[Q] TWRP Flashable Zip. XXUFNB9 Modem I9505

Search This thread

matty1491

New member
Mar 15, 2014
4
0
Hi guys,

Is there anywhere I can get the XXUFNB9 modem for the i9505 (flashing via. using TWRP recovery)?

I have tried flashing using this file, and flashing via Odin, but it won't flash at all.

Any ideas where I can find this?
 

Joku1981

Senior Member
Jun 4, 2012
3,084
912
If anyone else is having issues with the baseband not changing, do this:
  1. Reboot into Download Mode and use Odin
  2. Untick Autoreboot
  3. Click in AP/PDA and Flash MODEM
  4. Take off the battery 1 minute and put it in again
  5. Turn it on into Download Mode
  6. Untick Autoreboot in Odin
  7. Flash Modem once more
  8. Once done, unplug then reboot device manually (like step 4)
  9. Turn on the phone normally
  10. New modem working :highfive:
 
  • Like
Reactions: matty1491

matty1491

New member
Mar 15, 2014
4
0
Odin Error when flashing modem...

If anyone else is having issues with the baseband not changing, do this:
  1. Reboot into Download Mode and use Odin
  2. Untick Autoreboot
  3. Click in AP/PDA and Flash MODEM
  4. Take off the battery 1 minute and put it in again
  5. Turn it on into Download Mode
  6. Untick Autoreboot in Odin
  7. Flash Modem once more
  8. Once done, unplug then reboot device manually (like step 4)
  9. Turn on the phone normally
  10. New modem working :highfive:

Hi there,

Thanks for the idea, tried this, however, I get a fail in Odin, and it Soft Bricks my device. I have to reflash the Recovery to get the phone booting up again... Here is the Odin log...

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> NB9_modems_GSM_LTE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> NON-HLOS.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> modem.bin
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

And on the GS4 screen (in download mode)...

ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Custom
SYSTEM STATUS: Official
KNOX KERNAL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE enabled
START[224,1440]
BAR[240,1440]


Just for the record, I am using this ROM, and I can't make or receive calls, or play any sounds at all.
 

matty1491

New member
Mar 15, 2014
4
0
Fixed!

Hi guys!

All fixed, very weird though. ODIN says the flash in the previous post failed, and my device was soft bricked... yet the sound and phone calls work now. Very weird indeed! Thanks for the help though Joku1981 :)
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    If anyone else is having issues with the baseband not changing, do this:
    1. Reboot into Download Mode and use Odin
    2. Untick Autoreboot
    3. Click in AP/PDA and Flash MODEM
    4. Take off the battery 1 minute and put it in again
    5. Turn it on into Download Mode
    6. Untick Autoreboot in Odin
    7. Flash Modem once more
    8. Once done, unplug then reboot device manually (like step 4)
    9. Turn on the phone normally
    10. New modem working :highfive: