[How To] Flashing | Official ROMs | Custom ROMs

Search This thread

Antanico

Member
Oct 24, 2008
13
0
Amazon Kindle Fire
Smart Watches
Eclair to Froyo

Yes, You can flash directly from Eclair to the latest firmware available for the area that you are interested in.
Flash latest stock firmware from your region via odin and you should be fine just remember to have a fully charged battery and good luck!
 

dzatara

Senior Member
May 30, 2010
163
10
wow
I have met several time in this thread words like "pray" and "luck" ...
So there is some relatively high possibility to brick the device?
 
Last edited:

frosty68

Senior Member
Jul 23, 2011
242
32
Can anyone help? I'm trying to get a2sd to work under the cm7 Rom, card has a 1gb ex3 partition created using 4ext recovery, but nothing seems to see it?

Sent from my HTC Desire using Tapatalk 2
 

culkaran

Senior Member
May 18, 2011
55
2
Try s2e if you are on cm7. Install go to setting tick the first option, then tick all the options on the s2e home screen except cache download. Reboot. Done.

Sent from my GT-I5500 using Tapatalk 2
 

frosty68

Senior Member
Jul 23, 2011
242
32
I tried, all the options are greyed out. App2sd gui might have that slightly wrong, I'm on another phone) confess up with an immediate error that either the phone isn't rooted (it is, and I installed root checker to confirm) or there's no ext3 partition, which I created on my HTC desire exactly the same as the one I'm using here.
Gonna try again installing the Rom on a clean, partitioned card

Sent from my HTC Desire using Tapatalk 2
 

culkaran

Senior Member
May 18, 2011
55
2
Format the card and create ext partition again using cwm. If that doesn't help flash the rom one more time.

Sent from my GT-I5500 using Tapatalk 2
 
  • Like
Reactions: frosty68

sankarth

Senior Member
Jul 26, 2011
213
42
coimbatore
gt-i5503

Hey guys with Phones of model I5503. I had previously upgraded to 2.2 but had a battery issue. So I degraded to 2.1 again.

But now I have found the solution for Battery Drain Problem. Try these steps and see if it works.

1. Before flashing your phone remove your SIM card and SD card (Memory Card) from your phone.
2. Flash your phone
3. Do a Hard Reset to your phone as per the 1st Post in this Forum
4. After the Hard Reset. Insert your SIM and SD card.

Try all and see if it works.

I am from India.
Samsung Galaxy I5503 Froyo 2.2
with no Battery Issue.


me too from india...whcih firmware u used to get froyo 2.2....can pls give me the link
 

Antanico

Member
Oct 24, 2008
13
0
Amazon Kindle Fire
Smart Watches
Last edited:

Topoignaz

New member
Nov 21, 2013
3
1
Hotfile.com not working

Links on Hotfile.com don't work because the site has been shut down. I've been looking for Madteam roms alternative download links for hours to no purpose. Can anyone provide any alternative download link or rom .zip filenames?

Many thanks.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 14
    Samsung-i5500-Galaxy-5-India-Android.jpg

    How to ROOT?
    Use Universal AndRoot, its so easy

    Latest Firmware
    I5500LUYJPL Android 2.2.1 - 2011 Jun (USA)
    I5503DXJP8 Android 2.2 - 2011 Jun (Asia)
    I5500XFJPQ Android 2.2 - 2011 May (Europe)
    I5500XWJPJ Android 2.2 - 2011 May (Europe)
    I5500XWJPL Android 2.2 - 2011 April (Europe)
    I5508ZCKP2 Android 2.2 - 2011 January (Asia)
    I5500XWJP9 Android 2.2 - 2011 January (Europe)
    I5500LUYJP2 Android 2.2 - Froyo (USA)
    I5508ZNJP3 Android 2.2 - Froyo (Asia)
    I5500XWJJ6
    I5500XWJH4
    I5500XWJI1
    I5500XWJI2

    pass= samfirmware.com

    thanx to samfirmware.com

    Flashing Tool & Guide
    Odin v4.28 & Ops File

    1. Extract Odin v4.28 and Ops File.zip I5500XXXX.rar
    2. Open Odin v4.28,
    - Select OPS tab: EUROPA_I5508_v1.0.ops
    - Select BOOT tab: I5500XXXXX_BOOTLOADER.tar.md5
    - Select PHONE tab: I5500XXXXX_amss_phone_CL462398.tar.md5
    - Select PDA tab: I5500XXXXX_PDA_CL500331.tar.md5
    - Select CSC tab: I5500XXXXX_CSC_SER_CL498242.tar.md5
    - Make sure Auto Reboot & Protect OPS selected in Option tab
    *If you have 1 file is this the PDA.tar
    You can flash only the pda file.

    - Make sure One Package selected in Option tab
    3. Turn off phone, remove battery for 5second, put it back
    4. Hold "Volume Down, Center button & Power button" in the same time to enter Download Mode
    5. Connect to PC with USB cable
    6. When the data line and the phone connection is successful, com port shows yellow in Odin
    7. Press Start on Odin
    8. Waitin & Pray!
    9. PASS, its done!

    *Hard reset after flashing *2767*3855#
    *Check ur Phone Info *#*#1234#*#*


    Samsung Android Secret Code
    Code:
    *#*#4636#*#* - Phone Information
    [/URL]*2767*3855# - [B]Hard Reset[/B]
    *#*#7780#*#* - [B]Factory Reset[/B]
    *#*#7594#*#* - Change End Call/Power Option
    *#*#197328640#*#* - Service Mode
    *#*#273283*255*663282*#*#* - File Copy Screen (Backup Media Files)
    *#*#526#*#* - WLAN Test
    *#*#232338#*#* - Shows WiFi MAC address
    *#*#1472365#*#* - GPS Test
    *#*#1575#*#* - Another GPS test
    *#*#232331#*#* - Bluetooth test
    *#*#232337#*# - Shows Bluetooth device address
    *#*#8255#*#* - GTalk Service Monitor
    
    [B]Codes to launch various Factory Tests:[/B]
    
    *#*#0283#*#* - Packet Loopback
    *#*#0*#*#* - LCD test
    *#*#0673#*#* - Melody test
    *#*#0842#*#* - Device test (Vibration test and BackLight test)
    *#*#2663#*#* - Touch screen version
    *#*#2664#*#* - Touch screen test
    *#*#0588#*#* - Proximity sensor test
    *#*#3264#*#* - RAM version
    [B]
    Codes to get Firmware version information:[/B]
    
    *#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate
    *#*#1234#*#* - PDA and Phone
    *#*#1111#*#* - FTA SW Version
    *#*#2222#*#* - FTA HW Version
    *#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number
    4
    Hi everyone,

    I'm working on the GT-I5500 for about 10 days, played alot, flashed alot and i finaly got to learn how it works
    Well i have created a modified froyo version based on samsung's I5500LAR0JP2
    Basically i tweaked the initiation scripts and got the powersave gorvernor set to ondemand
    It was performance, so the cpu clock was always at max
    The battery now lasts about 3 times more according to testers and the device aparently is more stable. All the apps are the same
    Setcpu can be removed since the powersave mode is now default

    To install it, use the odin procedure as the same as the I5500LAR0JP2
    Remember to do a factory wipe after installing
    Below the file, DO NOT RENAME THE FILE TO .TAR OR ANYTHING ELSE, odin will do the checksum of the file so you know it has been downloaded correcty

    tinyurl.com/67wpzzm

    At the Lowyat forum there is all the testing and modifications
    forum.lowyat.net/topic/1687862

    You can also join the irc channel at freenode.net (webchat.freenode.net channel #gti5500)

    All kind of help is welcome

    Thanks,

    James/Motafoca
    3
    New Firmware

    New firmware!!!! on samfirmware.

    I5500XWJP9 Europe
    I5500BVJJP7 USA

    Anyone tested ?

    Update:

    Downloaded and installed the usa firmware successfully!!.......Phone starting up with GT-I5500B.......some new icons.....:

    1. News & Weather
    2. Asphalt 4: Elite Racing
    3. Energy Saver
    4. Treino Cerebral 3:
    5. Unreceived Calls
    6. Downloads

    I was not getting internet connection and saw that the APN Type has changed to Internet.......I selected Internet+MMS+DUN and it started working again.....

    Will post again.....let me test and play with it more.........