No, you have a sapphire, not a dream.... so flash the latest RA-sapphire for the 32B.
That means that your current rom doesn't have the binary flash_image... This has nothing to do with this recovery.
Contact your rom dev or use fastboot to flash.
I just flashed the old recovery (6.35) and it works fine. On the 1.6.2 Hero on my 32a sapphire it won't allow me to flash 32b roms, gives an error saying incompatible device or something (won't let me flash a rom built for dream). I'll try and find the error when i get home.
You can also just push the flash_image binary...
Or just fastboot boot the recovery and use the flash_image command via adb...
You can also just push the flash_image binary...
Or just fastboot boot the recovery and use the flash_image command via adb...
how would i go about pushing the flash_image binary?
and how would i get it?
please can you tell me how to do it ?
C:\AndroidSDK\tools>fastboot flash recovery recovery-RA-sapphire-v1.6.2H.img
sending 'recovery' (4494 KB)... FAILED (remote: not allow)
C:\AndroidSDK\tools>fastboot flash recovery recovery-RA-sapphire-v1.6.2H.img
sending 'recovery' (4494 KB)... FAILED (remote: not allow)
Hi,
I'm coming from a stock 1.5 ROM. Flashed the RA-sapphire-v1.6.2H recovery using fashrec. I can enter recovery mode but after a few seconds the phone freezes and then reboots. I've tried flashing using adb but got the same result. Tried the Pink version...saw the care bear (funny idea btw!), moved up and down in options but after a while got the same result once again (freeze folowed by a reboot after a few minutes). Could not find the recovery.log, where is it?
Here is my SPL and radio:
SAPPHIRE PVT 32A SHIPS-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
May 8 2009,21:02:32
Can't figure out the problem...
Thanks in advance!
Found the recovery.log. After retriving the log the recovery freezed once again.
Can someone point me me in the right direction?
Amon_RA? Anyone?
Thanks!
Here is the recovery log:
Found the recovery.log. After retriving the log the recovery freezed once again.
Can someone point me me in the right direction?
Amon_RA? Anyone?
Thanks!
Here is the recovery log:
im on 1.6, cm 4.2.15.1, and this flashed just fine from terminal emulator
maybe its no good on 1.5....?
dear AMON ,
Is there any way to get multiple BART...for different ROMS ????? ( same radio / different radio )
is BART doing the same thing as NANDROID BACKUP ( and is there possibitliy for multiple nandroid restore ) for different ROMS
Is there any way to get multiple BART...for different ROMS ????? ( same radio / different radio )
is BART doing the same thing as NANDROID BACKUP ( and is there possibitliy for multiple nandroid restore ) for different ROMS
hi,
when i tried to run bart backup i got following message
"error : run "bart" viaa adb"
does any one know why i am getting this?
when i tried to run bart backup i got following message
"error : run "bart" viaa adb"
does any one know why i am getting this?
try 2 or 3 times it will allow you same was happened to me but after trying 2 times it works in 3rd attempt
I get that with bart and nandroid.
All I do is flash any rom (doesn't matter the size or type) then bart/nandroid works correctly.
Or try multiple times.
Take a look at the link to BART at the bottom of the features on page one. He gives the commands to type yourself.
I'm guessing those could be done in ADB on your computer. I haven't tried it myself yet, but I want to try other roms and still be able to use the current CM for my daily stuff... so I'll be trying it soon.
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
13This is a custom recovery based on Cyanogen's recovery source with a lot of things added by me. The purpose of this recovery is to avoid using adb by accessing all features directly from the menu.
All source code is available at github.
This recovery if for the HTC Magic/MT3G only, if you have an :
- HTC Dream/G1 you should go here.
- HTC Hero you should go here.
- HTC Sprint Hero you should go here.
- HTC Eris you should go here.
- HTC Tattoo you should go here.
- HTC Nexus One you should go here.
Important notes
- 32A users with SPL 1.76.x should flash the Hero version! (Will be updated to v1.7.0 soon!!)
- Always check recovery.log before posting your issues!
You can do this by doing :- "cat /tmp/recovery.log" OR "cat /cache/recovery/log" right after you had the issue.
- Use the "move log to sd" option in the "others" menu right after you had the issue. This will move the log to /sdcard/recovery.log so you can easily open it with a text editor.
Features
Use the trackball (up+down) to navigate through the menu, press the trackball to select items.
You can also use the volume keys (vol-up + vol-down) to navigate, and the CALL-ANSWER key to select items (in case your trackball is broken).
- full ADB access in recovery mode
- Busybox v1.15.3
- HW-Key navigation (volume keys + CALL-ANSWER) option
- Extended menu (with keyboard-shortcuts):
- Reboot system now :: reboot your phone
- USB-MS Toggle :: enable/disable USB mass storage (use when the phone is connected to your PC)
- Backup/Restore (recovery partition not included!)
- Nand backup :: Make a Nand backup
- Nand + ext backup :: Make a Nand + ext backup
- Nand restore :: Restore a Nand backup
- BART backup :: Make a BART backup (Nand + ext)
- BART restore :: Restore latest BART backup
- Bck Google files :: Makes a backup of the Google proprietary system files in /cache/google
- Rst Google files :: Restores the Google proprietary system files from /cache/google
- Flash zip from sdcard :: Flash a zip update file from your sdcard
- Wipe
- Wipe data/factory reset :: Wipe /data and /cache
- Wipe cache :: Wipe /cache only
- Wipe Dalvik-cache :: Wipe /cache/dalvik-cache
- Wipe SD:ext partition : Wipe the ext partition on your sdcard
- Wipe battery stats : Wipe the battery stats in /data
- Wipe rotate settings : Wipe the sensor settings in /data
- Partition sdcard
- Partition SD :: Interactive SD partitioning
- Repair SD:ext :: Repair the ext partition
- SD:ext2 to ext3 :: Convert ext2 to ext3
- SD:ext3 to ext4 :: Convert ext3 to ext4
- Other
- Fix apk uid mismatches :: Does extacly that
- Move recovery.log to SD :: Moves the recovery log file to your sdcard. (Use when you want more detailed recovery log information)
- Power off :: Powers off your phone
- Scripts available via adb :
- Nandroid v2.2.1 : enter "nandroid-mobile.sh" to start.
- BART v1.3.1 (Backup and Restore Tool) : enter "utility" or "u" to start.
- switchrom.sh V1.1 : enter "switchrom" to start.
- sdparted v0.6 : enter "sdparted" to start.
Install
- There are several ways to install a custom recovery, choose the one that suits you most (I probably forgot a few).
- You don't need to enter "mount -a" if your partitions are already mounted.
- Use the H/G version if your Magic is HTC branded (PVT 32A board)/Google branded (PVT 32B board).
via fastboot :
- Requires engineerings SPL!
Code:Copy recovery-RA-sapphire-v1.7.0G.img to a location where fastboot can find it. Boot your G1 into fastboot mode (boot while holding BACK) Connect your G1 via usb to your pc/mac/... fastboot devices (to make sure that fastboot "sees" your device) fastboot flash recovery recovery-RA-sapphire-v1.7.0G.img
via adb :
- Requires a custom recovery (with test-keys) like Cyanogen's v1.4 or my previous recovery
- Do NOT follow these steps from a terminal application on the phone, make sure that you've booted into a custom recovery first!!!
Code:Copy recovery-RA-sapphire-v1.7.0G.img to the root of your sdcard Boot into your current custom recovery (boot while holding HOME) Connect your G1 via usb to your pc/mac/... adb shell #mount -a (this can give back an error if you don't have an ext partition, don't worry about it and just proceed) #flash_image recovery /sdcard/recovery-RA-sapphire-v1.7.0G.img
via terminal application installed on the phone :
- Requires root
[*]DO NOT use this method with CM5.0.7, there are currently some memory issues while flashing, use the above methods (preferably the fastboot method) instead until the issue is fixed in CM5.0.7!
Code:Copy recovery-RA-sapphire-v1.7.0G.img to the root of your sdcard start the terminal app #flash_image recovery /sdcard/recovery-RA-sapphire-v1.7.0G.img
Download
- ALWAYS check the md5sum to make sure the zip isn't corrupted.
- Click on the Mirror-link if you don't like rapidshare
- Use the H/G version if your Magic is HTC branded (PVT 32A board)/Google branded (PVT 32B board).
- recovery-RA-sapphire-v1.7.0G.img - MD5Sum: 8b3b5ff90575eba0c5bfc13c0fa6b8ea
- recovery-RA-sapphire-v1.7.0G-cyan.img - MD5Sum: 8846b53e3184d688e3e8a628ad81074f
- recovery-RA-sapphire-v1.7.0H.img - MD5Sum: f78bc0ff51f233666a9a5f72b56aabec
- recovery-RA-sapphire-v1.7.0H-cyan.img - MD5Sum: 1ed8363e05b3515d7f976a8764cfad51
Change-log :
v1.7.0
Code:- Fixed some minor bugs - Recovery and scripts use /sd-ext instead of /system/sd as mountpoint to support the new apps2sd method (implemented mostly by Chris Soyars) - Added an option to backup/restore Google proprietary Android system files (backuptool.sh written by Cyanogen) - Removed "move apps2sd"-option as it's not needed anymore with the new apps2sd method - Updated BART to v1.3.1 (updated by Dumfuq to support /sd-ext) - Added a wipe cache only option - Nandroid now backups/restores /cache again by default - Dalvik-cache wipes /cache/dalvik-cache now - Removed SDCARD: prefix in output when chosing zip to flash - Added Cyan version (There's no difference with the normal version, only the wallpaper and textcolor changed)
v1.6.2
Code:- Added power off menu item - New unyaffs binary patched by Koushik Dutta and Packetlss to fix the "losing root"-issue and incorrect file-time after a Nandroid restore - New dump_image binary (by Brainaid) patched by Packetlss to fix the "bad blocks"- Nandroid restore issue. [COLOR="Red"][B](This will not fix old corrupted Nandroid backups! Please make new backups!!)[/B][/COLOR] - New mkyaffs2image binary - New flash_image binary - Updated busybox to v1.5.3 - Nandroid menu options will NOT backup or restore recovery, cache, misc, splash1+2 (to avoid issues) - Fixed wipe option not wiping when ext was not present - Created carebear versions after the idea of packetlss - Switched the Nexus logo to a Green Carebear with Nexus One logo (Thanks Montalbert!)
Special thanks to :
- packetlss for all the hours of support and awesome coding skills, THANKS man ^^, donate to Haiti
- Koushik Dutta for the unyaffs binary code fix and help ^^
- pensive for adding awesome features to Nandroid
- Bkmo for his utility script!
- Devsk for his switchrom script!
- 51dusty for his sdparted script!
- k4str0 for his fix_permissions v2.03 update.
- Devsk, Dumfuq, Overground for creating BART
- Androidappcritics for the reboot idea in BART
- rikupw for the ideas and toggle_ums script.
- MLIGN for the idea to port my recovery to the Dream.
- http://theunlockr.com for all the awesome video’s ^^
- JesusFreke for his awesome JFv1.43's recovery , donate
1I think its because the stock spl has signiture checking on. Change the spl though and...1But there says "Only flash recovery-RA-hero-v1.6.2.img if you have a 32A Sapphire with 6.35.x.x radio and 1.76.x SPL, recovery-RA-hero-v1.7.0.1.img will NOT boot! I'll create a new Sapphire version soon."
Thanks.
