########################################################################################################
Flash instruction:
- Put Flash.dio and XDA_UC folder on SD card (SD should be <=2G)
- Hold mute + record together and finally press power and release all 3 together
- SDloader appear and will clean boot when done
- During clean boot, you will need to wait for 2 beeps sound before you see the welcome screen,the phone will be unresponsive at that point
Step-by-step guide on flashing the HP iPaq 600
########################################################################################################
Q: Manila right softkey is named "programs", but by pressing on it launches camera
It is a known bug related to M2DC (M2D Config). Exactly after flashing all should be correct, but if you open M2DC, change something in it and accidentally press to softkey tab and then press ok (without modifing softkeys) M2DC automatically redefine softkeys to their default values Phone and Camera. So this bug is related to M2DC. Because i am not a developer of this program, i cant fix this.
Solution:
by default softkeys are set to
Code:
[HKEY_LOCAL_MACHINE\Software\HTC\Manila2D\Home]
"SK1"="Contacts"
"SK1Cmd"="\\Windows\\Start Menu\\Programs\\Office\\Contacts.lnk"
"SK2"="Programs"
"SK2Cmd"="\\Windows\\folderview.exe"
Q: I have a delay (2-5 sec) after I answer my phone
It is problem of all winmobile devices.
Solution:
Use default winmobile dialer
Install this cab or
Change key to zero
Code:
[HKEY_LOCAL_MACHINE\Security\Phone\Skin]
"Enabled"=dword:00000001
Q: When i create New Folder in WM6.5 StartMenu icon is ugly.
You can change folder picture. See code below, it is made for my two folders: Multimedia and Office. Copy attached folder icon to Windows dir and edit registry by analogy with code below.
Code:
[HKEY_LOCAL_MACHINE\SECURITY\Shell\StartInfo\Start\Multimedia]
"Icon"="\\Windows\\Start_Icon_Multimedia.png"
[HKEY_LOCAL_MACHINE\SECURITY\Shell\StartInfo\Start\Office]
"Icon"="\\Windows\\Start_Icon_Office.png"
Q: When my pda battery left about 35%, the pda starts to scream "Low Battery Voltage detected" and then after 10 seconds the pda will turn off.
It is related to bad calibration of your battery or your battery is bad (old)
Solution:
Buy a new battery.
Before you buy new battery, try this solution
Discharge your battery to 0% with video. Then without turning it on charge to 100%. Should happen recalibration of battery, if it is not so old.
If dont work this, so buy a new one.
Q: How can i see default windows keyboard, Block Recognizer and Letter Recognizer
They are hidden by default
To make them visible use small utility
SIP Manager
Q: Weather on Home page dont work
It uses your GPS location. Updates only with WiFi. Of course, GPS signal dont work in houses, be closer to window or the best result be out of house.
One more solution with Mortscript
Q: My town is not in the weather list. Can i add more cities to manila weather?
Q: I dont see Missed Calls on Home tab
With new Manila v2.0 it is impossible to show them on home tab, even with M2DC.
Q: I'd like to use outlook as default calendar and default Task application.
Copy
two files to Windows dir. From Home page will be access to default calendar. Find shortcut of tasks.lnk and copy it to StartMenu. You will have access to default tasks.
Q: ActiveSync is always running
Q: How can i watch streaming live TV?
Q: D-PAD: How to use it?
It works like this: hold down the end call button for 1 second, and the red LED will light up to let you know it's working. When it's on, the number pad keys have the following functions:
1:Home 2: Up 3: Page up
4: Left 5: Enter 6: Right
7: End 8: Down 9: Page Down
0: Tab
To switch back, just hold down the end call key again.
Also, you can change the backlight by holding down the Windows key and a number:
win + 7: 1st level of screen brightness, with the keyboard backlight off. Good for using indoors in average lighting.
win + 8: 2nd level of screen brightness, also with keyboard backlight off. Good for bright rooms and outdoors.
win + 9: Brightest level (use when in direct sunlight)
win + 0: Lowest brightness level, keyboard backlight on. Good for dark rooms and nighttime.
Q: HTC Keyboard Customization (Not for builds with
EzInput 2.1)
Language packs and XT9
[
ABC as Default] - Set ABC as default IME for hardware and software keyboards.
[
T9 as Default] - Set T9 as default IME for hardware and software keyboards
NB!
Not all languages work correctly, some languages dont have hardware support (only numbers from hardware keyboard)
To view language you should manually add your language code to the registry.
Code:
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9]
"AvailableLanguages"="0109[COLOR="Red"],0119,01OC[/COLOR]"
Choose language by pressing "*" sign on keyboard (Not from Personal -> Input Menu)
User Customization FAQ
1) Why XDA_UC folder is needed?
What the XDA UC service does, is silently install (or not so silently if needed by User), .cab, .xdas, .xml, .reg, .mscr. This happens either at first or second boot
2) How can i create automatically Email account?
3) How can i create automatically Exchange server
4) How can i set automatically TimeZone and Weather
5) Additional options
Useful INFO
How to dump Ipaq 614c
Ipaq 614c French ROM