[kernel][290911] NeoBlaze Kernel for stock/MCR - Now works on Gingerbread

Search This thread
By:
Advanced…
Imperticus

Imperticus

Senior Member
Jan 27, 2011
1,184
1,243
NeoBlaze Kernel for stock/MCR
Click to expand...
Click to collapse
​

Information about kernel, really, this contains everything (almost)
This is based on the newly released LG v10e kernel sources. Now works on both Froyo and Gingerbread stock and MoDaCo based ROMs. Will not work with CyanogenMod based ROMs.
There are 2 versions now, ext3, and a separate ext4 version. Make a backup before flashing especially the ext4 version, in case if it goes wrong.

Features:
- EXT4 built in (finally)
- OC/UV support, overclocking upto 1400 mhz - use pimp-my-cpu (other apps may not work)
- SDRAM, VDE and GPU overclock
- Voodoo Sound
- BFQ I/O scheduler
- SLQB Memory Allocator
- CIFS, TUN
- few other little tweaks inc some designed to improve battery life
- new wireless.ko module

Credits
- Cpasjuste for work on oc/uv, and learnt a lot from his posts etc.
- Beene for some of the tweaks to improve battery life

INSTALLATION
- Be sure to REMOVE "boot settings" from Pimp My Cpu before installing the kernel to reset default values.
1. reboot to CWM
2. Clear cache
3. Advanced, clear Dalvik
4. install zip from SDcard
5. Reboot


DOWNLOAD
make sure you back up before installing, just incase something goes wrong..

280911 - froyo & gingerbread (doesn't change mount)
280911 - EXT4 FROYO
- Fixed bfq i/o scheduler
- stock voltage at boot (1000mV)
- halt avp when entering suspend

210911b - EXT3 (froyo & gingerbread)
210911b - EXT4 FROYO ONLY
- now works on gingerbread ROMs (thanks to koush, benee and rusty for their work on AnyKernel flasher) (also heads up to TopoGigi for first running it on 2.3)
- touchscreen tweaks, battery tweak
- fixed touchscreen bug

150911
- BFQ now default I/O scheduler
- OC/UV is back
- default clock speed 1015MHz, 950mV

130911
- Added BFQ I/O Scheduler
- Tegra2 specific compiler optimization
- Added SLQB Memory Allocator and made it default allocator
- lowmemorykiller: only check cache for thresholds (Brian Steuer)
- CIFS, TUN
120811 - normal version
120811 - lower OC values
- removed USB accessory (wasn't working properly anyway)
- enabled RNDIS
- fixed init.d permissions (hopefully will solve bootloops)
- added a version with lower oc value - upto 1200Mhz
090811
- Voodoo sound added (thanks supercurio)
070811
- change to UV/OC values
- SDRAM, VDE and GPU overclock (thanks vork and morfic)
- fix for proximity and accelerometer sensor
- USB accessory mode enabled
050811b
- optimised app killing (thanks beene)
- 8 step clock speeds and volts - same as in vorkkernel (hopefully will fix some of the bootloops)
- overclock upto 1400mhz
- compiled with toolchain 4.4.3
040811
- included init.d (thanks ilos for the heads up) - should fix some of the bootloops
030811
- initial release

My Github here

NB: I was building this as part of my learning process, and thought I would share it since V10E kernel doesn't have ext4 support yet. Please take it easy on me, i'm still learning ;)

If you like it dont forget that 'Thanks button' :D
 
Last edited:
  • Like
Reactions: barril, claboss, zacharias.maladroit and 45 others
M

meistertom

Senior Member
Apr 5, 2009
73
14
Thanks a lot for the kernel. Flashed some moments ago and so far no issues. :)
System feels very smooth, 3g, wifi and bt are working fine. :)
 
X

xgeneralex

Senior Member
Feb 2, 2011
107
3
I have flashed it on my djdroid 0.6 and it works very well atm...
OC is max @1.2ghz.
Thank you Imperticus!
 
Imperticus

Imperticus

Senior Member
Jan 27, 2011
1,184
1,243
ilos said:
flashed on stock V10e => stuck on LG logo ( with progress bar )
Click to expand...
Click to collapse

That's strange, because this is based on the stock v10e kernel. I've only tried it on Modaco based ROMs. Sorry, I can't think of a reason... I'll look into it. Did you manage to flash any other ext4 kernels?
 
ilos

ilos

Senior Member
Jun 17, 2007
1,534
246
Saint Priest
that's a problem i have each time i try to flash a custom kernel on a stock rooted rom :( that's happened since v10b ( c , d , etc.... ) same problem with cpajuste kernel , mck kernel.... Paul from Mocado doesn't known where is the problem too...
 
Imperticus

Imperticus

Senior Member
Jan 27, 2011
1,184
1,243
ilos said:
that's a problem i have each time i try to flash a custom kernel on a stock rooted rom :( that's happened since v10b ( c , d , etc.... ) same problem with cpajuste kernel , mck kernel.... Paul from Mocado doesn't known where is the problem too...
Click to expand...
Click to collapse

Thats very strange. is that specific to you?
Sorry to say, but is Paul can't find the problem, then I surely won't.
 
Kickasskev

Kickasskev

Senior Member
Jul 31, 2010
1,311
195
Sunderland
Imperticus said:

​

This is based on the newly released LG v10e kernel sources. It will only work with stock/Modaco based ROMs. Will not work with CyanogenMod based ROMs.

Features:
- EXT4 built in (finally)
- UC/OV support, overclocking upto 1300 mhz - use pimp-my-cpu (other apps may not work)
- deadline I/O scheduler
- few other little tweaks inc some designed to improve battery life
- new wireless module
- more to come..

Credits
- Cpujuste for work on oc/uv, and learnt a lot from his posts etc.
- Beene for some of the tweaks to improve battery life


DOWNLOAD
make sure you back up before installing, just incase something goes wrong..


NB: I was building this as part of my learning process, and thought I would share it since V10E kernel doesn't have ext4 support yet. Please take it easy on me, i'm still learning ;)

If you like it dont forget that 'Thanks button' :D
Click to expand...
Click to collapse

sorry if you think im picky but is this right, whats highlighted in red above??? :D

Under Clock/ Over Volt

should it not be

Over Clock/Under Volt
 
  • Like
Reactions: Imperticus
Kickasskev

Kickasskev

Senior Member
Jul 31, 2010
1,311
195
Sunderland
it's says on the first post it goes up to 1300mhz, but on the pimp my cpu it only goes to 1200mhz.

Am I just being picky again???
 
Imperticus

Imperticus

Senior Member
Jan 27, 2011
1,184
1,243
Kickasskev said:
it's says on the first post it goes up to 1300mhz, but on the pimp my cpu it only goes to 1200mhz.

Am I just being picky again???
Click to expand...
Click to collapse

That my friend is what we call a bug lol..the kernel itself has capacity to go to 1300mhz, but for some reason doesn't show up here. I'm working to fix that.
 
You must log in or register to reply here.

Similar threads

pengus77
[KERNEL][stable: M1 (2.6.39.4) - exp: Alpha 31 (3.1.10)] Kowalski Kernel
Replies
9K
Views
2M
RepurposedPotential
RepurposedPotential
vadonka
  • Poll
[CM7/MIUI Kernel][AUG21]CM7-ETaNa v2.6.32.59
Replies
6K
Views
1M
oneearleft
oneearleft
spica1234
  • Poll
*[31-OCT]*[SuperSonic]*[Kernel] HP Pro SuperSonic SR4R SNAPPY|| FLUID || POWERSAVER:
Replies
7K
Views
991K
Marsou77
Marsou77
Topogigi
[ROM] 20111014- lg o2x gb stock mod by topogigi v. 2.0 - Back in black
Replies
4K
Views
823K
H
hellboyborn
A
[ROM] CyanogenMod-7 for Optimus 2X - NIGHLTIES [05/01/2011]
Replies
13K
Views
2M
RedWildCat
RedWildCat

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 48
    Imperticus
    Imperticus
    NeoBlaze Kernel for stock/MCR
    Click to expand...
    Click to collapse
    ​

    Information about kernel, really, this contains everything (almost)
    This is based on the newly released LG v10e kernel sources. Now works on both Froyo and Gingerbread stock and MoDaCo based ROMs. Will not work with CyanogenMod based ROMs.
    There are 2 versions now, ext3, and a separate ext4 version. Make a backup before flashing especially the ext4 version, in case if it goes wrong.

    Features:
    - EXT4 built in (finally)
    - OC/UV support, overclocking upto 1400 mhz - use pimp-my-cpu (other apps may not work)
    - SDRAM, VDE and GPU overclock
    - Voodoo Sound
    - BFQ I/O scheduler
    - SLQB Memory Allocator
    - CIFS, TUN
    - few other little tweaks inc some designed to improve battery life
    - new wireless.ko module

    Credits
    - Cpasjuste for work on oc/uv, and learnt a lot from his posts etc.
    - Beene for some of the tweaks to improve battery life

    INSTALLATION
    - Be sure to REMOVE "boot settings" from Pimp My Cpu before installing the kernel to reset default values.
    1. reboot to CWM
    2. Clear cache
    3. Advanced, clear Dalvik
    4. install zip from SDcard
    5. Reboot


    DOWNLOAD
    make sure you back up before installing, just incase something goes wrong..

    280911 - froyo & gingerbread (doesn't change mount)
    280911 - EXT4 FROYO
    - Fixed bfq i/o scheduler
    - stock voltage at boot (1000mV)
    - halt avp when entering suspend

    210911b - EXT3 (froyo & gingerbread)
    210911b - EXT4 FROYO ONLY
    - now works on gingerbread ROMs (thanks to koush, benee and rusty for their work on AnyKernel flasher) (also heads up to TopoGigi for first running it on 2.3)
    - touchscreen tweaks, battery tweak
    - fixed touchscreen bug

    150911
    - BFQ now default I/O scheduler
    - OC/UV is back
    - default clock speed 1015MHz, 950mV

    130911
    - Added BFQ I/O Scheduler
    - Tegra2 specific compiler optimization
    - Added SLQB Memory Allocator and made it default allocator
    - lowmemorykiller: only check cache for thresholds (Brian Steuer)
    - CIFS, TUN
    120811 - normal version
    120811 - lower OC values
    - removed USB accessory (wasn't working properly anyway)
    - enabled RNDIS
    - fixed init.d permissions (hopefully will solve bootloops)
    - added a version with lower oc value - upto 1200Mhz
    090811
    - Voodoo sound added (thanks supercurio)
    070811
    - change to UV/OC values
    - SDRAM, VDE and GPU overclock (thanks vork and morfic)
    - fix for proximity and accelerometer sensor
    - USB accessory mode enabled
    050811b
    - optimised app killing (thanks beene)
    - 8 step clock speeds and volts - same as in vorkkernel (hopefully will fix some of the bootloops)
    - overclock upto 1400mhz
    - compiled with toolchain 4.4.3
    040811
    - included init.d (thanks ilos for the heads up) - should fix some of the bootloops
    030811
    - initial release

    My Github here

    NB: I was building this as part of my learning process, and thought I would share it since V10E kernel doesn't have ext4 support yet. Please take it easy on me, i'm still learning ;)

    If you like it dont forget that 'Thanks button' :D
    View
    5
    Imperticus
    Imperticus
    150911

    - BFQ now default I/O scheduler
    - OC/UV is back
    - default clock speed 1015MHz, 950mV
    View
    3
    Imperticus
    Imperticus
    090811 (latest ver) - DOWNLOAD

    - Voodoo sound added (thanks supercurio)
    View
    3
    Imperticus
    Imperticus
    130911 - probably final version

    - Added BFQ I/O Scheduler
    - Tegra2 specific compiler optimization
    - Added SLQB Memory Allocator and made it default allocator
    - lowmemorykiller: only check cache for thresholds (Brian Steuer)

    There are unlikely to be any further updates, as we're all moving to gingerbread and there are plenty of options for Froyo. However, when LG releases GB sources, I will post the new kernel.
    View
    3
    Imperticus
    Imperticus
    Quick update - 080511b - DOWNLOAD

    According the Cpusjuste, pimp-my-cpu works best for OV/UC

    - updated voltage, and clock speeds

    Code: 
    1250/1408Mhz
1125/1216Mhz
1050/1100Mhz
950/1015Mhz
900/760Mhz
850/655Mhz
800/503Mhz
770/389Mhz
    View

New posts