM-T217A hoping that at least flashing the 4.4.2 will work to get it back...No luck finding one yet...Kies still only has the 4.2.2 firmware so that doesn't work.

Why lock the At&t variant but not any other SM-217'?:confused:
 

egyson

Member
Oct 27, 2014
5
0
From what I've read, if you bricked it while or after you upgraded to 4.4.2, the locked bootloader and knox will keep you from going back to 4.2.2 on an SM_T217A.

I upgraded to 4.4.2 then tried to downgrade back to 4.2.2 and bricked it. (same error)

Every day I search for an Odin flashable 4.4.2 for the SM-T217A hoping that at least flashing the 4.4.2 will work to get it back...No luck finding one yet...Kies still only has the 4.2.2 firmware so that doesn't work.

Why lock the At&t variant but not any other SM-217'?:confused:

I have sam problem ,

i try to find new Firmware 4.4.2 for T217A

AT&T already have new firmware , but i can't find it

4.4.2 Firmware : T217AUCUCNG2

If you can find it , please share the link
 

rmntruexjr

Senior Member
Apr 7, 2011
377
164
Maine
I have sam problem ,

i try to find new Firmware 4.4.2 for T217A

AT&T already have new firmware , but i can't find it

4.4.2 Firmware : T217AUCUCNG2

If you can find it , please share the link

I have no idea how long it will take before sammobile gets the firmware, but I'm guessing since the firmware isn't even available using kies yet, that it will be a long wait.

It seems crazy to me for at&t to roll out an update with no way to recover if something goes wrong...I mean, from some of the posts I've read, some devices may have updated to 4.4.2 on their own without the users knowledge until after the fact. If that's true it just makes it even more crazy.

Edit: I found an app in the play store that supposedly would catch the ota and save it so you can flash it on another device. No idea if it would work but I wanted to try it. I have a second t217a still on 4.2.2 so I thought I would give it a go.....Nope!!!.... Apparently, only the t217a I bricked was eligible for the upgraded firmware(?) because my 2nd t217a was set up exactly the same as the 1st, yet when I search for update it says there is none.

Oh well... From what I saw after the 4.4.2 on the 1st tab (the reason I bricked it trying to go back), I'm probably still less frustrated with a brick.
 
Last edited:

Satan_Neil

Member
Mar 27, 2014
46
30
Take it to your nearest Best Buy and find the Samsung center inside the store and they will flash the new firmware for you.. I had do the same thing on my note 3 when 4.4.2 was released. Hope that helps.
 

miw2008

New member
Mar 12, 2015
1
0
it's new firmware , T217AUCUCNI1

any one have it ?
I have to change the version 4.2.2 but I can not throw a link here.
my skype: miwakrut
this is old version T217AUCUAMHC 4.2.2, but then removed boot.
I made it myself from the original firmware
Worning!!! If you installing this version maybe you lose your warranty.
 
Last edited:

Top Liked Posts