[CUSTOM][KERNEL] MerrukTechnology Kernel 2.0 PRE-FINAL, For Samsung Galaxy Y GT-S5360

Search This thread
By:
Advanced…
#Henkate

#Henkate

Senior Member
Feb 1, 2012
3,484
3,124
28
フェアリーテイル
Maroc-OS said:
Really not understand what you mean :) can you explain?


not yet but will work on that

sorry not remember our discussion about that, can you resend that to me?

i don't know the default configuration :) but if you give time i can carefully read the codes and respond to you.

-------------------------------

Now About the Hack :

when i compared the kernel messages from stock kernel and my kernel i found no different in the output logs, so i will add some debug codes to the sources and try again.

Thanks for you All.
Click to expand...
Click to collapse


Good luck!:)
 
Maroc-OS

Maroc-OS

Retired Recognized Developer
Mar 16, 2012
886
3,631
Casablanca
www.merruk.com
funny95 said:
Good luck!:)
Click to expand...
Click to collapse
Thank you :)
sanyokkua said:
I mean in the CyanogenMod color swapped? You do not tried this rom in the your phone?

sorry if my english bad.
Click to expand...
Click to collapse
Sorry Not Tested :)
hell_lock said:
I mean that what are you currently working on??

Sent from my GT-S5360 using XDA
Click to expand...
Click to collapse
Yep am Working on it :) but i found the issue :) the header file from samsung doesn't have the full declarations for the 30 FPS and 1080p things so :) am looking for a new header file from other devices for our camera :)
 
  • Like
Reactions: vaibhavlokare111, maxxinn, #Henkate and 4 others
Maroc-OS

Maroc-OS

Retired Recognized Developer
Mar 16, 2012
886
3,631
Casablanca
www.merruk.com
premolikeshtc said:
any updates so far
Click to expand...
Click to collapse

I sent a request to the official constructor for the datasheet and waiting for a repley from them.

BTW, Our Hardware Support the 1080p but Samsung has puted a lower camera in that device, The camera doesn't support 1920*1080 Full HD 1080p, Only 1280*1024 So i Try the HD Format (720p) but if you read here you can found some information about 720p is better then the 1080p in some cases.

http://fr.wikipedia.org/wiki/720p
http://fr.wikipedia.org/wiki/Haute_..._l.27est_pas_.281080i.2C_1080p.2C_720p.29_.3F

Let me see your Opinions.
 
Last edited:
  • Like
Reactions: evanlocked, #Henkate, leodasal2 and 1 other person
yusuv

yusuv

Senior Member
Mar 29, 2012
460
48
Jakarta, Kalimalang
Maroc-OS said:
I sent a request to the official constructor for the datasheet and waiting for a repley from them.

BTW, Our Hardware Support the 1080p but Samsung has puted a lower camera in that device, The camera doesn't support 1920*1080 Full HD 1080p, Only 1280*1024 So i Try the HD Format (720p) but if you read here you can found some information about 720p is better then the 1080p in some cases.

http://fr.wikipedia.org/wiki/720p
http://fr.wikipedia.org/wiki/Haute_..._l.27est_pas_.281080i.2C_1080p.2C_720p.29_.3F

Let me see your Opinions.
Click to expand...
Click to collapse

im my opinions sir, we need a great support for hd games..
sound quality, pics quality...

Sent from my GT-S5360 using Tapatalk 2
 
R

rifad20

Senior Member
Feb 14, 2008
108
14
Calicut
Maroc-OS said:
I sent a request to the official constructor for the datasheet and waiting for a repley from them.

BTW, Our Hardware Support the 1080p but Samsung has puted a lower camera in that device, The camera doesn't support 1920*1080 Full HD 1080p, Only 1280*1024 So i Try the HD Format (720p) but if you read here you can found some information about 720p is better then the 1080p in some cases.

http://fr.wikipedia.org/wiki/720p
http://fr.wikipedia.org/wiki/Haute_..._l.27est_pas_.281080i.2C_1080p.2C_720p.29_.3F

Let me see your Opinions.
Click to expand...
Click to collapse

so sooner we can have full hd files on our youngss.. :D
 
Maroc-OS

Maroc-OS

Retired Recognized Developer
Mar 16, 2012
886
3,631
Casablanca
www.merruk.com
rifad20 said:
so sooner we can have full hd files on our youngss.. :D
Click to expand...
Click to collapse
not yet am working on it :)
yusuv said:
im my opinions sir, we need a great support for hd games..
sound quality, pics quality...

Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
yep that's what we need but GPU Datasheet isn't here :( and we cannot modefie the libs (OpenGL ES, OpenMax EGL files :( we can do only improvments in the kernel.
deathnotice01 said:
UNLESS WE CAN GET THE SOURCECODE FROM BROADCOM THIS AINT GONNA HAPPEN!

now,
who wants pie?
Click to expand...
Click to collapse

who are talking about broadcom??? are you reading what am writing or ???
One : am waiting Datasheet not Sources.
Two : am waiting the constructor of our camera not broadcom.

Regards.
 
Maroc-OS

Maroc-OS

Retired Recognized Developer
Mar 16, 2012
886
3,631
Casablanca
www.merruk.com
anasdcool71 said:
Me...me...!! But i would prefer cm7 for my phone over it....!

Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
if you don't have drivers then you don't have CM :)
premolikeshtc said:
Plz do anything to get the datasheet, be hacking into their system or the other.
Click to expand...
Click to collapse
:) not all lol but i will fight for it :)
ronnieryan said:
that would be pretty difficult and would cost you a lot if you get caught..anyway i think they should give the datasheet..
Click to expand...
Click to collapse
yep rennie but am talking about the camera constructor not broadcom (i have already asked broadcom for datasheet without response).

------------

see you soon.
 
  • Like
Reactions: maxxinn and leodasal2
yusuv

yusuv

Senior Member
Mar 29, 2012
460
48
Jakarta, Kalimalang
Maroc-OS said:
not yet am working on it :)

yep that's what we need but GPU Datasheet isn't here :( and we cannot modefie the libs (OpenGL ES, OpenMax EGL files :( we can do only improvments in the kernel.
who are talking about broadcom??? are you reading what am writing or ???
One : am waiting Datasheet not Sources.
Two : am waiting the constructor of our camera not broadcom.

Regards.
Click to expand...
Click to collapse
So, with the GPU datasheet you will improve it?
Great!


Sent from my GT-S5360 using Tapatalk 2
 
Maroc-OS

Maroc-OS

Retired Recognized Developer
Mar 16, 2012
886
3,631
Casablanca
www.merruk.com
yusuv said:
So, with the GPU datasheet you will improve it?
Great!


Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
yep if we got them :( no body can give you broadcom datasheet for now. but we still searching ;)
premolikeshtc said:
how far rasberry pi can resemble with our crap y.
www.raspberrypi.org/archives/1700
Click to expand...
Click to collapse
raspberry has the same hardware :

Processor & Graphic but the sources are closed they gives some binary files (Libs) ready for use but no sources or infos.
 
R

rifad20

Senior Member
Feb 14, 2008
108
14
Calicut
Di@mond said:
IF the Ace "i" has the same hardware as the SGY then......

CPU = Broadcom BCM21553 ARM11 832 MHz processor, ARMv6
CPU Data sheet = http://www.datasheetarchive.com/BCM2155*-datasheet.html

GPU = Broadcom BCM2763 VideoCore IV LPDDR2 128MB
GPU Data sheet = http://www.datasheetarchive.com/Bcm2763*-datasheet.html

According to Broadcom the processor/gpu is capable of encoding and decoding at full 1080p resolution.

I found this website of the SGY being overclocked to 900mhz.... he/she also supplies the kernel that he/she modified....if its any use to us.

http://advanced-droid.blogspot.co.uk/2012/07/galaxy-y-s5360-overclock-900mhz.html
Click to expand...
Click to collapse

This is the datasheet?? :-?
Broadcom Announces 1080p Multimedia Processor with Breakthrough Mobile Power-Performance

New Broadcom® BCM2763 VideoCore® IV Processor Features 1080p Video, 20 Megapixel Photos and 1 Gigapixel Graphics in an Ultra-Low Power 40 Nanometer Design

IRVINE, Calif., Dec 15, 2009 -- Broadcom Corporation (Nasdaq: BRCM), a global leader in semiconductors for wired and wireless communications, today announced its next generation multimedia processor that delivers industry leading performance and lower power in the top multimedia categories for mobile devices. Using 40 nanometer (40nm) CMOS process technology, the new Broadcom® BCM2763 VideoCore® IV multimedia processor provides even higher integration, smaller footprint size and lower power consumption than 65nm designs.

With the higher integration and significant power savings from 40nm CMOS process technology, the BCM2763 multimedia processor features the most advanced mobile high definition (HD) camcorder and video playback, up to 20 megapixel digital camera and photo image processing, and 1 gigapixel 2D/3D graphics rendering for a world-class gaming experience. HD video, 3D games and high resolution 20 megapixel pictures can be displayed at top quality on full-sized HD televisions and monitors using an on-chip industry standard HDMI interface. Additionally, the BCM2763's highly integrated architecture reduces bill-of-materials (BOM) cost to help drive sophisticated multimedia features into more affordable handsets.
Click to expand...
Click to collapse
still we have a low end phone..:(
 
Last edited:
Maroc-OS

Maroc-OS

Retired Recognized Developer
Mar 16, 2012
886
3,631
Casablanca
www.merruk.com
Hacked Param.lfs

rifad20 said:
This is the datasheet?? :-?

still we have a low end phone..:(
Click to expand...
Click to collapse

nope :( not the data sheet and this post is based on my infos on wikipedia and other thread on general section, the 900Mhz is one of my kernels.

am still testing the new features here and i have news :

Hacked param.lfs :)
* new boot logo
* custom CMDLINE
* debug_level=Heigh
* and more ...

lets wait for other news ....


see you soon
 
  • Like
Reactions: leodasal2, #Henkate, Chucrute and 1 other person
You must log in or register to reply here.

Similar threads

AvijitGhosh82
  • Locked
[ROM][KERNEL][ICS/Jelly Bean mod] JELLYBLAST V3 for Galaxy Y [ OTA5 ADDED ][03/02/13]
Replies
4K
Views
2M
The-Captain
The-Captain
Doky73
  • Locked
[Stock][ROM][Odin] Galaxy Y S5360 flashable firmware packages
Replies
2K
Views
2M
xHausx
xHausx
CarlDeanCatabay
  • Locked
  • Poll
[ROM][KERNEL] Hyperion Project - Hyperion 7.x | Pre GM now available!
Replies
3K
Views
544K
The-Captain
The-Captain
pratyush.creed
  • Locked
••• Creeds' Rom v2.5 ••• [DEV][ROM] [2.3.6]
Replies
2K
Views
499K
ggnatomen
ggnatomen
repencis
[System & Kernel] Repencis v3.5 Advanced Rom
Replies
2K
Views
464K
pustinjak
pustinjak

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 254
    Maroc-OS
    Maroc-OS
    " MerrukTechnology Kernel Final Version 1.0.8 "
    ​

    Hello Everybody's.

    I am New in XDA-DEV this is my first day (I HAVE 3 WEEK'S NOW) & my first post was a NEW CUSTOM KERNEL for Samsung Galaxy Y in a thread on General Section, it was just a test. but we to got a perfect kernel for this Device.

    We Need Testers and devs to help with ideas or anything you can.

    Let's talk about this kernel.

    -----------------------------------------------------------------​

    For now we dont have much but we can do more :

    --------------------

    FEATURES :

    Swap Support.

    Some Bug Fixes.

    CPU Spy App Fix.

    Game-Port Modules.

    Graphic Engine Driver.

    Security Patches Added.

    TUN/TAP, Virtual Adapter.

    Added USB CORE Support.

    HID, EHCI, OHCI, Support.

    VibeTunz (TM) Technology.

    MERRUK Tempfs for SU Binary.

    EXT2/EXT3 & EXT4/JBD2 support.

    SD-EXT Support, System & Recovery.

    CIFS Support. (Mount Shared Folders).

    NETFILTER Compatibility with DROIDWAL.

    Recouvery in Read/Write mode & [ADB Root].

    Added IO Scheduler. (Deadline, CFQ, VR, SIO).

    BLMUNLOCK Added, & a Script to run it at boot.

    INIT.D Support & Auto Create init.d in /system/etc.

    BusyBox Support PreInstalled (Busybox binary in /sbin).

    Root Support [ADB Root] & PreInstalled (SU binary in /sbin).

    Added MFC, (MULTI FORMAT CODEC) Firmware From Samsung.

    Multi-language Module Support For UTF-8 on CIFS Mount Shares.

    /Cache and /Data, Can be mounted as EXT4. (/System Need's Fixes).

    Add The Permanent Modded / Fixed CloclWorkMode Recovery. (V.5.8.0.2).

    Mount SDCARD WITH EXT4 FS Supported (You Need to Format it With EXT4).

    New J4FS SUPPORT. (We Can Mode it to have our new optimized j4fs rw filesystem).

    Modules for VPN/IPSec Support. (IPsec AH, IPsec user configuration interface, IP Tunneling, )

    Added CPU Governor Feature. (SmartassV2, Conservative, Ondemand, Powersave & Userspace, etc...) (Not All of them for now)

    ------------------------​

    DEBUG SCRIPTS ADDED FOR SYSTEM & RECOVERY.

    FIXES SCRIPTS ADDED FOR SYSTEM & RECOVERY.

    IMPORTANT MODULES LOAD'S NOW AT BOOT.

    Plus A Lot of Other Improvements & Fixes.
    Click to expand...
    Click to collapse

    -----------------------------------------------------------------​

    TODO LIST :

    USB OTG Driver.

    A2SD Complete Support.

    DROIDWALL App Fully Working.

    Overclock/Undervolt Tricks Support.

    Modded ZYGOTE Service for Detailed Catlog.

    Increase Internal Memory UP, /Data now is on SDCard.
    Click to expand...
    Click to collapse

    Please give me a list of toto's for the next versions,

    -----------------------------------------------------------------​

    HOW TO INSTALL :

    Instructions :

    1 : Put the Ext4.zip on Your SD-Card. (SKIP IT : NOT RECOMMENDED FOR NOW)
    2 : Extract The Content of Sustem.zip to the Root of your SD-Card (DRIVE_LETTER:/system). LINK ADDED BELOW.
    3 : Flash the Kernel Via Odin (YOU CAN DO WHAT YOU WANT THERE IS MANY OTHER METHODS).
    4 : Boot into CWM Recovery.
    5 : Install Ext4.zip.(SKIP IT : NOT RECOMMENDED FOR NOW)
    6 : Wipe DATA & CACHE (NOT NEDDED BUT PREFERABLE).
    7 : Don't Worry @ The First Boot, You Need To Reboot TWICE.
    8 : Check the Stability & Speed.
    9 : ENJOOOOOOY.

    FOR THE 1.0.8 VERSION AND ABOVE:

    You will see a new folder on the rot of the SD Card Called (scripts)

    this folder is for the scripts you want add them into init.d folder.
    all you need is put the scripts you want into it and reboot twice.

    -----------------------------------------------------------------​

    IF YOU GOT PROBLEMS PLEASE GO BACK TO THE STOCK KERNEL : http://www.mediafire.com/?2o40bhqa6dfnfzt

    -----------------------------------------------------------------​

    OLD WORKING VERSIONS : SOME VERSIONS ARE DELETED FOR SECURITY REASONS (Borocken)

    ALPHA VERSIONS :

    Version 0.5.2 ALPHA.
    Version 0.5.7 ALPHA.

    RC VERSIONS :

    Version 0.6.80 RC.
    Version 0.7.00 RC 10.(1Ghz but Lag)
    Version 0.7.50 RC 20.(900Mhz FIXED SD_CARD Probleme)
    Version 0.8.50 RC 10.(A2SD, SU, Busybox, Data on SD. - Steel need fixes -)

    RC/CWM VERSIONS :

    Test Version CWM.
    Version 0.8.70 RC 80, Have CWM.

    PRE-BETA VERSIONS :

    Version 0.9.90 PRE-BETA.
    Version 0.9.98 PRE-BETA.

    BETA/CWM VERSIONS :

    Version 1.0 BETA 1.
    Version 1.0 BETA 2.

    FINAL VERSIONS :

    Version 1.0.0 FINAL.
    Version 1.0.1 FINAL.
    Version 1.0.5 FINAL. (have a bug need to wipe data ;))
    Version 1.0.8 FINAL. (Sdcard not mount at boot for all roms)
    Version Pre-2.0 FINAL. (Awesome Great Stable Version)

    For the Pre-2.0 see here : http://xdaforums.com/showpost.php?p=25942858&postcount=2735
    And Here the beginning : http://xdaforums.com/showthread.php?t=1550065&page=270



    -----------------------------------------------------------------​

    NEEDS :

    Any help can add stability and features to this kernel.

    -----------------------------------------------------------------​

    INSTRUCTIONS :

    Please See The Post #3 (Thank you ronnieryan).

    -----------------------------------------------------------------​

    I WILL UPDATE THE LINKS LATER :

    Ext4.zip Download it from here : http://xdaforums.com/attachment.php?attachmentid=965364&d=1332723141

    -----------------------------------------------------------------​

    USE IT AT YOUR OUWN RISK IT'S WORKS AND CONFIRMED FROM ALL TESTERS BUT ... :)​
    -----------​
    Please Report !!! and do not fogot THANKS.​

    -----------------------------------------------------------------​

    MERRUK TECHNOLOGY V.2.0 Kernel Sources at GitHub :
    https://github.com/Maroc-OS/Merruk-Technology

    Download From Attachement.
    View
    104
    Maroc-OS
    Maroc-OS
    [CUSTOM][KERNEL] MerrukTechnology Kernel v.0.1 ALPHA 1 For Samsung Galaxy Y GT-S5360.

    Reserved For Later.

    BTW: Some Infos About this phone.

    --------------------------------
    Samsung Galaxy Y
    (Model: GT-S5360)
    --------------------------------
    px

    Manufacturer Samsung Electronics
    Series Samsung Galaxy
    Successor Samsung Galaxy Pocket
    Type Touchscreen smartphone
    Dimensions 104 mm (4.1 in) H
    58 mm (2.3 in) W
    11.5 mm (0.45 in) D
    Weight 97.5 g (3.44 oz)
    Operating system Android 2.3.6 (Gingerbread)
    CPU Broadcom BCM21553 ARMv6 832 MHz processor
    GPU Broadcom BCM2763 VideoCore IV LPDDR2 128MB (neocore: 45.5fps), 1 gigapixel fill rate, 40nm
    Memory 290 MB RAM
    Storage 190 MB (158 MB user available)
    Removable storage 2 GB microSDHC (up to 32 GB)
    Battery Li-ion 1200 mAh
    Data inputs Multi-touch touch screen, headset controls, proximity, magnetometer, accelerometer, aGPS, and stereo FM-radio
    Display 240×320 pixels, 3.0 inch (133 ppi pixel density) TFT capacitive touchscreen, 256000 colors, 60Hz Refresh Rate
    External display Main Middle Button
    Rear camera 2 Pixel Megapixel, 1600×1200 Fixed Focus, 15 fps QVGA 320x240px video recording and stills, Panorama & Smile Shot
    Front camera None
    Connectivity 3.5 mm TRRS; Wi-Fi (802.11b/g/n); Bluetooth 3.0; Micro USB 2.0;
    ----------------------------
    Thank's to the Moderator ;) (PG 101)
    View
    99
    ronnieryan
    ronnieryan
    ​
    Press Thanks For Maroc-OS & Rate 5 Stars
    ​
    Files Needed :

    Odin 3 v1.84
    Odin 3 v1.85
    Samsung SGY Drivers
    Click to expand...
    Click to collapse
    Versions:
    Test Kernel
    Alpha v0.1
    Alpha v0.5.2
    Alpha v.0.5.7
    V0.6 RC 80
    V0.7 RC 10
    V0.7.50 RC 10
    V0.7.50 RC 20
    V0.8.50 RC 10
    V.1.0_Beta_1
    V 1.0.0
    V 1.0.1
    V 1.0.5 [For Flashing via mai77 method here's the boot.img ONLY]
    V 1.0.8 [For Flashing via mai77 method here's the boot.img ONLY This Kernel Needs the 1.0.8 System]
    MerrukTechnology 2.0
    Merruk 2.5(boot.img only)
    Click to expand...
    Click to collapse


    Flash Kernel Via CWM by mai77(My Prefered Way
    Download the following and place to the Root Of SD card
    CWM
    KernelUpdate.zip
    Ext4
    MerrukTechnology v2.0 Pre-Final(boot.img ONLY)
    System 1.0.8
    (Note : For system 1.0.8 it contains "system" folder, extract that folder and place in root of SD card)

    Now we are all set
    1. Turn off phone and boot into CWM
    (Note: To boot into CWM press Vol Up, Home, and Power at the same time and in the stock recovery choose update from zip and select the CWM.zip)
    2. Once in the CWM recovery, simply choose install from zip and select KernelUpdate.zip
    (Note : Kernel Update.zip looks for a boot.img file in SD card and flashes it)
    3. After successful kernel up press power to return to CWM
    4. Press Reboot now, and your kernel is updated
    5. Reboot twice and it will automatically delete the system folder in SD card
    6. Repeat step 1 and select install from zip, this time choose the Ext4.zip
    7. Press power to return to CWM and Press Reboot now
    Click to expand...
    Click to collapse

    OR

    INSTRUCTIONS :
    Short PDA Flashing Guide
    - download the .tar file
    - install Kies, or Samsung driver pack
    - download Odin3 1.84 or 1.85 (download links above)
    - stop Kies
    - stop all active ADB sessions
    - start odin
    - power off Your SGY
    - boot into download mode
    - Press Vol Down, Home, and Power at the same time
    - When (about 5 sec) Warning screen appears, release Volume Down and Power, then (a bit later) Home
    - press Vol Up (You'll get Odin mode screen)
    - in the PDA field, browse for the kernel tar
    - leave all other fields and checkboxes default!
    - connect your phone, You must see yellow 0:[COMxx] in the first ID:COM and "Added" in the message box
    - Start flashing by the START button.
    - flashing will start immediately, see the progress in the message box, and progress bar on the phone
    - Wait 1-3 minutes, until green PASS! in the upper left
    - SGY will reboot, leave it as is for 2-5 minutes until startup finishes
    Click to expand...
    Click to collapse

    Apps Needed
    A2SD
    Droidwall
    No-Frills CPU
    CPU Tuner
    Click to expand...
    Click to collapse

    If Ever Problem Occurs, Just Flash Back To These Kernels
    Stock XXLA2
    Stock DXLA1
    Terma Kernel
    Test Kernel
    Click to expand...
    Click to collapse

    How To Get Logcat For Windows User
    bumslayer said:
    Here's how to do a logcat, providing you have installed android sdk.

    1. Turn off your phone (if stuck, just remove the battery).
    2. At your command prompt, do "adb logcat > logresult.txt".
    3. Plug your phone to your usb and power it.
    4. After at least 1-2 minutes or until the phone has fully booted up, terminate your logcat session (ctrl+c).

    By then you have created a logresult.txt which contains your logcat entries. PM your results to the devs.
    Click to expand...
    Click to collapse
    Click to expand...
    Click to collapse
    View
    59
    Maroc-OS
    Maroc-OS
    Instructions/Infos & Kernel Updated See Topic.

    EliTSamsunG said:
    Sir Maroc,I Dont have Use System 1.0.8 to v2,its make any issue?

    Amazing PowerSave Governor ;P
    Click to expand...
    Click to collapse
    ---------------------------
    z3ro00 said:
    in 2.0 do i need to use the system.zip of 1.0.8 ?
    Click to expand...
    Click to collapse
    ---------------------------
    NanoSurfer said:
    I'm not using it, I just flashed the kernel using faqbly method and that's it. Not sure about custom roms though
    Click to expand...
    Click to collapse
    ---------------------------

    Flash the Kernel with any method you want (Odin, Mai77, or Faqbly).
    For better speed :) install ext4.zip
    For better performance :) install system-1.0.8.zip
    Reboot Twice :) Enjoy.

    If you have a fresh install (Stock Rom) you need to do it (Install System.zip from 1.0.8) :) but if you have an old rom that have already the system folder (Kernel Modules) installed on it it's not a problem.
    View
    51
    Maroc-OS
    Maroc-OS
    MT Kernel Developer Edition 4 ( v.2.5 )

    Hello Guys :) Uploading The New Kernel :)

    This One are relly Good :) you need to test all things and see if the performance are increased :)
    Notice : Superuser.apk removed :) so if you wana root the device just put you new files in :

    /system/rooting

    we support : su, busybox and Superuser.apk in that folder

    For ext4 this one are really do the job :)

    To convert you STL blocks you need to do this :

    1) - Make a Nandroid Backup.
    2) - Install the attached EXT4 Zip file.
    3) - Restore your Nandroid Backup.
    4) - Flash the PDA.merruk.tar (cause the nandroid backup will flash back your old kernel)
    5) - Enjoy The New Speed :)


    This File do 2 things for ext4 :), & reset the custom bin counter (Bin file used from docky Thanks for him), and finally Flash the kernel.
    Convert the blocks to ext4 filesystem, and tune the filesystems with ext4 specs :)
    You can easely turn you system to ext3/2 to have more speed (ext2 is better cause no journal there so it turns fast recording to the checks found in internet)

    For Kernel if you used the EXT4 Zip File you are done, if not flash the PDA file attached via Odin.

    After Installing please let the system take the time nedded to full booting and reboot twice to take effects :)

    Have a Good Day :)

    Please Your Reports improve the kernel, so send them :)

    EDIT:

    guys please read carfully it's not for noobs.

    if you wanna convert your blocks the partitions system/data/cache will be formated and converted to ext4, the Ext4_Converter-signed.zip attached also flash the kernel.

    if you don't wanna be in ext4 FS just flash the attached kernel as pda (PDA.merruk.tar).
    View

New posts