[Q&A] Ubuntu on the Transformer (eMMC install)

Search This thread
By:
Advanced…
X

x3maniac

Inactive Recognized Developer
Sep 2, 2008
361
453
New York
www.novaspirit.com
Barracuda96 said:
Tried to flash CWM on my TF101 by running as instructed but the script just stops like below, anyone knows why and how I can flash CWM on my TF101?



After this its just stops, have been trying several times and nothing happens, have waited a long time and it just doesn't happen anything else, anyone know why?
Click to expand...
Click to collapse

download this version i have uploaded on my site http://www.novaspirit.com/tubuntu/OLiFE-wheelie-sbkv2.tgz

use wheelie located in the /bins/ folder
Code: 
/path/to/wheelie -1 -o 0x300d8011 --bl /path/to/bootloader.bin -c /path/to/transformer.bct

this will get it to phone download mode
then this command will flash it
Code: 
/path/to/nvflash -r --download 5 /path/to/recovery.img

download 5 is the recovery partition
Click to expand...
Click to collapse

-d
 
Barracuda96

Barracuda96

Senior Member
Oct 4, 2012
62
7
Skåne
When I run the first code I get this

Code: 
Wheelie 0.1 - Preflight for nvflash.
Copyright (c) 2011-2012 androidroot.mobi
========================================

Using SBK type 1.
Using bootloader: 'images/bootloader.bin'.
Using BCT: 'images/transformer.bct'.
----------------------------------------

libusb:error [op_open] libusb couldn't open USB device /dev/bus/usb/001/008: Permission denied.
libusb:error [op_open] libusb requires write access to USB device nodes.
[-] Device detection failed with error -3.
christian@ubuntu:~/Hämtningar/OLiFE-wheelie-sbkv2 (2)$ bins/wheelie -1 -o 0x300d8011 --bl images/bootloader.bin -c images/transformer.bct
Wheelie 0.1 - Preflight for nvflash.
Copyright (c) 2011-2012 androidroot.mobi
========================================

Using SBK type 1.
Using bootloader: 'images/bootloader.bin'.
Using BCT: 'images/transformer.bct'.
----------------------------------------

libusb:error [op_open] libusb couldn't open USB device /dev/bus/usb/001/008: Permission denied.
libusb:error [op_open] libusb requires write access to USB device nodes.
[-] Device detection failed with error -3.

and then when I run the second code I get

Code: 
christian@ubuntu:~/Hämtningar/OLiFE-wheelie-sbkv2 (2)$ bins/nvflash -r --download 5 images/recovery.img
bash: bins/nvflash: No such file or directory
 
X

x3maniac

Inactive Recognized Developer
Sep 2, 2008
361
453
New York
www.novaspirit.com
Barracuda96 said:
When I run the first code I get this

Code: 
Wheelie 0.1 - Preflight for nvflash.
Copyright (c) 2011-2012 androidroot.mobi
========================================

Using SBK type 1.
Using bootloader: 'images/bootloader.bin'.
Using BCT: 'images/transformer.bct'.
----------------------------------------

libusb:error [op_open] libusb couldn't open USB device /dev/bus/usb/001/008: Permission denied.
libusb:error [op_open] libusb requires write access to USB device nodes.
[-] Device detection failed with error -3.
christian@ubuntu:~/Hämtningar/OLiFE-wheelie-sbkv2 (2)$ bins/wheelie -1 -o 0x300d8011 --bl images/bootloader.bin -c images/transformer.bct
Wheelie 0.1 - Preflight for nvflash.
Copyright (c) 2011-2012 androidroot.mobi
========================================

Using SBK type 1.
Using bootloader: 'images/bootloader.bin'.
Using BCT: 'images/transformer.bct'.
----------------------------------------

libusb:error [op_open] libusb couldn't open USB device /dev/bus/usb/001/008: Permission denied.
libusb:error [op_open] libusb requires write access to USB device nodes.
[-] Device detection failed with error -3.

and then when I run the second code I get

Code: 
christian@ubuntu:~/Hämtningar/OLiFE-wheelie-sbkv2 (2)$ bins/nvflash -r --download 5 images/recovery.img
bash: bins/nvflash: No such file or directory
Click to expand...
Click to collapse

you need root access. try using "sudo"

and the second command mean your not setting the right path try using
Code: 
[B]./[/B]bins/nvflash -r --download 5 [B]../[/B]images/recovery.img

-d
 
Barracuda96

Barracuda96

Senior Member
Oct 4, 2012
62
7
Skåne
Still getting an error :/

Code: 
christian@ubuntu:~/Hämtningar/OLiFE-wheelie-sbkv2 (2)$ sudo bins/wheelie -1 -o 0x300d8011 --bl images/bootloader.bin -c images/to/transformer.bct
Wheelie 0.1 - Preflight for nvflash.
Copyright (c) 2011-2012 androidroot.mobi
========================================

Using SBK type 1.
Using bootloader: 'images/bootloader.bin'.
BCT: 'images/to/transformer.bct' does not exist!
Usage: wheelie [options] --bl <bootloader file> --bct <bct file>

Argument                Description

-v or --version         Display version information
-h or --help            Display this menu
-1 or --sbkv1           Use wheelie for SBKv1 devices
-2 or --sbkv2           Use wheelie for SBKv2 devices
-s or --sbk             Set SBK for devices not officially supported by wheelie
-o or --odm             set the odmdata (Required for operation.) Example: 0x300d8011
--bl or --bootloader    Set the bootloader filename (required for operation)
-c or --bct             Set the BCT filename (required for operation)

christian@ubuntu:~/Hämtningar/OLiFE-wheelie-sbkv2 (2)$ . bins/nvflash -r --download 5 ../images/recovery.img
bash: .: bins/nvflash: cannot execute binary file
christian@ubuntu:~/Hämtningar/OLiFE-wheelie-sbkv2 (2)$
 
X

x3maniac

Inactive Recognized Developer
Sep 2, 2008
361
453
New York
www.novaspirit.com
Barracuda96 said:
Still getting an error :/

Code: 
christian@ubuntu:~/Hämtningar/OLiFE-wheelie-sbkv2 (2)$ sudo bins/wheelie -1 -o 0x300d8011 --bl images/bootloader.bin -c images/to/transformer.bct
Wheelie 0.1 - Preflight for nvflash.
Copyright (c) 2011-2012 androidroot.mobi
========================================

Using SBK type 1.
Using bootloader: 'images/bootloader.bin'.
[COLOR="Red"]BCT: 'images/to/transformer.bct' does not exist![/COLOR]
Usage: wheelie [options] --bl <bootloader file> --bct <bct file>

Argument                Description

-v or --version         Display version information
-h or --help            Display this menu
-1 or --sbkv1           Use wheelie for SBKv1 devices
-2 or --sbkv2           Use wheelie for SBKv2 devices
-s or --sbk             Set SBK for devices not officially supported by wheelie
-o or --odm             set the odmdata (Required for operation.) Example: 0x300d8011
--bl or --bootloader    Set the bootloader filename (required for operation)
-c or --bct             Set the BCT filename (required for operation)

christian@ubuntu:~/Hämtningar/OLiFE-wheelie-sbkv2 (2)$ . bins/nvflash -r --download 5 ../images/recovery.img
bash: .: bins/nvflash: cannot execute binary file
christian@ubuntu:~/Hämtningar/OLiFE-wheelie-sbkv2 (2)$
Click to expand...
Click to collapse

your using the wrong paths
 
X

x3maniac

Inactive Recognized Developer
Sep 2, 2008
361
453
New York
www.novaspirit.com
Barracuda96 said:
Yeah corrected it and now it goes into phone mode but still when I enter the next code it says

Code: 
christian@ubuntu:~/Hämtningar/OLiFE-wheelie-sbkv2 (2)$ [B][COLOR="Red"].[/COLOR][/B] bins/nvflash -r --download 5 ../images/recovery.img
bash: .: bins/nvflash: cannot execute binary file
Click to expand...
Click to collapse

wrong path again.
Code: 
[COLOR="Red"]./[/COLOR]bins/nvflash -r --download 5 ./images/recovery.img

-d
 
X

x3maniac

Inactive Recognized Developer
Sep 2, 2008
361
453
New York
www.novaspirit.com
Barracuda96 said:
Yeah but then it doesn't found the directory

Code: 
christian@ubuntu:~/Hämtningar/OLiFE-wheelie-sbkv2 (2)$ ./bins/nvflash -r --download 5 ../images/recovery.img
bash: ./bins/nvflash: No such file or directory
Click to expand...
Click to collapse

either you didn't extract the nvflash file or it's places some where else. first try to look for it either ls the directory or use the find command.. and also you need to run nvflash using sudo or as root user.

p.s. i'm not trying to be mean. please don't take this the wrong way. but these are all basic linux commands and seem like your not a linux user... so if your having a hard time use my tubuntu app for windows, you can get it from the sig. just dont want you to do more harm to your device if your not too sure on what you are doing.

-d
 
M

muposat

Member
Dec 7, 2013
5
1
Asus Transformer TF701T

Hello, this thread seems to be somewhat neglected, with the latest post being almost a year ago.

Does anyone have pointers for installig Ubuntu on Asus Transformer TF701T?

Thanks
- Muposat
 
P

parad1me

New member
Dec 28, 2013
3
0
I seem to have gone into recovery from within android, and I am not able to get to the wipe data screen, as lubuntu boots too quickly. Any suggestions?
 
You must log in or register to reply here.

Similar threads

EpiphanyMachine
[HowTo] Native Ubuntu - Post Install Questions Here not in [DEV]
Replies
92
Views
67K
E
eLar19
I
[Q] How To Install WhatsApp On A Wifi Only Asus Transformer?
Replies
27
Views
67K
O
osabor
B
[Solved] MTP for WinXP - A service installation section in this INF is invalid
Replies
40
Views
202K
I
istvan_06
M
[Q] Bricked Transformer
Replies
548
Views
70K
E
enriquekit
E
[Q] Asus transformer won't turn on :(
Replies
38
Views
64K
G
Grantf44

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 66
    lilstevie
    lilstevie
    This thread is for help and support related to ubuntu on the eeepad transformer, all questions not related to development should be asked here, please be friendly and do not flame each other or I will request the thread be closed.

    Download links are in the third post.

    There is a wiki entry here that has a bit more detailed explanation. Please note though that as it is a wiki information
    quoted in there may or may not be entirely accurite.

    you will need to download an nvflashable rom, like prime.



    Please read the README before attempting this. The readme is below as well as in the kit, YOU WILL LOSE DATA.

    Download links are in the second post.


    OLiFE for the ASUS transformer
    ------------------------------------------------------------------

    (c) 2011 Steven Barker <lilstevie@lilstevie.geek.nz>

    This package should have only been linked to from xda-developers
    or rootzwiki if you got the links to this package from anywhere
    but those sites please send an email to the above email
    address with the subject: "unauthorised posts"

    DISCLAIMER
    ------------------------------------------------------------------

    Steven Barker (lilstevie) nor anybody will take any responsibility
    for any damage, data loss, fire, death of a loved one, or loss of
    data resulting from using this mod for your device. Using this mod
    may void your warranty.

    NVFLASH
    ------------------------------------------------------------------

    nvflash is the intellectual property of nvidia, and remains the
    property of nvidia. Any questions or queries regarding the usage
    and licence of nvflash should be directed to nvidia.

    abootimg
    ------------------------------------------------------------------

    abootimg is by Gilles Grandou <gilles@grandou.net> and is
    unmodified. The source is available from online at
    http://gitorious.org/ac100/abootimg

    usage
    ------------------------------------------------------------------

    Usage has changed since the release of the last kit, please read
    these instructions carefully, as the install method is a little
    more complex, (but easier once you use it).

    If you downloaded OLiFE.tar.gz you will need to inject the android
    rom and ubuntu image. You can use any nvflashable rom with this.
    I recommend that you use prime as that is the configuration that
    I have tested myself, and the ROM that I support for use with this
    device. You can download the ubuntu image from
    http://lilstevie.geek.nz/ports/ubuntu.img.gz.

    If you downloaded OLiFE-Prime-Edition.tar.gz you will not need to
    download the ubuntu image or an nvflash rom as they are seeded into
    the image.

    Install instructions:

    1) Download the specific flavour of OLiFE that you want to use, and
    extract it with "tar xvf <filename>".

    2) If needed inject android rom and ubuntu image.

    3) From the directory that OLiFE was extracted in run the main script
    with the command ./OLiFE.sh.

    4) Read the text that comes up and answer the question it asks.

    5) Follow the menu to the option you want (below is a breakdown of
    what each menu item is) and follow the instructions prompted. (also below
    is instructions on how to get into the modes requested).

    Menu items:

    1) Backup Menu:

    1) Full Backup (stock)
    - Full backup (stock) takes a full backup of a stock
    android system. This gives you an option to also back
    up your user data(this will take a while).
    2) Full Backup (ubuntu)
    - Full backup (ubuntu) takes a full backup of a system
    that dualboots android and ubuntu, this backs up your
    system, and the ubuntu image. This gives you an option
    to also back up your user data(this will take a while).
    3) User data only
    - This backs up the user data partition on your device.
    (This option takes a while)
    4) Android ROM
    - This option backs up the android system only. This
    option generates all the files (minus bootloader, and BCT)
    required to flash a rom via nvflash.
    5) Ubuntu Install
    - This option backs up the ubuntu install on your device.
    2) Flash Device:

    1) Dualboot:
    - This option will install ubuntu to your device in a
    dualbooting configuration with android. During the
    installation process it asks you which OS you would like
    to boot by default.
    2) uboot (linux only):
    - This option will install ubuntu with u-boot and the
    ChromeOS kernel that supports acceleration. This option
    is currently unavailable, but should be available soon.
    3) asus boot (linux only):
    - This option will install ubuntu with the asus bootloader
    with this configuration you will use all the eMMC for ubuntu
    and there will be no android system installed on your device.
    4) stock:
    - This option will partition the device in a stock way and
    install the android system that is in ./images. Use this
    option if you no longer want ubuntu on your device.
    3) Update Device:

    1) Android Kernel:
    - This option will update the android kernel on your device
    with the boot.img from ./images/. This allows you to install
    your own kernel on the device for android rather than the one
    that comes with your chosen rom.
    2) Ubuntu/Linux Kernel:
    - This will update the ubuntu kernel on your device to the version
    included in this flashkit. This option is for updating just the
    kernel with nvflash rather than using the blob method. This method
    is also good for if you flash a bad ubuntu kernel to the device.
    3) Android ROM:
    - This option will update the android rom on the device with the
    one from ./images/. This is good for if the ROM you use is updated
    or you would like to change ROMs and there is an nvflash image for it.
    This option does not destroy your data.
    4) Ubuntu Rootfs:
    - This will update your ubuntu image on the device. This is destructive
    to data stored in the ubuntu image.
    5) Advanced (Unsupported):
    - Any option in this menu is not supported and should be considered
    unstable. There may be bugs in these options and they are not maintained
    at this point in time.

    1) Flash ChromeOS Kernel (Primary Boot):
    - This option will flash the ChromeOS kernel to the primary boot
    partition. This option may not currently work in it's current
    configuration.
    2) Flash ChromeOS Kernel (Secondary Boot):
    - This option will flash the ChromeOS kernel to the secondary boot
    partition. This option may not currently work in it's current
    configuration.
    3) Update Uboot Partition:
    - This option will update the u-boot boot partition that u-boot
    reads the kernel and boot script from. This option does work if
    you have installed u-boot by compiling it from source and installed
    it yourself.
    4) Flash ClockworkRecoveryMod:
    - This option allows you to temperarily flash CWR to the device so
    you can update the installed rom. It backs up the current kernel in
    the recovery kernel position and then flashes CWR. When you have finished
    using CWR you then push any key and put the device back in APX mode and
    it will restore the kernel that was in that position. (This only works if
    android is your primary boot option at this time).

    4) Inject Firmware:

    1) Bluetooth firmware (default install):
    - This option will inject the Bluetooth firmware from the
    android ROM located at ./images/ in to the ubuntu of your
    currently running system.
    2) Bluetooth firmware (CrOS Kernel):
    - This option will inject the Bluetooth firmware from the
    android ROM located at ./images/ in to the ubuntu of your
    currently running system and flashes the proper u-boot kernel
    if you no longer need adb support.

    5) Onscreen Keyboard:
    - This runs OnBoard so that you can run through oem-config properly
    you only need to use this option if you do not have a keyboard dock
    and on the first boot.

    1) Standard Kernel:
    - This will invoke oem-config on the standard kernel installed
    on the device.
    2) ChromeOS Kernel:
    - This will invoke oem-config on the u-boot kernel that is
    installed on the device and flashes the proper u-boot kernel
    if you no longer need adb support.

    Device Modes:

    APX Mode:
    -This mode is used by nvflash to write files to the eMMC device.
    To boot in this mode you press Power and Vol-Up.

    Recovery Mode:
    - This mode is where CWR or Asus recovery normally lives, but is
    replaced by the secondary OS in the dualboot configuration.
    To boot in this mode you press Power and Vol-Down, then Vol-Up when prompted.

    Normal Boot:
    -This mode is where android normally lives.
    To boot in this mode you press the Power button until the screen turns on.
    View
    25
    lilstevie
    lilstevie
    Changelog
    ------------------------------------------------------------------

    1.2a - Release name: Odyssey

    * New name for kit: OLiFE
    * New menu system
    * Updated README
    * Better handling of platform detection
    * Bluetooth support in ubuntu.img
    * Preliminary support for ChromeOS kernel
    * Preliminary support for uboot
    * Fixed touchpad
    * Fixed network manager
    * Updated to ubuntu oneiric
    * More options for flashing and updating
    * OTB Wireless support (No more injecting)
    * Smaller ubuntu.img for faster upload to device
    * Auto resizing of rootfs on first boot
    * Larger partition size (6GB) for ubuntu
    * Refactored to more easily between devices
    * Maybe something else I have missed

    1.1 - Release name: Daedalus

    * Firmware injector for BT and wifi firmwares


    1.0 and silent updates - Release name: Prometheus

    * Support for x86_64 linux distributions
    * Updated README for release on xda-developers
    * Fixes to install scripts
    * Initial Release
    View
    8
    Jhinta
    Jhinta
    Multiboot by cmw.zips

    This will restore cwm on recovery partition.
    And multiboot by flashing Ubuntu.zip or Android.zip

    Create flash-recovery.sh in flashkit dir !!

    The code below wil not work unless you provide some info on witch flash mode you used !!!!!
    Like me i have selected flash-linux-android.sh,
    View it and find witch --config file it use as you can see below.

    --->--configfile ./flash/android-linux.cfg <---

    Code: 
    #!/bin/sh
nflash --bct ./images/transformer.bct --setbct --configfile ./flash/android-linux.cfg --bl ./images/bootloader.bin --odmdata 0x300d8011 --sbk 0x1682CCD8 0x8A1A43EA 0xA532EEB6 0xECFE1D98 --sync
nflash -r --download 5 ./images/recovery.img

    To Make this code above work replaced nflash with ./nvflash -> then sudo sh flash-recovery.sh

    Android <-- Prime 1.7 kernel !! you can select any kernel you want !!
    MD5 : 97cf64f6d5698276bde1d8657ec80cef

    Ubuntu
    MD5 : 40c9f82c30e0fd8230c712e23f2e3597
    View
    7
    lilstevie
    lilstevie
    Downloads:

    RootFS md5sum(1a9fa8a698e4a96245a3c08511841eb4)
    OLiFE md5sum(c30263fd8271a23bb211fd9fdd69fa45)
    OLiFE Prime Edition md5sum(767779ccfa200e5e00b2f1e33a3d73a9)

    Sources:
    http://gitweb.lilstevie.geek.nz
    To clone the repos "git clone git://lilstevie.geek.nz/$(name of repo).git"
    View
    6
    R
    rdnetto
    Simple Version

    Here's a simple nvflash package I put together to make things easy. It uses Jhinta's CWM files (incl.) and Prime 1.7. Just add ubuntu.img (from the OP) and run download-ubuntu.sh. (You'll still need to run the firmware injection script for drivers though.)

    http://www.multiupload.com/6GZSLRBP8S

    MD5: 843f964141ac96423c2fcdfc26092050
    View

New posts