[DEV] CM11 Work-In-Progress

Search This thread

sednafx

Senior Member
Aug 11, 2011
359
127
Jacksonville
Nope. Working fine at home on WPA2 and tether WPA to my phone. I thought there was a problem before I realized I was typing in the wrong wireless pw 5 times :rolleyes:

The thread exploded quite a bit, I have a feeling fattire will regret releasing that zip. :p

I wonder what I did wrong. I know I am typing the key in correctly.

Update: Tried toggling wifi on and off, same goes for airplane mode. No go. I have a D-Link DIR-655. My wifi works fine in CM7.
 
Last edited:

michaeljr10wv

Senior Member
May 19, 2009
77
13
OK, installed to a SD to test. I can't seem to get gapps flashed. I have CM7 installed internally.

Any ideas?

Mike
 

gambit07

Senior Member
Nov 18, 2007
439
80
Is anyone having wifi issues with wpa2? I was able to connect when I turned encryption off. I wiped everything except sdcard. Thanks.

Sent from my PC36100 using Tapatalk

Nope, I actually had problems with cm7 recognizing my connection with wpa but everything has been good so far on ics
 

dreamhunterr

Senior Member
May 14, 2008
87
17
Coimbra
fattire,

I was wondering if there was any interest in starting to report bugs, even if minor ones.

I think it'd be nice to document even minor bugs so eventually someone can fix them.

I don't exactly where to report them. if on the issue tracker of your github or in the CyanogenMOD bugtracker because some might not be device specific.
 

Homer_S_xda

Senior Member
Dec 5, 2010
427
61
OK, installed to a SD to test. I can't seem to get gapps flashed. I have CM7 installed internally.

Any ideas?

Mike
I had the same issue. If you are using Verygreen's 1.3, it is expecting gapps to be have "gb" in the zip file name. Fake it out by changing "ics" to "gb" in the file name. Then boot to SDcard recovery using the boot menu.

Seems to have worked for me...

Update... spoke too soon, "Nfc Service has stopped" loop. Have to look up the fix for that one.

Homer
 

fattire

Inactive Recognized Developer
Oct 11, 2010
2,281
6,473
www.eff.org
fattire,

I was wondering if there was any interest in starting to report bugs, even if minor ones.

I think it'd be nice to document even minor bugs so eventually someone can fix them.

I don't exactly where to report them. if on the issue tracker of your github or in the CyanogenMOD bugtracker because some might not be device specific.

Here's how to report a bug at this point:

"Hey everyone. I just wanted to report that I fixed a bug. [DESCRIPTION OF FIXED BUG GOES HERE] You're welcome!"
 

joenathane

Senior Member
Oct 19, 2010
1,332
537
Phoenix
ICS feels like a different OS, almost like moving from Windows to a Macintosh, it'll take a bit to get used to. Also I'm finding the menu button being on the upper right of apps weird, the UI feels a bit split. Overall I'm glad this is turning into more of a proper tablet, especially multi-pane apps.

I was having issues getting gapps to work correctly, I wiped data and cache several times and tried both the 20111124 and 20111125 gapps for ICS and the wizard would keep crashing after connecting to wifi. I finally wiped everything, system, boot, data, cache, reflashed and that finally did the trick. Just thought I share in case anyone else experiences something similar.
 

Dj-Gutz

Senior Member
Sep 1, 2010
198
83
Tel Aviv
Finally got around to flash it :) Amazing work so far! and now endless fun :D

here is the gapps I used ( credits : defy ics thread ) , flashed immediately after flashing the rom
http://download.clockworkmod.com/test/gapps-20111128.zip

  • Market , Calendar Sync ( with Hebrew & RTL support :) ) , Gmail - All good
  • Youtube - Non-HQ Works ( not smooth ) , HQ causes FC - Is there a way to configure it to non-hd on start?
  • Browser bookmark sync doesn't work
  • Usb host - WORKS! ( but still a little goofy with external power , I think we need to automate the external vbus option )
  • Audio doesn't work , not news there , But I thought I could get around that with a USB DAC - Couldn't :\

That's It for now I think :)
Man , I LOVE ICS!

---------- Post added at 07:21 AM ---------- Previous post was at 07:15 AM ----------

I wonder what I did wrong. I know I am typing the key in correctly.

Update: Tried toggling wifi on and off, same goes for airplane mode. No go. I have a D-Link DIR-655. My wifi works fine in CM7.

Using DIR-615 ( with DD-WRT ) & WPA2 - working right out of the box

have you checked your mac filtering maybe? I'm not using it..
 
  • Like
Reactions: marlonbr

marlonbr

Senior Member
Jun 14, 2010
66
9
HOLY ****!

You guys can't imagine how you made me happy with this build! My Nook was never this good before!

THANK YOOOOOOOOOOOUUUUUUUUUUUUUUUUUU!
 

Dj-Gutz

Senior Member
Sep 1, 2010
198
83
Tel Aviv
Is anyone else have issues with charging?

Using OEM Charger & OEM Cable - Doesn't recognize charge ( green led ) unless it's plugged before system loading ( but then it's stuck on "Charging" )
Using OEM Charger & Regular Cable - Works fine ( and also that's the only way to free it from the "charging" status after booting with the oem cable )
 

zorvalth

Senior Member
Sep 7, 2008
102
9
Sofia
I just wanted to share that i installed the new ADW Launcher EX which is on sale right now for 10 cents and it perform incredibly smooth. There is a nice dock and there is all ics features like drag and drop folders.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 210
    This thread is meant for discussion of the in progress Kit Kat port for the Nook Color.

    Updates
    If you want updates on the progress you can check this post and fattire's post immediately folllowing this. We'll both be posting updates periodically here.

    You can also follow me on twitter @dalingrin
    You can follow fattire @ fat__tire
    Please don't ask me for ETAs or status updates. I will post them as I post them :cool:

    Source code
    Device source code will be temporarily hosted on fattire's github @ http://github.com/fat-tire/android_device_bn_encore

    Things to expect
    Nothing :eek:

    Things not to expect(for now)
    *Fully accelerated composition of the UI - this is not likely and may be dependent on 3rd party closed source EGL libs getting updated
    *Accelerated video playback and overlay - This has changed quite a bit and may take some time to get working
    *Polished release soon - Don't ask, don't tell​


    icsncwifi3.jpg

    icsncwifi2.jpg
    160
    UPDATE 11/24/13 -- So CM 11.0 is out and building nicely on Nook Color. Look here for the link to the build instructions. If you are building CM 11, you will probably want to use cm-11.0 as the name of the branch when initializing.



    STATE OF THE UM, STATE OF THINGS


    So I was curious how many noob types, who always beg for nightlies and builds and stuff-- I wondered if they (you?) could be encouraged to learn and get involved in the process of building Android. Which, as I've expressed in an infamous ramble, I think is important to the future of our culture and how it it deals with technology-- and who will control it. So I asked normal non-dev people to try building-- to give it a shot.

    I think the experiment, which quickly became OUR experiment, has been a massive success. Far beyond what I'd imagined. Hundreds of people have gotten off their asses-- many of whom had clearly never touched Linux or a compiler before, and most were successful in building CM9/ICS from scratch.

    That is not a small deal. And no, it's not just following a list of instructions by rote. People had to think about and solve a million different problems-- installing VMs, updating packages, choosing linux distributions, understanding the command line, etc. Scary stuff if you've never done any of these things before.

    So it's been a month or so now, and I think we've reached the stage where aside from minor enhancements and fixes, the build looks pretty sweet. The major stuff is there and working. Yeah, DSP/hardware-accelerated video is something we're going to have to wait for TI to add to their omap3 repositories, and there are likely other things wrong. I've heard rumors of sleep-of-deaths or quicker-than-usual battery consumption, etc. There are numerous things to be fixed, but these are all issues that may or may not be worked out over time... As major new enhancements come to the CyanogenMod project, they will come to the encore version, and your build, automatically.

    No secret links this time. As before, I'll spell out the bottom line explicitly for ya here in the middle somewhere. And I'll even underline it.

    I hereby decree, in so far I am able, my humble request for "no posted builds".... is ended.

    Back to your regularly scheduled forum. Go to it.

    I encourage you to pass any valuable improvements you make to the code "upstream" via the gerrit review system at review.cyanogenmod.com for inclusion in the main CM project. You already know how it works. And some, God love ya, have already started. Not everything you submit will get accepted, but it's a good way to "pay it forward". And in the same vein, consider helping someone on IRC. Or be a big brother or big sister. Or donate blood. And to quote Steven Soderbergh, or whomever, you don't have to brush ALL your teeth, just the ones you want to keep.

    Thanks as always to dalingrin, keyodi, nemith, verygreen, arcee, deeper-blue, unforgiven512, the gang on irc, and the CM Team generally for keeping this fun. And thank YOU for the lulz, Internet.

    ft

    Remember, there's NOTHING quite like running your own build, piping-hot, and fresh from the oven.



    ----

    I am also releasing a first pass at a how-to-build walkthrough. It is available here:

    walkthru (rough draft)

    This doc will be updated and evolve with your input. It is meant to help people feel confident that they can build an operating system from scratch, and hopefully encourage them to participate, learn, and even make contributions.

    If you need assistance, you must rely on each other.

    Here is an equally unreliable clockworkmod, v5.5.0.4:

    uRecRam

    You may be asking, where is the issue queue? There is no issue queue. You are on your own here.

    Recent automated builds (unofficial, unsanctioned, untested, uneverything else) from Forum member Samiam303 is here.

    -----------everything below this line is sorta old and outdated--------------

    So there's apparently been some bit of controversy related to my request that people try to build themselves rather than someone posting a pre-made update.zip file. Let me go more into detail about what this experiment is about, at least from my perspective. But first, I do want to thank everyone for respecting the request so far-- I know it's not the traditional way of doing things, but I think it's been very fruitful and personally rewarding to see so many people who have never built jack before take on a project like this and be successful. I've received an enormous number of messages, both PMs here as well as in IRC, to the effect that this finally got them to try to build for the first time. It's introduced many people to actually using Linux, others may be having their first encounters with the command line, or git, or looking at source code, or learning about the build process in general. Whether or not the majority go on to become "devs" is irrelevant-- what I have been trying to encourage is curiosity and experimentation, and most of all a deeper understanding that your phones and "ereaders" are in fact full-fledged computers, not "appliances" or limited-purpose devices that others get to control. It's your property, and it can do a lot. There is an effort underway to discourage people from thinking of their devices this way or discouraging them from experimenting and learning with them. This IMO is an extremely harmful practice-- take a look at Cory Doctorow's recent speech on this subject. I could go on and on, but it seems important enough to me to make this request, and hopefully some of you are even subconsciously appreciating the awesomeness of what potential these general-purpose gadgets will have on society. So that's a lot of philosophizing, but there you go. And while I'm not naive enough to think that plenty of people aren't trading the file "under the table" at it were, for a variety of reasons, I do think that in a way they're cheating themselves; those who give building a shot are finding that learning is a reward unto itself. Those who are persistent, who pay attention, who don't give up, not only get a build at the end, plus the experience of doing it, plus the knowledge they picked up along the way-- they also discover things in the most unexpected of places, as in the link in the period at the end of the third sentence in this post. And while there's been some discussion of what a "dev" is and whether or not this is a gateway to bigger and better things, all I can assume is that if 5-10% of the people who built are intrigued enough to take it a step further, and maybe a step further than that... then we might end up with some new devs who appreciate the value of open source and whose contributions we can look forward to with eagerness in the future. Plus-- it's more fun this way.

    I do hope this sounds good to everyone. If you understand what this post is about- no need for long, drawn-out elaborate responses... a simple "I got it" will do. ;)

    More source is forthcoming... Thanks to dalingrin, arcee, keyodi, nemith, Scepterr, unforgiven512, etc. Oh, and shh.

    --------------------------

    update-cm-9.0-0-encore-emmc-sneakpeek2-fullofbugs.zip
    md5: 536d589c59ea5711a17a3d976f0638fa


    update-cm-9.0-0-encore-emmc-sneakpeek1-fullofbugs.zip
    md5: 85294ad91e2601beb737cf723b9fb9d6
    (note this URL is likely to change)

    Note: You are advised NOT to try to install this. This update.zip will **overwrite** as in erase whatever data you have on your emmc, so if you are trying this, you are advised to back it up first so you can recover. Install entirely at your own risk, and do a factory wipe first. This software is likely to be terrible and cause problems including permanent data loss, hair loss, and/or the destruction of your property and the death of your pets. You assume all risks involved in your use-- or even attempted use-- of this file. I disclaim any and all responsibility for your decision to try it.

    *** Really. This build is buggy. It is a work-in-progress. It is only a snapshot of where things stand right now, and it's possible it'll never go further. ***

    here's what's working:

    * bluetooth (pairing/file transfer only confirmed)
    * wifi (full it seems but it's brand-new to the kernel so who knows how stable anything is)
    * backlight
    * accelerometer
    * improved stability (but not perfect)
    * gapps
    * setcpu/overclock
    * real data usage info (not stubbed out)
    * battery levels/charging
    * physical menu button
    * touchscreen
    * 3d games
    * usb gadget in kernel (ie, mounting your sdcard to your computer)
    * screenshots
    * build system (to auto-create update.zips)
    * sound


    (note: for all the above features, you must build yourself! See below for rationale & more)

    For sure not working yet:

    * video
    * full 2d acceleration (esp on complex web pages)
    * and much much more

    These things may/may not be added at some point in the future. You should have no expectations that they will. Anyone who asks for an ETA for something or other gets collectively stoned by the crowd.

    I'm sometimes on #nookcolor in freenode.

    Thanks to keyodi, unforgiven512, arcee, toastfch, d0nk`, dalingrin, nemith, the rest of the cm team/TD, and anyone else who I've forgotten. We stand on the shoulders of giants.

    MUST READ:
    Again, don't install this. And please don't "rom" this (as in change the font or background) and then ask for donations for your "hard work". This is a preview of a work in progress, not a final product, and it's not meant for people to use day-to-day. Don't be a ****. Thanks.
    --------------------screenshots---------------------

    ncicsss1.png


    About screen, wifi scanning, & bluetooth....
    icsnc.jpg
    icsncwifi1.jpg
    icsncbt.jpg


    icsnc4.jpg
    ncicsss.png
    icsnc5.jpg
    icsnc6.jpg

    ncicsss2.png
    ncicsss5.png

    wpvW3.png
    71
    Some thoughts...

    So there's apparently been some bit of controversy related to my request that people try to build themselves rather than someone posting a pre-made update.zip file. Let me go more into detail about what this experiment is about, at least from my perspective. But first, I do want to thank everyone for respecting the request so far-- I know it's not the traditional way of doing things, but I think it's been very fruitful and personally rewarding to see so many people who have never built jack before take on a project like this and be successful. I've received an enormous number of messages, both PMs here as well as in IRC, to the effect that this finally got them to try to build for the first time. It's introduced many people to actually using Linux, others may be having their first encounters with the command line, or git, or looking at source code, or learning about the build process in general. Whether or not the majority go on to become "devs" is irrelevant-- what I have been trying to encourage is curiosity and experimentation, and most of all a deeper understanding that your phones and "ereaders" are in fact full-fledged computers, not "appliances" or limited-purpose devices that others get to control. It's your property, and it can do a lot. There is an effort underway to discourage people from thinking of their devices this way or discouraging them from experimenting and learning with them. This IMO is an extremely harmful practice-- take a look at Cory Doctorow's recent speech on this subject. I could go on and on, but it seems important enough to me to make this request, and hopefully some of you are even subconsciously appreciating the awesomeness of what potential these general-purpose gadgets will have on society. So that's a lot of philosophizing, but there you go. And while I'm not naive enough to think that plenty of people aren't trading the file "under the table" at it were, for a variety of reasons, I do think that in a way they're cheating themselves; those who give building a shot are finding that learning is a reward unto itself. Those who are persistent, who pay attention, who don't give up, not only get a build at the end, plus the experience of doing it, plus the knowledge they picked up along the way-- they also discover things in the most unexpected of places, as in the link in the period at the end of the third sentence in this post. And while there's been some discussion of what a "dev" is and whether or not this is a gateway to bigger and better things, all I can assume is that if 5-10% of the people who built are intrigued enough to take it a step further, and maybe a step further than that... then we might end up with some new devs who appreciate the value of open source and whose contributions we can look forward to with eagerness in the future. Plus-- it's more fun this way.

    I do hope this sounds good to everyone. If you understand what this post is about- no need for long, drawn-out elaborate responses... a simple "I got it" will do. ;)

    More source is forthcoming... Thanks to dalingrin, arcee, keyodi, nemith, Scepterr, unforgiven512, etc. Oh, and shh.
    59
    Some good stuff...

    fattire/dalingrin: aren't the new EGL libs from the defy very good news?

    Not especially. We've had egl working on nook for about two weeks now. It just hasn't been public. The changes are pushed to frameworks/base now, and the defy is just using the flag(s). The code in questoin, by arcee I believe, was pushed up yesterday, which means everyone else will get the fast blue stuff seen in the screenshots. I tested it and some other stability stuff today, and I'm pushing it tonight/this morning. Anyone building now should notice a difference. The sacrifice for stability is a loss of some accelerated 2d graphics... but trust me, this is the best combo so far, and that other stuff can come later.

    The big effort the last two days has been w/the kernel. After MANY hours of f'ing up, I finally got the appropriate netfilter working in 2.6.32 which means I can finally finish stuff like this:

    icsnc11.jpg


    That's a 1543 fwiw. I'm guessing it can do better. But whatever.

    Gapps works too. Like Maps...

    icsnc12.jpg


    Gmail (with multiple panes/fragments)...

    icsnc7.jpg


    Market...

    icsnc10.jpg


    And the tablet apps install directly to the tablet from the web market. No questions or difficulty...

    icsnc8.jpg


    icsnc9.jpg



    Neat. So here's what's working:

    * bluetooth (only pairing is confirmed)
    * wifi (full it seems but it's brand-new to the kernel so who knows how stable anything is)
    * backlight
    * accelerometer
    * improved stability (but not perfect)
    * gapps
    * setcpu/overclock
    * real data usage info (not stubbed out)
    * battery levels/charging
    * physical menu button


    Not working yet:

    * sound (dalingrin's gonna start this I think. Arcee has code to support legacy drivers I believe.)
    * video
    * full 2d acceleration (esp on complex web pages)
    * usb gadget (which means screenshots too I think)
    * build system (to auto-create upgrade.zips)

    I'm pushing up most of what I have at the moment, including the test kernel-- I'll try to check that in tomorrow but it's a mess. It's been an all-night effort, so I'm sure stuff that I think works great will turn out to be a total dud when people actually try it.

    I also wrote up a "how to build" walk-thru a couple days ago. But it'll need to be updated.

    Still, not bad.
    56
    New Kernel

    Well, we decided to push the 2.6.32.59 kernel and wifi module into the repo. So, eyeballer's and Samiam303's builds should have the latest kernel by tomorrow.

    What's Fixed
    • keyboard layout issues and key sizes
    • Wifi module preventing sleep and pinning cpu at max
    • wifi SOD - we'll see

    What's New
    • PVR drivers backported from the omap3-3 kernel. *non-opengl versions may notice increased 3d scores in benchmarking. No noticeable improvement in opengl builds