[Q] X10 Mini is froozen & not starting

---

Hi,
I have a problem with my x10 mini E10i ,,,,,,, the problem as follow:
I tried to install GingerBread But I think that i have made some steps wrong ,,,,, anyway

the phone not starting and still the SE Logo on screen ((more than 8 hours))
the phone not open Xrecovery screen when press back button
i tried SEUS ((Sony Ericsson Update Service)) but it still not working,,,, they say:

no new software is available for your phone
your phone already has the latest available software installed

so i tried SE Pc Companion ,,,, but the phone not connected??????

I know its Bad Luck to be my phone freezed ,,,, but i wish had some

Help

saalaaam

__________________________________________________ _________________________________________
The Thread Has been edited after problem fixed ,,,, and the solution as follow:
__________________________________________________ _____________________________________
__________________________________________________ _____________________________________

Finally found the solution as follow:

First Download the flashtool-0.6.9.1-windows and install it

Second Open Flash Tool.exe

Third open the firmwares on the flashTool Directory “”Default Directory is: C:\Flashtool\firmwares”” && Drag the x10 mini_2.3_SE.ftf into flashTool window it will flash the .sin files on the phone

Forth restart your mobile ,,,,, First startup will take about 2-4 minutes
Enjoooooy

For more information Visit this Thread

[25NOV][FLASHTOOL GUIDE] HOW TO for n00bies - G-FACE GUIDE

And This Thread
How To Flash Custom ROM In Sony Ericsson Xperia X10 Using FlashTool

__________________________________________________ _____________________________________
__________________________________________________ _____________________________________

Many Thanks For everyone

Hello, have you follow all instructions before installing Gingerbread? What is the version of gingerbread you have installed? You have before installing it unlock bootloader (you can't see Sony Ericsson Logo after unlocked bootloader), or, if you have downloaded a version wich goes with stock kernel, you haven't installed x-recovery first. Try to unlock your bootloader and read all instructions mentionned at the first page of the page you have donwloaded the rom.

Sorry for english.

Also to get back to 2.1 you must choose repair in SEUS or it won't do it

Sent from my U20i using xda premium

have you follow all instructions before installing Gingerbread

i forget to do a factory reset & install clock world mod

What is the version of gingerbread you have installed

the rom thread [ROM] MiniCM7-2.1.9 [11/2/12]Gingerbread 2.3.7/CM7.2 unofficial port for the x10mini

Try to unlock your bootloader and read all instructions mentionned at the first page of the page you have donwloaded the rom.

my problem with the original thread that my English is weak ,,,, so i try un translated thread into Arabic Language ,,,, but that Arabic Thread seems to incomplete

So if there is a Simple solution ,,,,I will be grateful to you

Also to get back to 2.1 you must choose repair in SEUS or it won't do it

I tried SEUS and it does not give me this option "repair" ,,,, just Asks me to turn off the device ,,,, then press Back Key ,,,,, then connect My mobile to PC ,,,, and after a few seconds ,,,,, SEUS says

no new software is available for your phone
your phone already has the latest available software installed




Thank you very much for your participation to me


NoTiCe === I tried a WotanClient.exe to fix phone but it needs a credit Card to continue


شكرا جزيلا لكل مشاركة ولكل مساعدة ,,,,,,

My suggestion is : flash stock rom with flashtool. You can find somewhere stock rom file around. That is what I do on x10mp when i was got freeze at SE logo.

Sent from my U20i using xda premium

or...did you try this mode?:

1-unplug USB, turn on Companion, select Support Zone, select start, select update software, select repair the phone, select E10i=X10 mini (or your device).
2-Plug USB your bricked phone, and press three buttons at once and hold it: Power+Home+Back, when you note a little vibration (the phone begin to restart), inmediatly release Power+Home buttons but let pressed Back button...

You see Companion will detect correctly your phone in flash mode and you back to stock firm+kernel.

...And a very good quide for root, unlock bootlader safely...etc is the Flastool guide :

http://forum.xda-developers.com/showthread.php?t=928343

I hope you understand my english and I helped you.

Fixed Problem .,,,,, thanks For every post

---

flash stock rom with flashtool. You can find somewhere stock rom file around. That is what I do on x10mp when i was got freeze at SE logo.

many Thanks For your advice

or...did you try this mode?:

1-unplug USB, turn on Companion, select Support Zone, select start, select update software, select repair the phone, select E10i=X10 mini (or your device).
2-Plug USB your bricked phone, and press three buttons at once and hold it: Power+Home+Back, when you note a little vibration (the phone begin to restart), inmediatly release Power+Home buttons but let pressed Back button...

You see Companion will detect correctly your phone in flash mode and you back to stock firm+kernel.

unfortunately it is not work with my Phone ,,,,,,

Many Thanks for replay


__________________________________________________ _____________________________________
__________________________________________________ _____________________________________

Finally found the solution as follow:

First Download the flashtool-0.6.9.1-windows and install it

Second Open Flash Tool.exe

Third open the firmwares on the flashTool Directory “”Default Directory is: C:\Flashtool\firmwares”” && Drag the x10 mini_2.3_SE.ftf into flashTool window it will flash the .sin files on the phone

Forth restart your mobile ,,,,, First startup will take about 2-4 minutes
Enjoooooy

For more information Visit this Thread

[25NOV][FLASHTOOL GUIDE] HOW TO for n00bies - G-FACE GUIDE

And This Thread
How To Flash Custom ROM In Sony Ericsson Xperia X10 Using FlashTool

__________________________________________________ _____________________________________
__________________________________________________ _____________________________________

Thanks For Every one Helped Me ,,,,,, and sory for my bad english

سلاااااااااام للجميع