[KERNEL] AJK v4.9 [** The ONE **] [JB]

Status
Not open for further replies.
Search This thread
By:
Advanced…
sykoj82

sykoj82

Senior Member
Jan 1, 2012
1,191
452
Manchester, NH
V2.05s interactive governor immediately freezes after applying it in stweaks..did the same thing last version too. Other than that it's a good kernel.
2.05Ns version interactive works fine
 
Last edited:
twcobra

twcobra

Senior Member
Jan 31, 2012
1,540
807
Lomita
OnePlus 8 Pro
Samsung Galaxy S21 Ultra
sykoj82 said:
V2.05s interactive governor immediately freezes after applying it in stweaks..did the same thing last version too. Other than that it's a good kernel.
2.05Ns version interactive works fine
Click to expand...
Click to collapse

Yes something is up. I started playing with my nightmare and sleepy govs and started.getting SODs. Back on 1.48s and no problems, Its strange that 2,0.5s will work fine for almost 2 day's then just start crashing.

Sent from my SGH-I777 using Tapatalk 2
 
  • Like
Reactions: lingarajug
S

spexwood

Senior Member
Feb 13, 2011
1,339
432
twcobra said:
.... Mass storage works ok to as long as you are not to spoiled turning on mass storage the old fashion way lol....
Click to expand...
Click to collapse

Unlike some people, I AAAAAMMM picky about my UMS auto mounting. My phone plugs into my car and it plays the MP3 files from the external memory card. I hate having to fiddle with the phone in the bright sun, and would much rather prfer simply plugging the phone in and just going.

Is this mounting issue being corrected? Please tell me that it is!
 
auTONYmous

auTONYmous

Senior Member
May 25, 2009
134
38
Spinergy02 said:
Having no problems with 2.0.5 hyper active and conservative sleep governors on cm10.1 nightlies. Well, no problems so far!

Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse

I'm getting SODs that others are reporting while using hyper/conservative. I haven't played with any voltage settings, just default profile on 2.0.5 with cm10.1 nightlies

Sent from my SGH-I777 using Tapatalk 4 Beta
 
Spinergy02

Spinergy02

Senior Member
Dec 29, 2012
303
76
Honestly, though, if he's so disappointed he should just switch to a different kernel. No one is forcing us to use any particular kernel. I know I personally chose this one because it always worked so much better than any of the others.

Sent from my SGH-I777 using xda app-developers app
 
  • Like
Reactions: razen_kain, xpakage and sykoj82
razen_kain

razen_kain

Senior Member
Jan 28, 2013
2,563
2,484
Carthage
sykoj82 said:
Now you just ticked off a wonderful dev that has devoted his time "for free" making our dying i777 the best as possible...

Aj: please don't leave us, we all appreciate your work!
Click to expand...
Click to collapse

+1!!!

Don't go Aj. Please don't forget about the other 99% of us who won't even run a rom without your kernel. We love and appreciate all your hard work

Sent from my SGH-I777 using Xparent Red Tapatalk 2
 
  • Like
Reactions: dagwoodmash, hoopas, sykoj82 and 1 other person
erad1

erad1

Senior Member
Dec 3, 2010
1,422
776
MiamiBeach
OnePlus 6
First off, I am not pointing out any one particular post here. I have held back from posting about the people claiming issues but this is too much, It's a small number and usually the same few. I have run this kernel since helping with testing the 7.x.x versions. I've never had any issues with any release unless it was something AJ acknowledged having left something out which was always immediately corrected. These issues seem to be after people start tweaking this profile and that profile and Lord knows how many conflicting control apps/scripts they have installed or leftover. Or after flashing 4.2.2 ( SOD's/un-mounted SD card anyone?) OS which is still unofficial and still not designed for this phone. Unless you are running the kernel at the default settings like I have, you are bound to find a profile environment your particular chipset will not like. It's not a kernel issue as much a compatibility issue, I think. So use your head and instead of complaints or constantly reposting the same problem, run at default or move on.
 
Last edited:
W

Whizzpopper

Senior Member
Apr 4, 2012
381
243
Iowa
I believe the problem is that many users do not know when they are in over their heads and developers don't realize that users don't have a clue what they're doing. Since this is a developers forum and portal, it should be the users' responsibility to assume they haven't got a clue and bring issues they encounter to devs from that perspective. So the offending poster in this case should have said, " have a problem with xyz, what am I doing wrong," not "I have a problem with xyz, what you (AJ) are doing is wrong."

FWW I've learned through trial and error that with kernels you can't usually just change a governor without changing other settings as well. Developers don't always know or have time to work out what the optimal settings are for your particular preferences. What that means is, as is said so often on XDA, you have to work it out yourself. If AJ might reconsider leaving, I'd recommend starting a separate thread in the help section where users can post what they have found to be optimal settings. They can also help troubleshoot there. Definite bugs that can be reproduced by more than one user can be reported here. When users come whining to this thread first, their posts can be summarily deleted and ignored, and offending users can be warned.
 
  • Like
Reactions: jonsvibe, samprocat, ehard24 and 3 others
Naddict

Naddict

Senior Member
Nov 23, 2011
8,510
13,862
28.2S, 92.1W
Wow...just wow...

Firstly, and I know nothing of the developer and/or his/her work. But if they pulled their work, then that is up to them. Nowhere in this thread do I see the dev posting the reasons why the work was pulled, maybe to enhance or move on? I have no clue, but what I do know is that the childish banter and flaming that followed, and has thus been cleaned, is absolutely, positively NOT development..

Next time, report the posts, don't get involved in troll comments and commentary. That is a colossal waste and leads to infractions, and infractions lead to bans, and then, no development for you at all.

Move along folks, nothing more to see here.
 
  • Like
Reactions: SteveMurphy, Hoho1997, lingarajug and 14 others
AJ Newkirk

AJ Newkirk

Senior Member
Aug 19, 2007
1,652
3,959
Lexington, KY
d-h.st
Back by popular demand....


Changes include:
WiFi toggle bug is a thing of the past (has been for weeks now on AJK actually...)
Slide2Wake is now disabled while you are on a call.
New Mali V2 drivers - best graphics performance on the i777.
S4 code implemented for WiFi.
TONS of other changes...


AJK v3.2 NoSwap
Use with Cooked, AT&T factory ROMs such as I777UCMD8
MD5 Sum: fc9f93ff8cc127a5b77cbb798b919564

AJK v3.2 AOSP
Use with CM10.1, Slim Bean, PacMan, etc.
MD5 Sum: 1062db511af8fbf18c9a48cdf317f8cb

AJK v3.2 Samsung
Use with ShoStock 3 or any other Samsung ROM ported from i9100 to i777
MD5 Sum: bc0d9e8132c64998c2e9c33ffdff6e82


Installation:
Code: 
[LIST=1]
[*]Wipe cache
[*]Wipe dalvik
[*]Install AJK - [COLOR="Red"]DO NOT REBOOT YET...[/COLOR]
[*]While still in recovery, go to advanced and reboot recovery
[*][B][U][I]After recovery has been restarted[/I][/U][/B], go into kernel specific options and Reset ExTweaks profiles
[*]Fix permissions in recovery
[*]Reboot and enjoy the new kernel
[/LIST]



Please remember that this kernel was created for my friends & family to use, and I also share it here.

You are not obligated to use it. If you do decide to use this kernel, that does not give you the right to be disrespectful.

Please report any bugs that you find, and be sure to include a logcat...otherwise your "issue" will be ignored.

Reporting something 1 time is sufficient. If someone else has already reported it, you do not need to re-report the same bug.

Remember the 2 primary rules here on XDA are:

1) Be respectful.
2) Use the search functions - both the XDA search and Google.

If you are experiencing issues that no one else is having, then it is not the kernel at fault....
 
Last edited:
  • Like
Reactions: fatbas202, damdamcogtu, lilmagnus and 32 others
ehard24

ehard24

Senior Member
Aug 29, 2012
154
340
Aynor
Welcome back man! The slide to wake on a call has been a headache for me and my chubby cheeks! Thx for giving us a chance to try it out!


Edit....Have been runnin this for over 3 hrs now and I must say the beast is back! Not one issue and feels rock solid and smooth! Not sure if it would be affected (prolly not) but I seem to even have better service now! An extra bar in most places and I've already been to several areas this morning....I'm doin cartwheels!!
Sent from my SGH-i777 using xda app-developers app
 
Last edited:
  • Like
Reactions: AJ Newkirk
Status
Not open for further replies.

Similar threads

shoman94
[RoM][XWLSZ-4.1.2-JB][SHOstock3 v4.0] [10/13/13]["RiseUp Edition"]
Replies
8K
Views
1M
N
newbiedroidlover
ktoonsez
[KERNEL] Siyah - JELLYBEAN - ICS [v4.3.3] "One kernel to rule them all!"
Replies
4K
Views
714K
L
love4k21
SeanHacker
  • Locked
[Rom] AOKP(Jellybean 4.2.2) | Task650 (6.24.13) AT&T
Replies
29K
Views
4M
SeanHacker
SeanHacker
shoman94
[RoM][XWLPY-4.0.4-ICS]SHOstock2 v6.2 [11/13/2012](FINAL)
Replies
10K
Views
1M
V
Vintage144
E
[Firmware][SGH-I777][JB][4.1.1] CyanogenMod 10 preview | USER THREAD
Replies
4K
Views
780K
S
sam3000

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 180
    AJ Newkirk
    AJ Newkirk


    Imitated, but NEVER duplicated!
    Rock solid stability and great performance for your SGH-I777.


    Features:

    Full support for Kernel Screen Gestures Builder
    WIFI Driver ported from SG4
    New Mali V2 Video Driver
    Overclocking up to 1400 MHz
    Be very careful with voltage settings. UnderVolting usually causes bad things..
    Slide2Wake is now automatically disabled while on a call. (Modded for less battery drain)
    Native USB Tethering.
    Native Wi-Fi Tethering
    File systems support: Ext3/4, FAT32, NFS, CIFS, NTFS
    Added tweaks to increase I/O Speed.
    Added tweaks to increase CPU speed
    Removed all the debuggers
    Better picture quality thanks to camera tweaks
    BLN without Wakelock - see STweaks BLN tab to activate.
    Touch Keys Light change with the screen brightness
    MMC_CAP_ERASE not present
    Sound boost controls in STweaks.
    Added mdnie interface and made hardcore’s sharpness tweaks optional
    5 GPU FREQ Steps from 108Mhz to 520Mhz
    Ultra KSM from 3.9.y kernel.
    [/LIST]


    Installation Instructions:

    Wipe cache
    Wipe dalvik
    Install AJK - DO NOT REBOOT YET...
    While still in recovery, go to advanced and reboot recovery
    After recovery has been restarted, go into kernel specific options and Reset ExTweaks profiles
    Fix permissions in recovery
    Reboot and enjoy the new kernel



    AJK_Red_Boot_Logo.jpg

    NoSwap - for Cooked and AT&T stock JB
    MicSwap - for ShoStock3 and other ported i9100 ROMs
    AOSP - for any AOSP ROM, such as CM10.2


    AJK v4.9 NoSwap
    Dev-Host
    Goo


    AJK v4.9 MicSwap
    Dev-Host
    Goo


    AJK v4.9 AOSP
    Dev-Host
    Goo



    NOTE: Changelog information for builds prior to v3.2 was somehow deleted while the thread was closed (at my request...) for a short while.
    I will try to recover the lost changelog information and add it as I can.
    Changelog:

    v5.0 (in development)
    Updated ROM compatibility - now works on all current ROMs
    Fixed SoD when using ZZMOOVE as sleep governor
    Imported the latest Samsung ramdisk files
    Fixed an issue where profiles might be reset
    - Any further profile issue MUST be due to a ROM or rogue app issue.
    - The logs I have seen are indicating that the profile was deleted by something. Kernel is not capable of this...

    v4.9
    Fixed JB_Sound_Fix on Samsung based ROMs
    Fixed a small profile issue
    Fixed an issue with CPU grouping
    Improved ROM compatibility
    Misc fixes & tweaks
    New battery profile
    New performance profile - Highly recommended! Great performance & very good battery life!
    GPIO pin definitions fixed
    There's more but I forgot to write it down as I went...

    v4.8
    Small FileSystem tweak
    Improved ROM compatibility
    Disabled the boot logo for now

    v4.7
    Fixed various issues with CM10.1.3 RC2
    Sync'd CM10.x init files with CM sources
    Set ROOT to default ON for CM10.2
    Updated ZZMOOVE to v0.7d
    Set default profile sleep scheduler to BFQ
    New Battery profile, based on ZZMOOVE v0.7d
    New boot logo by Teknodad1974

    v4.6
    Tuned battery & performance profiles a bit
    Tweaked CortexBrain
    Fixed a small profile bug
    Updated ZZMOOVE governor
    -new ZZMOOVE governor is VERY smooth (smoothest gov I have found), uses slightly more battery than Hyper.


    v4.5
    Nice new boot logo by Teknodad1974
    Recovery background remains plain black to make it easier to read recovery text
    Fixed a small issue with recovery
    Added exFAT support
    Updated governors & i/o schedulers
    Updated profiles
    Updated Stweaks
    Added the Dorimanx implementation of CPU Voltage Groups. This will let people see why some phones UV easily and some cannot UV.


    v4.4
    Added support for Android 4.3
    Some code cleanup
    Tweaked touchscreen and display to improve smoothness

    v4.3
    Reverted part of the frequency cleanup as it caused a slight hesitation in the UI

    v4.2
    Bugfix - corrected CPU frequency table
    Boots & settles in much faster now

    v4.1
    Undervolting has been given a reprive thanks to topiratiko & samprocat
    Use UV with CAUTION and expect no support when using UV
    CPU frequency table has been tuned down to 6 primary frequencies for efficiency
    CPU voltages have been corrected in the profiles to account for the new frequency table
    Fixed mic swapping (MicSwap version only, obviously)
    Due to the changes made to the CPU frequency table and the CPU voltage table,
    it is CRITICAL that you follow the installation instructions exactly as outlined here.
    S959G users please ask for assistance from more experienced S959G users
    if you need assistance..
    PLEASE do not just ignore the need for profile resets!
    This version will start off slow (possibly VERY SLOW) and will speed
    up as it settles in. First boot can take a LONG time. This is both normal and expected.

    v4
    Project "SMOOTH UI" is now complete!
    You should notice better performance in every way. If not, you're doing something wrong!
    Fixed poor performance on Samsung ROMs - they did not like the OOM settings in v3.9 .
    Any trouble reports that do not include a logcat will be ignored.

    v3.9
    New boot logo by Teknodad1974
    Corrected the context on the Stweaks->Screen tab
    Removed BLN "blink" and "fade" options as they do not work on our phones
    Added a new "AJK Tweaked" OOM profile (Stweaks->Memory tab)
    Most people will see a nice improvement from the new OOM profile
    Slide2wake fix should be functional now
    Ad-Block is expanded & updated. This is a complete ad blocking solution now
    Ad-Block can be added/removes d in Stweaks->Other
    Ad-Block can be updated automatically via setting in Stweaks->Other

    v3.8
    AKA: THE ONE
    Nightmare has been tuned and should be much more stable now
    Added ZZMOOVE governor by ZaneZam (a great battery or sleep governor)
    New topiratiko tuned profile
    MAJOR smoothness improvements made by Project "SMOOTH UI"
    Re-added Touchscreen Sensitivity setting in Stweaks
    Added touchscreen revision detect button in Stweaks -> Screen
    Added additional touchscreen settings for different touchscreen type

    Many thanks to the testing team for working hard and relaying good
    information for me to build upon. :highfive:

    Special thanks to topiratiko for providing invaluable information
    and letting me bug him into the wee hours of the mornings
    testing new kernels. :good:


    v3.2
    WiFi toggle bug is a thing of the past (has been for weeks now on AJK actually...)
    Slide2Wake is now disabled while you are on a call.
    New Mali V2 drivers - best graphics performance on the i777.
    S4 code implemented for WiFi.

    I will have to populate this later as it somehow got removed while
    my thread was locked for maintenance.


    Some suggested reading:
    A Comprehensive (but not by any means definitive) Guide to Wakelocks


    Please remember that this kernel was created for my friends & family to use, and I also share it here.

    You are not obligated to use it. If you do decide to use this kernel, that does not give you the right to be disrespectful.


    Please report any bugs that you find, and be sure to include a last_kmsg and/or logcat...it is impossible to troubleshoot without it.

    y6e6y6et.jpg

    Reporting something 1 time is sufficient. If someone else has already reported it, you do not need to re-report the same bug.



    Remember the 2 primary rules here on XDA are:

    1) Be respectful.
    2) Use the search functions - both the XDA search and Google.



    If you are experiencing issues that no one else is having, then it is not the kernel at fault....



    Special thanks to:
    Entropy512 (CyanogenMod, kernels, much more for the community)
    Gokhanmoral (Siyah Kernel)
    Dorimanx (Dorimanx Kernel)
    @razen_kain for all the feedback & support (to everyone here)
    @mr-cook for all he does for the SGSII community
    @topiratiko for his tireless testing, great feedback & support and the topiratiko profile
    @4-2ndtwin for his tireless testing, great feedback & support
    @samprocat for his tireless testing, great feedback and tremendous support.

    And a special thanks to all the donators. Your donations are greatly appreciated!


    ​

    ROM Devs:

    I request that anyone who includes this kernel in a firmware release does the following out of courtesy:
    1) Link to this thread
    2) Clearly indicate in your firmware changelog which AJK version is included in your firmware release. This lets users identify whether a fix is present in the kernel they're using or not.

    Kernel source new repo available here.
    Use the "master" branch.
    Compiled using the supplied linaro 12.x toolchain.
    View
    35
    AJ Newkirk
    AJ Newkirk
    Back by popular demand....


    Changes include:
    WiFi toggle bug is a thing of the past (has been for weeks now on AJK actually...)
    Slide2Wake is now disabled while you are on a call.
    New Mali V2 drivers - best graphics performance on the i777.
    S4 code implemented for WiFi.
    TONS of other changes...


    AJK v3.2 NoSwap
    Use with Cooked, AT&T factory ROMs such as I777UCMD8
    MD5 Sum: fc9f93ff8cc127a5b77cbb798b919564

    AJK v3.2 AOSP
    Use with CM10.1, Slim Bean, PacMan, etc.
    MD5 Sum: 1062db511af8fbf18c9a48cdf317f8cb

    AJK v3.2 Samsung
    Use with ShoStock 3 or any other Samsung ROM ported from i9100 to i777
    MD5 Sum: bc0d9e8132c64998c2e9c33ffdff6e82


    Installation:
    Code: 
    [LIST=1]
[*]Wipe cache
[*]Wipe dalvik
[*]Install AJK - [COLOR="Red"]DO NOT REBOOT YET...[/COLOR]
[*]While still in recovery, go to advanced and reboot recovery
[*][B][U][I]After recovery has been restarted[/I][/U][/B], go into kernel specific options and Reset ExTweaks profiles
[*]Fix permissions in recovery
[*]Reboot and enjoy the new kernel
    [/LIST]



    Please remember that this kernel was created for my friends & family to use, and I also share it here.

    You are not obligated to use it. If you do decide to use this kernel, that does not give you the right to be disrespectful.

    Please report any bugs that you find, and be sure to include a logcat...otherwise your "issue" will be ignored.

    Reporting something 1 time is sufficient. If someone else has already reported it, you do not need to re-report the same bug.

    Remember the 2 primary rules here on XDA are:

    1) Be respectful.
    2) Use the search functions - both the XDA search and Google.

    If you are experiencing issues that no one else is having, then it is not the kernel at fault....
    View
    28
    AJ Newkirk
    AJ Newkirk
    Touchscreen Tuning process

    1. Open ExTweaks
    2. Select Screen tab
    3. Go to "Batt Move Filter", increase it BY ONE and apply
    4. Test it, if it still stutter, increase ONE STEP ONLY and apply
    5. Repeat step 4 till the stutter/jitter is gone. Don't set it too high as it'll result the touchscreen capability lost
    6. If "Batt Move Filter" is OK without any jitter again, connect your charger and go to "Chrg Move Filter"
    7. Repeat step 4 till you satisfied and again: DON'T SET IT TOO HIGH, ONLY INCREASE TILL THE JITTER/STUTTER IS GONE

    Do this at your own risk!
    If you lost the touch capability caused by too high value then you will need to reset ExTweaks profile in recovery.

    I can say its different for each device as the test shown:
    -My S2: Batt Filter 16 & Chrg Filter 50, stutter/jitter gone completely, below that value the screen is stuttering/jittering.
    -My son's S2: Batt Filter 13 & Chrg Filter 46, stutter/jitter gone completely, below that value the screen is stuttering/jittering.
    -My daughter's S2: Batt Filter 14 & Chrg Filter 48, stutter/jitter gone completely, below that value the screen is stuttering/jittering.
    View
    26
    AJ Newkirk
    AJ Newkirk
    Dev-Host links have been added for AJK v4.9 downloads. Many thanks to those who have provided mirrors after Goo completely screwed up my stuff.

    Looks like next year will be yet another interesting one for SII users.

    Here's hoping that all of you have a safe & happy holiday season!
    View
    26
    AJ Newkirk
    AJ Newkirk
    New version

    Siyah-i777 v7.0.1

    fixed in-call audio
    View

New posts