[ROMS]NEW! Dualboot Mirage CM7 / ICS CM9 Image for SDcard [5/4]

Hello NookPeeps!

TRIPLE-BOOT your nook color with Stock on EMMC and Dualboot CM7/CM9 on your SDcard!!

________________________________________________________________________________


Update 5/4/12: Flashable zip update for Mirage CM7.2 / ICS CM9 OpenGL & Non-OpenGL. See second post for more info. ________________________________________________________________________________

Update 3/26/12: Flashable zip update for Mirage CM7.2 / ICS CM9 OpenGL & Non-OpenGL / MIUI GB & ICS. See second post for more info.

________________________________________________________________________________

Update 3/6/12: Flashable zip update for Mirage CM7.2 / ICS CM9. See second post for more info.
________________________________________________________________________________

Update 3/4/12: Seems we're still having some issues with the Mirage/ICS image being uploaded to the server. I've removed it from the techerrata server for the time being. Please download the file from the 4shared and Wupload links I posted at the bottom of this post. Sorry for all the trouble.
________________________________________________________________________________

Update 3/2/12: New flashable zips for Mirage CM7.2 / ICS CM9 / MIUI 2.2.4. All downloads will now be hosted on the TeamWin Techerrata server. Links are now at the bottom of this post. For info on the updates, please see second post.
________________________________________________________________________________

Update 2/19/12: New flashable zip for MIUI 2.2.3 and update for my DualbootSD CWM Recovery (nandroid capable!). See second post for download and instructions.
________________________________________________________________________________

Update 2/17/12: New flashable zip update for ICS w/ Cornerstone by OnSkreen v2. See second post for download and instructions.
________________________________________________________________________________

Update 2/2/12: New flashable zip updates for Mirage and ICS. See second post for download and instructions.
________________________________________________________________________________

Update 1/27/12: Updated OP with working download links. Please let me know when a link goes down so I can reup. Big thanks to user "terra-starr" for hosting on his dropbox account.
________________________________________________________________________________

Update 1/19/12: New flashable zip update built this morning. See second post for download and instructions.
________________________________________________________________________________

Update 1/17/12: Gapps Calendar, Email and TTS Fix. See second post for download and instructions.
________________________________________________________________________________

Well it's been a while since I've updated my DualbootSD thread. But since things are much bigger and better now with CM7 and CM9. Figured I'll prep a new IMG file that you can dualboot Mirage CM7 Kang and the latest greatest ICS CM9 off one SDcard. I did this because I do love ICS but still have the need to go back to CM7 for my own personal reasons, but figured I'd share it with everyone as well.

1-I've prepped the image file to be 3.7gb, so that no one will have issue's burning it to a 4gb SDcard or larger.

2-Both roms share the same SDcard partition. So on a 4gb card, the available space is limited to 1.4gb.

3-If you use an 8gb SDcard. To get use of the remaining storage on your SDcard. Just burn the image and then use EASUS Partition Manager to extend the SDcard partition. (Which is the 7th partition on the card)

4-Primary boot is Mirage CM7 Kang from his 01/13/2012 build (uImage/uRamdisk)
-V6 SuperCharger by zeppelinrox included (read below on how to install)

5-Secondary boot is ICS CM9 was built on 01/14/2012 with the following additions (uAltRam/uAltImg):
-Added telephony-permissions-fix by Samiam303 to allow phone specific apps to show in market
-Added bootanimation fix by Homer_S_XDA (make sure you thank him)
-Make sure you thank Samiam303 for posting the zips on his thread here

6-Gapps included but not baked into the rom, read below to find out how to install

7-This .img also includes a modded CWM Recovery that only works with .zips from this thread. Do not use it to flash with anything else besides .zips prepped by me for this thread!


Please follow below instructions completely before posting issues!
___________________________________________________________________________________

1-Download the .zip at the bottom of this post

2-Follow the same directions as you would burn a NookieFroyo SDcard from NookDevs.com here.

3-After you burn the card, plug the SDcard into your nook and power on. Leave it alone and it will boot to the primary boot which is Mirage CM7 Kang and connect to a wifi connection.

4-Power off nook or reboot and boot to secondary boot which is ICS CM9 by holding down the volup+voldown together during boot and it should boot up Alternate Boot which is (uAltImg/uAltRam)

5-Once booted to ICS CM9, again connect to a wifi and then power off.

6-Now power on nook again and this time hold down the button to get to the boot menu and choose SD Boot --> uRecImg/uRecRam.

7-Choose to 'Install zip from SDcard --> Choose zip from SDcard --> Now choose, gapps-GB-20110828-signed-DualbootSD.zip. Once that's completed now choose, gapps-ICS-20111125-2-DualbootSD.zip

8-After you're done flashing both Gapps, now you're ready to boot into your roms and sign into market. I don't think I need to go any further explaining how to do so.

9-Optional, but if you want to supercharge your Mirage CM7 Kang with the V6 SuperCharger Script by zeppelinrox. All you have to do is boot the Mirage and start up Terminal Emulator and do the following:
- su
- cd /sdcard
- sh V6*
- choose option 0 (fastest scroll)
- choose 9
- choose option 16 to reboot

10-Please be patient with your roms. Give it a minute or two on first boot. It also depends on what brand and class of SDcard you have. I've tested it on both a Sandisk 8gb Class 4, as well as a PNY 4gb Class 2. The roms ran much better on the Sandisk than it did on the PNY card. Read this thread by Blue6IX for more info on SDcard read/write speeds.

11-Oh for the ones that are gonna take this image and start selling it on Ebay as well as N2A, you guys suck!! But to each his own I guess.

12-And finally enjoy your DualbootSD roms!! Now you can triple-boot your nook!


Take it or leave it, just hope you enjoy it.

Thanks to all the devs for all their hard work in getting these great ROMs for our Nook Color.

Credits:
Fattire and the CyanogenMod Team
Koush(for his CWM Recovery)
Samiam303
Mrg666 (for Mirage CM7 Kang)
Homer_S_XDA (for the bootanim fix)
zeppelinrox (for the V6 SuperCharger Script)
Hockeyfamily737 (for MIUI v2.2.4)
TeamWin (for graciously allowing me to my files with them)
If I'm forgetting someone, please let me know!

Download:

You can now find all my downloads on the TeamWin techeratta server. Thanks eyeballer & kevank! All roms are categorized into their own folders. All zips should be in sequential order by date. Their is also a miscellaneous folder which contains all other optional zips that you would like to flash.

http://techerrata.com/browse/nook/racks

Click to expand...

Click to collapse

If I've helped in some way, please say thanks in one way or another!

Thanks,
Racks

Update 5/4/12
_________________
Flashable zip for Mirage CM7.2 / ICS CM9 OpenGL & Non-OpenGL
-Mirage CM7.2-RC1 latest build 4-16-2012. (Primary boot)
-ICS CM9 non-OpenGL & OpenGL builds. 5-1-2012. (Secondary boot) Thanks again to eyeballer for letting me use his build for our dualbootSD.
-Remember to flash gapps after flashing the roms.
-Download the zip and place it on the SDcard partition of your DualbootSD rom
-Everyone should know how to flash by this point. If not, you should continue reading.
-After done flashing, reboot and you should be good to go!
-FYI: I'll try to update with flashable zips when ever I have time. But for now.. I've written a tool that will convert any standard rom zips for my DualbootSD. Check out the "Convert2Dualboot-SD Tool" thread HERE for more info!! Good luck and happy flashing!

______________________________________________________________________________________________

Update 3/26/12
_________________
Flashable zip for Mirage CM7.2 / ICS CM9 OpenGL & Non-OpenGL / MIUI GB & ICS
-Mirage & MIUI flashable zips will flash to primary boot. Only ICS CM9 will flash to secondary.
-Mirage CM7.2-RC1 latest build 3-23-2012. (Primary boot)
-MIUI Gingerbread 2.3.9 & ICS Alpha v4 MIUI 2.3.9 (Primary boot)
-ICS CM9 non-OpenGL & OpenGL builds. 3-25-2012. (Secondary boot) Thanks again to eyeballer for letting me use his build for our dualbootSD.
-Remember to flash gapps after flashing the roms.
-Download the zip and place it on the SDcard partition of your DualbootSD rom
-Everyone should know how to flash by this point. If not, you should continue reading.
-After done flashing, reboot and you should be good to go!
-If after flashing a rom and it gets all wonky you might want to go ahead and try using an app like Titanium Backup and backup all your apps. Then boot into the CWM for DualbootSD that is included with the DualbootSD image and got to "mounts and storage" and choose to format either /system1 & /data1 for primary boot or /system2 & /data2 for secondary boot. And then flash the update zips that you have just downloaded and see if it makes any difference.

______________________________________________________________________________________________
Update 3/6/12
_________________
Flashable zip for Mirage CM7.2 / ICS CM9
-Mirage CM7.2 latest build 3-4-2012. It says 3-5-2012 because that's the date when it was prepped for dualbootSD.
-ICS CM9 non-OpenGL build. 3-5-2012. OpenGL is broken at the moment. You'll find it much smoother with OpenGL disabled though. But no flash. Thanks again to eyeballer for letting me use his build for our dualbootSD.
-Remember to flash gapps after flashing the roms.
-Download the zip and place it on the SDcard partition of your DualbootSD rom
-Everyone should know how to flash by this point. If not, you should continue reading.
-After done flashing, reboot and you should be good to go!

______________________________________________________________________________________________
Update 3/2/12
_________________
Flashable zip for Mirage CM7.2 / ICS CM9 / MIUI v2.2.24
-First off I want to thank TeamWin, specifically Eyeballer & Kevank for setting me up with their server to host my files. Everything will be in much better order now! Thanks guys!
-Mirage CM7.2 update 3-1-2012. More info here.
-ICS CM9 OpenGL update 3-1-2012. My repo is full of changes uncommited at the moment. So eyeballer was nice enough for me to use his build.
-MIUI v2.2.24. Thanks to hockeyfamily for allowing me to prep this for my dualbootSD. This will install in the primary boot. So it will replace your current Mirage build. It is also recommended that you perform a full wipe when going from one rom to the next. You can do so by booting into the CWM that is included with the dualbootSD and go to "mounts and storage" and choose to format "/system1" "/data1". Remember to also wipe cache.
-For MIUI v2.2.24, after flashing. Make sure you download and flash "gapps-MIUI-v2.2.24-20111125-DualbootSD.zip"
-Gapps ICS 2-24-2012 are borked for some reason. I will reupload when I figure out what's going on.
-There's also a flashable zip for the new CM9 bootanimation in the miscellaneous folder if you want to flash that after flashing the rom.
-Download the zip and place it on the SDcard partition of your DualbootSD rom
-Everyone should know how to flash by this point. If not, you should continue reading.
-After done flashing, reboot and you should be good to go!

______________________________________________________________________________________________
Update 2/19/12
_________________
Flashable zip for MIUI 2.2.3
1. MIUI 2.2.3 updated by 'hockeyfamily737'. This zip will replace your first boot rom on your DualbootSD. Which would be your CM7 rom. See more info here about MIUI 2.2.3.
2. If after flashing you find it unstable and since this is a completely new rom, I would recommend when booting into the DualbootSD CWM Recovery, go to 'Mounts and Storage' and choose to format '/data1' before flashing. You might not have to, and although MIUI is based off CM7. I'm not sure how it will affect your system without doing so.
3. Remember to flash the CM7 gapps that was included w/ your dualbootSD as well.

DualbootSD CWM Recovery Update v2:
1. You can now perform a full Nandroid backup of your DualbootSD, if you have the room to do so of course.
2. Unfortunately, when doing a Nandroid backup, it will backup both roms. I haven't edited the code to give you the option of which rom to backup yet. Maybe sometime in the future.
3. You can now choose which system you would like to wipe dalvik-cache for.
4. Restore only the /system you choose to by performing an 'Advance Restore' in the CWM menu
5. I will work on specific nandroid backups as well as fix permissions on next release.

-Download the zip and place it on the SDcard partition of your DualbootSD rom
-You should know how to flash by now.
-After done flashing, reboot and you should be good to go!

Download:

Update-Encore_MIUI_2.2.3_DualbootSD_02192012.zip
MD5: d47de4896f2df81832b1462616701a3c
4shared

CWM-DualbootSD_v2-Nandroid-Capable.zip
MD5: 01b46e85f7b5e8f35b32a0f3a5070dc7
4shared

Click to expand...

Click to collapse

______________________________________________________________________________________________
Update 2/17/12
_________________
Flashable zip for CM9 ICS w/ Cornerstone by OnSkreen v2.
-Baked in Cornerstone by OnSkreen! This is just a beta test. So if you want something stable, do not flash this! But if you want to test out what else would be possible for our Nook Color, go ahead and flash!
-Got alot more to work out before it's fully functional, but it works!
-Fixed phone UI layout. Now tablet UI layouts correctly. Thanks hacdan for the help.
-Check this post for screenshots and bug reports.
-Remember to flash the gapps as well.
-Remember to flash the calendar, email, tts syncing fix.
-Download the zip and place it on the SDcard partition of your DualbootSD rom
-Follow same directions as below for flashing.
-After done flashing, reboot and you should be good to go!

Download:

Update-Encore_CM9_DualbootSD_02132012_OnSkreen_v2.zip
MD5: 35042448b8c3ff6a837ddf133562c2dd
4shared

Click to expand...

Click to collapse

______________________________________________________________________________________________
Update 2/2/12
_________________
Flashable zips for Mirage build "MiRaGe-02012012" and CM9 ICS which was built this morning for you flashaholics out there.
-See MiRaGe thread for info on the latest update here.
-For ICS, I went ahead and included the updated SGX drivers as per Fattire's post here. Remember this is experimental!!
-For ICS don't forget after flashing gapps to flash the calendar, email, tts syncing fix from below as well.
-Download the zip and place it on the SDcard partition of your DualbootSD rom
-Follow same directions as below for flashing.
-After done flashing, reboot and you should be good to go!

Download:

Update-Mirage_CM7_DualbootSD_02012012.zip
MD5: 3800a7702cb540feb1153d20f471e9d3
4shared | Dropbox

Click to expand...

Click to collapse

Update-Encore_CM9_DualbootSD_02012012.zip
MD5: bf49f76849740cb0f78883017cc430b0
4shared | Dropbox

Click to expand...

Click to collapse

______________________________________________________________________________________________

Update 1/19/12
_________________
Here's a flashable zip built this morning for you flashaholics out there.
-This includes the fix for multi-touch to function properly by keyodi.
-You might have to reflash gapps as well as the calendar, email, tts syncing fix from below.
-Download the zip and place it on the SDcard partition of your DualbootSD rom
-Boot to the Modded CWM Recovery that is included with the DualbootSD by choosing SD Boot --> uRecImg/uRecRam from the boot menu.
-Choose 'Install zip from SDcard' --> Choose zip from sdcard --> Update-Encore_CM9_DualbootSD_01192012.zip
-If you have the gapps*.zip and the calendar-email-tts-fix*.zip. Go ahead and flash it now.
-After done flashing, reboot and you should be good to go!

Download:

Update-Encore_CM9_DualbootSD_01192012.zip
MD5: 3f791ce4d8680e3334feb3bb5be014e7 (I had the incorrect md5 listed before. Thanks 'Michigeezer' for pointing it out to me! )
Wupload | Fileserve | Dropbox

Click to expand...

Click to collapse

______________________________________________________________________________________________

Update 1/17/12
_________________
I wasn't aware there was a fix for the Calendar and Email syncing issues until it was brought up to me by webdroidmt here. So I went ahead and prepped a flashable .zip for the fix.
-Download the zip and place it on the SDcard partition of your DualbootSD rom
-Boot to the Modded CWM Recovery that is included with the DualbootSD by choosing SD Boot --> uRecImg/uRecRam from the boot menu.
-Choose 'Install zip from SDcard' --> Choose zip from sdcard --> gapps-ics-calendar-email-tts-fix-DualbootSD.zip
-After done flashing, reboot and you should be good to go!

Download:

gapps-ics-calendar-email-tts-fix-DualbootSD.zip
MD5: 68e57b1b716657d385e350dee3f3b147
Wupload | Fileserve | Depositfiles | Dropbox | 4shared

Click to expand...

Click to collapse

______________________________________________________________________________________________


Reserved! Finally I've reserved the second post on my own thread!!

Well I don't plan on updating the roms often unless there are some major changes that calls for it. And I've made it simple for everyone to do so once that day comes. As I stated in the OP this .img comes with a modded CWM Recovery that is meant only for .zips that are prepped for this thread!

So I will be prepping update.zips when the day calls for it. Till then please enjoy your DualbootSD roms! And please keep issues with the DualbootSD in this DualbootSD thread and not clog up the other threads. I'll try and post known issues as the days go by.

Thanks again!

-Racks

fattire said:

bolup+voldown together during boot should get you to the altboot automatically without having to go through any menu. (Not that I don't love the menu!)

Nook Color Tweaks should allow you to set a default boot configuration.

Click to expand...

Click to collapse

Huh, didn't know that?!

I've edited my OP with you're tip.

Fattire always the gentleman and always willing to lend a helping hand to make our lives that much easier.

Hats off to you sir for all that you've done for us NookPeeps!

-Racks

mtr33 said:

Wow, great timing racks I was just looking for a way to experiment with CM9 without losing CM7. This saves me having to switch cards (which I would invariably lose altogether). I guess it only works with your prepped CM7/9 builds though? Not that it matters, just making sure I understand correctly.

Click to expand...

Click to collapse

This is a prepped .img file with CM7/CM9 on it. If there are any updates. Only use the .zips from this thread because not only CWM Recovery has been modded to work only with the dualboot card. The zips itself needs to be modified to flash correctly. As well as modified ramdisk, fstab.... etc. to boot and work correctly with the DualbootSDcard.

But you could always use TitaniumBackup and backup all your apps and restore it to the Dualboot card if you wished. It should work. Haven't tried it myself though.

Good luck!
Racks

AidenM said:

Is CM9 the prebuilt one or your own compiled?

P.S: Thanks for posting on G+. Don't check these forums much

Click to expand...

Click to collapse

Compiled. Since the last prebuilt (sneakpeakfullofbugs2.zip) was from much earlier than 1/14/12.

-Racks

smarcin said:

I bet I was one of the first to download your ROMS at a little after 10 last night. My husband is probably mad at you and me, since I played with my NC until after 2 am!........................

I have already thanked you on your first post, racks, but I thank you again. I hate to sound piggy, but is there any chance you could make up a zip that includes Miui? It's not my favorite ROM, and there are problems with the Market on the NC. But it would be fun to be able to switch back and forth and show it off to my friends that run Miui on their phones.

Click to expand...

Click to collapse

Hahaha, awesome. This is why I try to contribute what I can to this community. It's comments like these that makes it all worth while. Oh and I might (might being the keyword) prep an MIUI update zip for the dualboot card. It will probably replace the primary boot though. No ETA's yet.

bobshute said:

OK...I installed and everything is perfect. Thanks Racks ...........................
So I burned the img on a SanDisk 8GB cl4 SDcard, expanded the sdcard partition and followed the install proceedures. When complete I downloaded Titainium Backup from the market, pointed it to the correct backup, and restored all my apps for each OS.

All worked great...

Click to expand...

Click to collapse

Thank you sir for confirming that backing up and restoring with Titanium Backup worked without a hitch!

AidenM said:

Cool.

Also, if I flash CWM from ROM Manager in one of the sd roms it will still flash to the emmc right?

Thanks.

Click to expand...

Click to collapse

Yeah, I wouldn't do that though. I have no idea what will happen. But most likely it would just flash to emmc boot. Let me know what happens if you do happen to be brave and do so.

AidenM said:

Ok. trying it now.

P.S Can i have your address? I'll give you a visit if it doesn't work

lol j/k thanks!

Edit

OK just flashed it and it booted!

Click to expand...

Click to collapse

Ok, so I guess you just flashed CWM Recovery to your EMMC then. Can you try booting to the uRecImg/uRecRam off the SDboot just to make sure it didn't replace the modded one I had there?

Thanks!
Racks

les02jen17 said:

racks... is it possible to have dual boot in the emmc?

Tapatalkin' it from my rooted NookColor running CM7 MiRaGe [KANG] [7.2 RC] overclocked @ 1.2 GHz

Click to expand...

Click to collapse

It is possible, but someone has to prep the .zips to flash to the correct partitions. If someone wants to take a crack at it. Just download one of the .zips from rookie1's thread here. And take a look at the edify script, you would also need to modify the uRamdisk so it boots the correct /system as well.

Don't have time for that at the moment. Working on something else with another dev for you great people!

-Racks