[Q] Tf300 dead after changing digitizer?
I got my tf300 some time ago, and just today i recieved all the components needed in order to change it;note that the tablet was disasembled for more than a month, but before that, the battery was charged, so it remained like a month like that as well i don't have best memory of the disasembly proceedure.
So today, i managed to pack it back (without putting the back cover of the tablet, and tried to boot it, but nothing happened.So i put it on the charger where a sound (charging sound) beeped and a red led turned on (later green).I let the tablet charging for more than half an hour, and tried to boot it again but no sign of life at all.I removed all the screws etc and disassembled it for one more time in order to check if everything was put right.
Both digitizer cables was secured.
Screen cable was fine.
Also i tried to check the on and volume rockers cable and by mistake i ruined the plastic top of the female adaptor, but the cable still fits fine inside (that happened during the second disassebly so it was not the original cause for sure).
Also, i noticed that there is an on/off switch next to the power button.This switch was ON the whole time.
I found a button at the digitizer circuit and pressed it (tablet off).
I've tried to remove the digitizer and try to boot.Nothing happened.
What i am afraid of, is that the whole proceedure make me burn some circuit of the tablet by static electricity or by sort-circuit something by my slightly swetty hands.
Device: Samsung Galaxy S II
: [AOSP-JB 4.2.1 | MIUI v5 Style Beta 3.0
My website: http://500px.com/TheoKondak