[ROM][4.3.1][JLS36I][PRE-ALPHA] Unofficial CyanogenMod 10.2 Builds

Status
Not open for further replies.
Search This thread

kD

Senior Member
Jan 20, 2012
1,176
2,945
San Diego, CA
logo-cid.png

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (JB), which is designed to increase performance and reliability over stock Android for your device.

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/

CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

Unofficial build of CyanogenMod 10.2 (Android 4.3.1) for the LG-P350



What's working:

  • Display
  • Camera (photos, camcorder & panorama)
  • Video playback
  • Touch
  • WiFi
  • USB-tethering
  • Mtp/ptp
  • Bluetooth
  • OMX
  • ADB
  • Mass Storage
Not working:

  • Orientation Sensors
  • Small things

Download
SuperAlpha#1:
http://www.androidfilehost.com/?fid=23329332407593294

GAPPS : No gapps for now first let us make it usable ;) Not a daily driver

Install instructions:

Wipe data and cache
  • Flash the CM10.2 zip
  • Reboot
  • boot into recovery mode
  • Install gapps
  • Reboot

Upgrading from earlier version of CyanogenMod 10.2:

  • Boot into Recovery
  • Flash CM10.2 zip
  • Reboot

PLEASE DONT MIRROR MY DOWNLOAD LINKS

Screenshots:



nYmK0Hz.png

9fznvGb.png

ikBuB7S.png

E4JullN.png

aczlBpk.png

PiPWvux.png



Source:
https://github.com/PecanCM
https://github.com/CyanogenMod

Thanks to:

  • AndroidARMv6 Team
  • CyanogenMod Team
  • antdking,iptux,osamabinary,RonG(PecanCM)
  • and everyone who's been working on CM10.2
IRC SUPPORT:
Join us in #teamhacklg on the Freenode IRC network.

If you like my hard work and want to give a small amount of money for me to buy a bear, please click the "Donate to me" button under my username. Otherwise I would be grateful if you can click the "Thanks" button on the bottom right of this post. Thanks :)
 
Last edited:

kD

Senior Member
Jan 20, 2012
1,176
2,945
San Diego, CA
Faq's

Q: there is no reboot options in power menu, Why?
A: Go to the Settings -> Developer options -> Advanced reboot

Q: The 'Developer and Performance options' from 'settings' are gone. Where are they?
A: Touch the 'Build number' seven times in 'about phone'. Then they will appear.
 
Last edited:

Shaka96

Senior Member
Apr 14, 2013
342
184
Messina
Bootloop.
When i can i will try to give you a logcat.
So good work.
You are the man dude ;)

Sent from my LG-P350 using XDA Free mobile app
 

Shaka96

Senior Member
Apr 14, 2013
342
184
Messina
Hope to seen cm10.2/cm11 working for our device.
Good luck :thumbup:

Sent from my LG-P350 using XDA Free mobile app
 

Shaka96

Senior Member
Apr 14, 2013
342
184
Messina
Hello everyone,
Most things are now fixed in CM10.2 excluding Headphones and Native tethering and few small things.
But currently our kernel is really ready for this. I'm working on kernel for now. So I will release the next update after updating the kernel. Please be patient ;)

#PEACE

kD

hot time to get update?
As we have to wait before trying the update?
I can not wait *-*
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 18
    logo-cid.png

    CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (JB), which is designed to increase performance and reliability over stock Android for your device.

    Code:
    #include <std_disclaimer.h>
    /*
    * Your warranty is now void.
    *
    * I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed. Please
    * do some research if you have any concerns about features included in this ROM
    * before flashing it! YOU are choosing to make these modifications, and if
    * you point the finger at me for messing up your device, I will laugh at you.
    */

    CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

    Unofficial build of CyanogenMod 10.2 (Android 4.3.1) for the LG-P350



    What's working:

    • Display
    • Camera (photos, camcorder & panorama)
    • Video playback
    • Touch
    • WiFi
    • USB-tethering
    • Mtp/ptp
    • Bluetooth
    • OMX
    • ADB
    • Mass Storage
    Not working:

    • Orientation Sensors
    • Small things

    Download
    SuperAlpha#1:
    http://www.androidfilehost.com/?fid=23329332407593294

    GAPPS : No gapps for now first let us make it usable ;) Not a daily driver

    Install instructions:

    Wipe data and cache
    • Flash the CM10.2 zip
    • Reboot
    • boot into recovery mode
    • Install gapps
    • Reboot

    Upgrading from earlier version of CyanogenMod 10.2:

    • Boot into Recovery
    • Flash CM10.2 zip
    • Reboot

    PLEASE DONT MIRROR MY DOWNLOAD LINKS

    Screenshots:



    nYmK0Hz.png

    9fznvGb.png

    ikBuB7S.png

    E4JullN.png

    aczlBpk.png

    PiPWvux.png



    Source:
    https://github.com/PecanCM
    https://github.com/CyanogenMod

    Thanks to:

    • AndroidARMv6 Team
    • CyanogenMod Team
    • antdking,iptux,osamabinary,RonG(PecanCM)
    • and everyone who's been working on CM10.2
    IRC SUPPORT:
    Join us in #teamhacklg on the Freenode IRC network.

    If you like my hard work and want to give a small amount of money for me to buy a bear, please click the "Donate to me" button under my username. Otherwise I would be grateful if you can click the "Thanks" button on the bottom right of this post. Thanks :)
    14
    Hello everybody,
    I've got some good news for you. I'm almost done with CM10.2 on LG P350. Most things are working fine excluding headphones and few armv7 things. All credits to PecanCM(Actually RonG) for fixing up CM10.1. he's hard work is the reason we're getting 4.3 and soon 4.4 too
    I'm going to release two version
    one with .35 kernel
    and other one with 3.0 kernel.
    Do let me know by using both of them which one seems more better and finely working for you all!
    Currently my computer is not working due to heart attack to it so i'm going get it fixed in a day or two by going under bypass open heart surgery. Will release the update as soon as i get my pc working. Thank you all for believing in me and supporting me! CM11 work will be started as soon as we finish up with RC on CM10.2.

    P.S Don't say thanks press it xD

    Thanks and regards,
    kD
    7
    when i flash zip file, it gives me a series of string error like " getprop("ro.product.device") == "p355" || getprop("ro.build.prodE: unknown command [uct")] and the last is "...path/namefile.zip (Status 7)". it's only a mine problem?

    I prefer using CWM 5.0 or CWM 6.0.

    1) flash with cwm 6.0.30
    2) rom in 1st page is stuck at bootanimation. Wait for a next release

    Sent from my LG-P350 using XDA Free mobile app

    I know if you want it to boot. You can flash another kernel. No worries next version will be fine to use!

    Hey Keyur what about eta?

    Sent from my LG-P350 using XDA Free mobile app

    First CM Rule No ETA's but still i expect next update in a week. Actually Kernel ain't ready yet! Need to work on it!

    Ecco a te:
    http://www.mediafire.com/?m25ur9xesx4kxy5
    Flasha dalla tua recovery

    Sent from my LG-P350 using XDA Free mobile app

    Please use only english only here in XDA. You may receive infraction for using other languages here!


    #PEACE
    6
    CHANGELOG


    PRE-ALPHA 12-05-14


    • Initial release
    6
    Faq's

    Q: there is no reboot options in power menu, Why?
    A: Go to the Settings -> Developer options -> Advanced reboot

    Q: The 'Developer and Performance options' from 'settings' are gone. Where are they?
    A: Touch the 'Build number' seven times in 'about phone'. Then they will appear.