* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
PhilZ Touch 3.0 Recovery
(Clockworkmod v6.0.1.5 based recovery)
Galaxy S2 - i9100 Version Only
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
PhilZ Touch 3.0 Recovery
(Clockworkmod v6.0.1.5 based recovery)
Galaxy S2 - i9100 Version Only
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
This is the temporary version of my custom clockworkmod recovery
For permanent one, look here
WARNING: flashing some update.zip files with format commands
can still brick your phone until you use a safe kernel, like PhilZ-cwm6.
New in v3.00
Completely revised new touch code
Much more user friendly touch experience
Lots of new features
Video Teaser:
Main menu at height setting 5 and 1
PhilZ Settings menu
Backup / Restore EFS and kernel
GUI Touch Settings
Aroma File Manager
Source code
coming soon...
Read in my kernel thread post 2 for instructions to use PhilZ Touch features like aroma and ors support[/SIZE][/B]
- PhilZ Touch 3.0 recovery (clockworkmod v6.0.1.5 based):
- touch interface: toggle 3 touch modes: FULL TOUCH, DOUBLE TAP to validate and SEMI TOUCH (scroll but no touch validation)
[*]new touch code completely revised compared to v2.x and older
[*]much more stable full touch mode: no more skips, jumps or wrongly validations while scrolling
[*]when you set full touch mode, it defaults to optimized settings for menu height and touch sensitivity (you still can alter them manually later)
[*]adjust scrolling touch sensitivity in 6 settings
[*]adjust menu height in 6 settings
[*]toggle vibrator on/off when using bottom virtual buttons
[*]toggle key repeat for volume up/down scrolling when maintained pressed: needs recovery restart to take effect
[*]backup/restore EFS and Kernel
[*]browse phone with root access using full GUI in Aroma File Manager: default location or browse for path
[*]support openrecovery script in 3 modes using a smart one touch menu: goomanager, default custom scripts location, browse for script
[*]mount internal and external sdcards on PC in recovery
[*]poweroff, reboot to recovery and reboot to download mode options
[*]Can be flashed in Stock Recovery
[*]Dual USB mount in recovery support (needs fixed kernel like PhilZ-cwm6)
[*]ADB root in recovery: just wait about a minute to activate
Why a temporary recovery?
- Wipe safely on a stock kernel
- Will work on any i9100 phone with ICS, even stock non rooted
- No PC needed, only and android device and the zip files that you download to your sd card
- Fully reversible after reboot
- No Yellow Triangle and No custom counter increased
- Incremental Backups to save a lot of space and time (CWM6)
- Much better user interface, bigger menus, smoother scroll, safer touch, works with both touch and keys
Flashing instructions for stock recovery
- Download philz-touch_x.xx_i9100-signed.zip, the last philz touch cwm v6.x for i9100 Galaxy S2. This version works with touch AND with keys to scroll in menus
- Put the previously downloaded philz-touch_x.xx_i9100-signed.zip file on your external sd card
- Boot into stock recovery (volume up+home+power), and select "apply update from external storage". Now select the philz-touch_x.xx_i9100-signed.zip file you copied in previous step
- You get CWM recovery interface (this custom recovery is temporary, not permanent)
You are done
If it fails with black screen after successful flash:
read about it here: http://xdaforums.com/showpost.php?p=32785650&postcount=33
It is because their recovery is not automatically restarted once killed
You can manually edit the file /sbin/killrecovery.sh in the temporary recovery zip package and modify it by adding the extra 2 lines before the #...
(make sure you edit it in something like notepad++ with EOL conversion set to unix)
so that it looks like below:
Code:kill $(ps | grep /sbin/adbd) kill $(ps | grep /sbin/recovery) /sbin/recovery & exit 1
Save the zip and try it again
Change log
15 nov 2012:Update to new custom touch 3.00 recovery included in PhilZ-cwm6 kernel
Read full change log in kernel thread
08 oct 2012:Update to new custom touch recovery included in PhilZ-cwm6 kernel
- Wipe safely on a stock kernel, flash even update.zip files with format commands (patched update-binary)
- now using CWM6 based custom touch recovery 6.0.1.4 (internal build 1.15) * Siyah source code *
- DUAL USB MOUNT in recovery is now supported * Special thanks to Gokhanmoral@Siyah *
- semi-touch interface with right slide to select disabled for safety: use slide up/down and left for back
- include bottom virtual buttons for easier navigation
- revised GUI with bigger fonts and larger menus for better readability
- transparency effects in recovery menus
- fixed backup format selection menu in original Koush cwm6 (was echoing previous menu)
- added power off and reboot to download mode options in recovery menus
- battery % level displayed in recovery
- fixed some menus spelling and aspect in original recovery
20 Sep 2012: Update non touch version to 6.0.1.4 ** Recommanded Update from previous 6.0.1.4 attached here **
- Now, CWM6 is built from source to fix possible issues related to previous dynamically linked binary
Big big thanks to Tallustus from Team SkyFire for the support
19 Sep 2012: Update non touch version to 6.0.1.4
Touch version stays at 6.0.1.2: if you know about a kernel with touch 6.0.1.4 or source changes for touch cwm6, let me know please
17 Sep 2012: Update non touch version to 6.0.1.3
Touch version stays at 6.0.1.2: if you know about a kernel with touch 6.0.1.3 or source changes for touch cwm6, let me know please
28 Aug 2012: Update to 6.0.1.2 - Touch (ICS only) and non touch versions
Credits
- Chenglu for his great unpack / repack tool: MAJOR CREDITS
- kbc-developers for the base semi-touch code :good:
- Gokhanmoral@Siyah for his touch source and great support over PM in fixing dual USB mount: MAJOR CREDITS
- Tallustus from Team Skyfire for his great support over IRC: MAJOR CREDITS
- sk8erwitskil for his recovery source (ors support, aroma file manager and efs backup/restore), a great place to start learning: MAJOR CREDITS
- shoe63 for his testing and great help in porting to the N7000 Big thanks
- dr.ketan for his precious help in porting to the N7000 (I don't own one), for support in the thread and for his faster mirrors: Big thanks
- utkanos for his great and kind support over IRC
- gweedo767 @ #Koush for sharing his new touch code source (not yet used)
- myfluxi for his xxRecovery source in fixing dual usb mount
- Koush for his great work on CWM6 and CM
- Cyanogenmod for their scripts / initramfs
- Chainfire for his support (stock recovery flash) and all his work for the Android community
- superatmos and Dharam_Maniar for their great guides on unpacking/building custom kernels
Attachments
-
cwm-touch-6.0.1.1-i9100.zip1.8 MB · Views: 14,047
-
cwm-touch-6.0.1.2-i9100.zip1.8 MB · Views: 12,470
-
cwm-notouch-6.0.1.2-i9100.zip1.8 MB · Views: 2,260
-
cwm-non-touch-6.0.1.4-i9100.zip1.8 MB · Views: 4,457
-
cwm-6.0.1.4-PhilZ-1.15-i9100.zip1.9 MB · Views: 3,153
-
cwm-6.0.1.4-PhilZ-1.86B-i9100-signed.zip1.9 MB · Views: 4,268
-
cwm-non-touch-6.0.1.5-i9100-signed.zip1.8 MB · Views: 6,620
-
philz-touch_3.00_i9100-signed.zip1.9 MB · Views: 52,480
Last edited: