My Friend's borrowing me the CSL Mi-700 Device, so I can start to development for this device, but this project will closed anytime when my friend want his device back.
Untill now I have successfully to porting the CM7 ROM to this device, but need more bug fixing, and will not release in short time.
But for now I will release my first version of FM6 variant ROM
This ROM is based from the latest Official Release by Viewsonic, I just add / remove some feature in this ROM.
Kernel feature:
ROM feature:
On this ROM I'm using Clockwork recovery 2.5.1.2 from hucqim80
I AM NOT RESPONSIBLE FOR ANY DAMAGE DONE TO YOUR DEVICE BY FLASHING THIS ROM
highly recommended to charge your cell phone at least 90% to prevent failure during flashing process...
Download Link:
FM6-3310-0-5029-Andro-ID.7z
Warning:
The overclocked kernel is not compatible with the newer device that using ITE Touchscreen Hardware instead Panjit Touchscreen
but the newer device still can use this ROM with stock kernel, you can download from this link:
ITE_TS_boot.7z
For the flashing process with fastboot mode, read the second post.
Flash With SUT:
SUTL3_v1.6.5.zip
This is the latest Original Official Firmware from Viewsonic:
FM6-3310-0-5029-A02.nb0
You can see all version on Official firmware from View Sonic in this link:
vsg.viewsonic.com/ViewPad7
Credit Info
Thank you very much for:
cahyanb200 for borrowing CSL Mi-700
dsixda for your great Kitchen
hucqim80 and koush for the Recovery
mendozinas for battery percentage (UOT-Kitchen)
creator2456 for GB Blackout KB
And all people that was help me on this project..
Untill now I have successfully to porting the CM7 ROM to this device, but need more bug fixing, and will not release in short time.
But for now I will release my first version of FM6 variant ROM
This ROM is based from the latest Official Release by Viewsonic, I just add / remove some feature in this ROM.
Kernel feature:
- Overclocked up to 864MHz
ROM feature:
- Froyo 2.2.2 FRG83G
- Root installed
- Busybox installed
- Bash installed
- Gingerbread Blackout Blue installed
- Percentage Battery meter installed
- Doc to go removed
- Touchpal removed
- File manager replaced
On this ROM I'm using Clockwork recovery 2.5.1.2 from hucqim80
I AM NOT RESPONSIBLE FOR ANY DAMAGE DONE TO YOUR DEVICE BY FLASHING THIS ROM
highly recommended to charge your cell phone at least 90% to prevent failure during flashing process...
Download Link:
FM6-3310-0-5029-Andro-ID.7z
Warning:
The overclocked kernel is not compatible with the newer device that using ITE Touchscreen Hardware instead Panjit Touchscreen
but the newer device still can use this ROM with stock kernel, you can download from this link:
ITE_TS_boot.7z
For the flashing process with fastboot mode, read the second post.
Flash With SUT:
SUTL3_v1.6.5.zip
This is the latest Original Official Firmware from Viewsonic:
FM6-3310-0-5029-A02.nb0
You can see all version on Official firmware from View Sonic in this link:
vsg.viewsonic.com/ViewPad7
Credit Info
Thank you very much for:
cahyanb200 for borrowing CSL Mi-700
dsixda for your great Kitchen
hucqim80 and koush for the Recovery
mendozinas for battery percentage (UOT-Kitchen)
creator2456 for GB Blackout KB
And all people that was help me on this project..
Last edited: