[ROM][Pre-Pre-ALPHA] Droid A855 ICS Build Attempt

new build: http://www.mediafire.com/file/guo6leourklgzgq/cm-9-20120703-UNOFFICIAL-sholes.zip
gapps: http://www.mediafire.com/?ax46kp0yrl85ynn
___________
Don't flash any other kernels. they won't work.

changes:
hexed defy camera libs
HD profile 854x480 green lines in gallery, plays fine on pc
SD profile 640x480, plays fine via gallery
* camera saving null jpegs fixed
* camcorder working
* enabled TLS register user in kernel and userspace
* enabled 1% battery charge display
* lid switch reporting fixed again (haha)
* updated wifi drivers and firmware
* usb storage and adb work
* probably something i forgot
compiled kernel with gcc4.5, userland with linaro gcc 4.7 and -O3

still broken:
camera flash
gps (it was working before. RDS_SOCKET permission issue??)
speakerphone and bluetooth mic routing
HW decode
native tethering


if you like my works, feel free to buy me a beer

http://www.mediafire.com/file/sndcftxoq9g51gd/cm-9-20120712-UNOFFICIAL-sholes.zip
http://www.mediafire.com/file/uuhjaczqiqudqll/deprimed_160mhz.zip
http://www.mediafire.com/file/um9adenv025ip5d/deprimed_180mhz.zip
http://www.mediafire.com/file/k7agmab0uvuf274/deprimed_200mhz.zip

build default is core @ 180 (sgx @ 120)

3 kernels:
core 160 hi 80 low sgx 107/53 ~ stockish speeds
core 180 hi 90 low sgx 120/60 ~ moderate performance increase, good batt life
core 200 hi 90 low sgx 133/60 ~ "battery waster" fast! definitely wont work on all phones. it works on my droid built 9/11/2010, but the other one built 7/19/2011 doesn't.

other changes:
touchscreen? idr if that was in 7/3 build
camera stuff
sw dec
added a few missing bluetooth files
not really much else

overclock breaks camera, backported milestone mt9p012, hp3a, and isp drivers
this fixed camera and camcorder with sgx overclock, and i'm getting higher fps while recording
was 15 , now 20 to 24.
isp now uses an additional 6mb of ram, but i think it's a good tradeoff.
true 720p recording may be possible now

Edit: still freezes... hmm.

Edit:
odexed build is still unstable, it locks up occasionally when the phone goes to sleep, and usually doesn't come back.
no errors in logs, nothing i can check looks out of the ordinary, happens with and without gapps, completely mystifying.

today i ws able to hack in the defy qtouch-obp-ts drivers and enable 5 point multitouch
the new drivers came with new firmware. previously ver 19, new ver 22.
this actually got flashed to the touchscreen controller, it's a one way process, unless someone can dump v19 from their phone.. but
the new ver is compatible with old kernels too, so i don't think it's a big deal.
i also modified the way the driver reports touch events based on moto stingray qtouch driver
this is compatible with ics and jb without hacks.

ics progress: testing an odexed build. it's 20mb larger, but uses 20mb less ram and it's fast! now half of system/app lives on /data
jb: boots. touchscreen is ... weird. no radio audio sensors lights anything really.

figured it out well maybe i don't quite understand it, but it works
problem was in sram34x.S
apparently newer kernels don't modify sdram AC timings because sram code can't guarantee no one is using sram when the clock change occurs, which causes random crashes, or in our case, no boot.
i've also rebased my kernel on deprimed and so far all is good.
still need to test battery life, it's probaly worse, but better than previously posted builds
screen off: ram @ 80Mhz sgx at 53Mhz
screen on: ram @ 200Mhz sgx @ 133Mhz
Edit2 warning was caused by dsp opp2 not being able to be set
dropped dsp opp2 to 160.