[KERNEL] nAa-ics-04 [5/7/12] Custom ICS kernel + CWM Recovery
- Thread starter nobodyAtall
- Start date
-
- Tags
- development
Good to know that nAa still working hard on minis...!!
Sent from my LT26i using xda app-developers app
Sent from my LT26i using xda app-developers app
Συμπατριώτη έκανα μαλακία!
Hello there. I did something silly, I was on gb nAa with minicm7 and I wanted to try cm10.
So I used flashtool to flash the new jb kernel for minicm10, I flashed minicm10 all ok!
But because it was a little bit more slow than 7 i rushed and I wanted to roll back to MiniCM7.
So I FORGOT the "uninstall" step for the new kernel and I just used flashtool to install the old nAa kernel.
So now, I got no recovery, cannot do anything with the back button and plugging the usb (so no seus and/or flashtool).
It's a super brick.
Is there anything I can do to un-brick from this situation ?
I remind: no boot, just got stuck in the nAa logo, no recovery, no back button + usb combination for seus.
Hello there. I did something silly, I was on gb nAa with minicm7 and I wanted to try cm10.
So I used flashtool to flash the new jb kernel for minicm10, I flashed minicm10 all ok!
But because it was a little bit more slow than 7 i rushed and I wanted to roll back to MiniCM7.
So I FORGOT the "uninstall" step for the new kernel and I just used flashtool to install the old nAa kernel.
So now, I got no recovery, cannot do anything with the back button and plugging the usb (so no seus and/or flashtool).
It's a super brick.
Is there anything I can do to un-brick from this situation ?
I remind: no boot, just got stuck in the nAa logo, no recovery, no back button + usb combination for seus.
Prepare flashtool to flash the old kernel, and then:
While your phone is on the nAa logo, plug in your usb-cable, press home and power together and as soon as the screen goes black, press back-button to go into flashmode.
your phone is not brick.
> keep your phone on in whatever state (i believe in that situation your phone cant be turn off except leaving battery to drain)
> prepare flashtools to install nAa JB kernel
> connect your usb cable phone to computer
> force restart your phone by pressing home and power button together.
> nAa JB kernel will be flashing
> now, you can enter cwm to start "uninstall step"
I can reboot it with home+power. I can also shut it down because I cut it open and I remove the battery cable.
But pressing back + usb plug doesn't boot. Flashtool doesn't sees it.
Only when I leave the back button it will open again.
That's why I said no back+usb
I can reboot it with home+power. I can also shut it down because I cut it open and I remove the battery cable.
But pressing back + usb plug doesn't boot. Flashtool doesn't sees it.
Only when I leave the back button it will open again.
That's why I said no back+usb
Okay. But you can try my method... you don't have to turn off your phone and using back button..
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
64Search no more. This is THE kernel for your ICS X10mini.
Before unlocking your bootloader, read this thread
If you brick your device, you are the sole responsible.
Preface:
- If you use this kernel on a gingerbread ROM, I will laugh at your noobness
- If you use this kernel on a stock ROM, it will cook you dinner
Features:
- Forked from nAa-11
- Built with linaro-4.7.1 toolchain
- Full ICS support
- CWM-Based Recovery 5.5.0.4
- Genlock: backported from CAF 3.0
- Socinfo and internal_power_rail ported from CAF 3.0
- KGSL version 3.8 (1.2): backported from CAF 3.0 / Latest SE sources
- netfilter: add xt_qtaguid table support for network statistics
- netfilter: ported xt_connmark xt_mark xt_quota2 xt_TPROXY from latest SE sources
- binder: backported from CAF 3.0
- SmartassV2 bugfixes
- Bluetooth tethering support
- ICS ramdisk and related fixes
- KSM backported from latest SE sources / fixes from CAF 3.0
FAQ:
If you have any issues, please read the FAQ thread first: http://xdaforums.com/showthread.php?t=1575831
Requirements:
- Unlocked bootloader --> http://xdaforums.com/showthread.php?t=1254225
- MiniCM9 or any ICS, source-based ROM (install this kernel first, then install the ROM)
- Flashtool tested to be working with your phone, e.g. from here: http://www.multiupload.com/GYL7A7XQBT Original flashtool thread: http://xdaforums.com/showthread.php?t=920746
Install:
- Backup
- Unlock your bootloader as described here: http://xdaforums.com/showpost.php?p=17384177&postcount=3 or here: http://xdaforums.com/showthread.php?t=1254225
- Download the kernel ftf file from here and move it to Flashtool\firmwares so that Flashtool can pick it up
- Flash the kernel via Flashtool
- Reboot and you should see the kernel boot animation:
Uninstall:
- Flash back to stock using Flashtool or SEUS.
Notes:
Dualtouch:
- If you want to enable the fake DT by dx (instead of andrej456's which is the default), you have to insert the following line in the /system/etc/hw_config.sh file:
- If you want to remove the fake DT altogether, insert the following line in the /system/etc/hw_config.sh file:
Sources:
The linux kernel is GPL'ed, everyone who does modifications should make them publicly available.
https://github.com/nobodyAtall/nAa-kernel-ics
Donate:
If you are enjoying my work please consider donating:
.
Donations are voluntary but allow me to spend more time on this project.
Disclaimer:
I can't be held responsible if this Kernel bricks your device or makes it explode in your hands! Use it at your own risk!
21nAa-ics-04 is released! Flash it with MiniCM9-3.0.3 for best experience
Changelog:
### nAa-ics-04
* Built with linaro-4.7.1 toolchain
* Ramdisk improvements
* Tune dirty_background_ratio and vm_dirty_ratio
* A bit more ram reclaimed
* Better dual touch for mimmi20Hi all!
nAa-ics-03 is released today. Updates / changes for this new kernel:
### nAa-ics-03
* Updated recovery: CWM-Based Recovery 5.5.0.4
* Latest busybox from ICS sources
* Some more RAM (185MB total ram reported by ICS)
* Ramdisk optimizations
* yaffs2 updates
* cleancache and support for ext3/4
* msm_rotator updates
* Binder bugfixes
* kgsl impovements and tuning
* genlock updates
Remember to flash this with MiniCM9 for best experience
Enjoy!16Changelog:
nAa-ics-04
- Built with linaro-4.7.1 toolchain
- Ramdisk improvements
- Tune dirty_background_ratio and vm_dirty_ratio
- A bit more ram reclaimed
- Better dual touch for mimmi
nAa-ics-03
- Updated recovery: CWM-Based Recovery 5.5.0.4
- Latest busybox from ICS sources
- Some more RAM (185MB total ram reported by ICS)
- Ramdisk optimizations
- yaffs2 updates
- cleancache and support for ext3/4
- msm_rotator updates
- Binder bugfixes
- kgsl impovements and tuning
- genlock updates
nAa-ics-02
- msm_mdp: Ported from CAF 3.0
- MDP_Y_CBCR_H2V2_ADRENO ported from CAF 3.0
- kgsl: power management and improvements
- Pmem support for camera
- New cool kernel boot animation instead of static logo
nAa-ics-01
- Forked from nAa-11
- Full ICS support
- Genlock: backported from CAF 3.0
- Socinfo and internal_power_rail ported from CAF 3.0
- KGSL version 3.8 (1.2): backported from CAF 3.0 / Latest SE sources
- netfilter: add xt_qtaguid table support for network statistics
- netfilter: ported xt_connmark xt_mark xt_quota2 xt_TPROXY from latest SE sources
- binder: backported from CAF 3.0
- SmartassV2 bugfixes
- Bluetooth tethering support
- ICS ramdisk and related fixes
- KSM backported from latest SE sources / fixes from CAF 3.0
16
