Source code
http://www.multiupload.com/4ECGKXPYJW
[Steps]
Extract above tar.gz in / and then
Download CodeSourcy Compiler from here
https://sourcery.mentor.com/sgpp/li...rm-none-eabi/arm-2011.03-42-arm-none-eabi.bin
Install above C compiler then issue following command in source directory extracted above
make ARCH=arm tsunagi_defconfig
make -j16 ARCH=arm CROSS_COMPILE=/arm-2011.03/bin/arm-none-eabi- zImage
When this steps complete you will get zImage in arch/arm/boot folder
New Image Android 2.2.1 with Audio , WiFi + AP mode , Bluetooth
http://www.multiupload.com/HFZUWFNX0I
Just extract above file to \Storage Card and go to \Stroage Card\2.2 click on CLRCAD (4-5 times) and then click on Haret
(In this version there is no need to copy nvram.txt to \Storage Card)
New Image Android 2.3.5 with WIFI and Bluetooth
http://www.multiupload.com/QUT30LPS8K
extract to SD card and then go to \Storage card\fathom
Click on clrcad 4-5 times and then click on haret
For wifi it is must to copy \windows\nvram.txt to \Storage Card
if it is difficult to copy from windows folder use attached one
[Note : In this version i have disabled fb console so you will not see any text while booting so wait at least wait 5 min if none appears do soft reboot and then retry]
I have worked on Toshiba kernel and ported that kernel for LG fathom.
As of Now following Works
GSM (Partially)
Battery
TouchScreen
3D
Audio (only through front speaker)
Keypad (Need some work with Fn key)
Battery
USB (start haret while usb connected)
USB Mass Storage and ADB
wifi
Not working
Bluetooth
Vibrator
Issue( Solved now)
1) Screen will flicker when USB cable was removed. workaround is to set any live wallpaper.
How to run
extract files on Storage card
goto /Storage Card/tg01
click 4-5 times on clrcad
and then run haret-pre-0.5.3-20100625_144828-QSD8250-ONLY.exe
http://www.multiupload.com/GK0FCMUVX6
for wifi extract following file and put replace zImage with this one and copy bcm4329.ko to /system/lib/modules also copy \windows\nvram.txt to \Storage Card
Link for wifi
http://www.multiupload.com/DOEAA1JXCD
http://www.multiupload.com/4ECGKXPYJW
[Steps]
Extract above tar.gz in / and then
Download CodeSourcy Compiler from here
https://sourcery.mentor.com/sgpp/li...rm-none-eabi/arm-2011.03-42-arm-none-eabi.bin
Install above C compiler then issue following command in source directory extracted above
make ARCH=arm tsunagi_defconfig
make -j16 ARCH=arm CROSS_COMPILE=/arm-2011.03/bin/arm-none-eabi- zImage
When this steps complete you will get zImage in arch/arm/boot folder
New Image Android 2.2.1 with Audio , WiFi + AP mode , Bluetooth
http://www.multiupload.com/HFZUWFNX0I
Just extract above file to \Storage Card and go to \Stroage Card\2.2 click on CLRCAD (4-5 times) and then click on Haret
(In this version there is no need to copy nvram.txt to \Storage Card)
New Image Android 2.3.5 with WIFI and Bluetooth
http://www.multiupload.com/QUT30LPS8K
extract to SD card and then go to \Storage card\fathom
Click on clrcad 4-5 times and then click on haret
For wifi it is must to copy \windows\nvram.txt to \Storage Card
if it is difficult to copy from windows folder use attached one
[Note : In this version i have disabled fb console so you will not see any text while booting so wait at least wait 5 min if none appears do soft reboot and then retry]
I have worked on Toshiba kernel and ported that kernel for LG fathom.
As of Now following Works
GSM (Partially)
Battery
TouchScreen
3D
Audio (only through front speaker)
Keypad (Need some work with Fn key)
Battery
USB (start haret while usb connected)
USB Mass Storage and ADB
wifi
Not working
Bluetooth
Vibrator
Issue( Solved now)
1) Screen will flicker when USB cable was removed. workaround is to set any live wallpaper.
How to run
extract files on Storage card
goto /Storage Card/tg01
click 4-5 times on clrcad
and then run haret-pre-0.5.3-20100625_144828-QSD8250-ONLY.exe
http://www.multiupload.com/GK0FCMUVX6
for wifi extract following file and put replace zImage with this one and copy bcm4329.ko to /system/lib/modules also copy \windows\nvram.txt to \Storage Card
Link for wifi
http://www.multiupload.com/DOEAA1JXCD
Attachments
Last edited: