[AOSP/AOKP-KERNEL] *27.06.12* Fluxi XX Kernel ICS [xxTweaker App, Touch CWMR, OTA]
- Thread starter xator91
- Start date
- Status
This kernel is awesome both on cyano 9 and on omega AOKP too..try the last one is great 
---------- Post added at 09:30 PM ---------- Previous post was at 09:29 PM ----------
There is the related thread of the rom mate ..take a look
---------- Post added at 09:30 PM ---------- Previous post was at 09:29 PM ----------
There is the related thread of the rom mate ..take a look
Click on the banner in my sig and read the features guide also in my sig
Thanks!
I'll go for this one.
BLN with Tasker
Here is my BLN project for Tasker.
What it does?
1) On notification -> check if proximity sensor is covered -> if not, enable BLN, (blinking, breathing…) according to the notification.
2) Enable BLN (steady) if battery full.
More explanation in the zip file...
Mate!! Care to share your tasker settings please??
Sent from my SGS2 - SlimICS Rom & Syiah Kernel
Here is my BLN project for Tasker.
What it does?
1) On notification -> check if proximity sensor is covered -> if not, enable BLN, (blinking, breathing…) according to the notification.
2) Enable BLN (steady) if battery full.
More explanation in the zip file...
Last edited:
Does omega aokp has problem with video on rc5.1.
Sent from my GT-I9100 using Tapatalk 2
I keep coming back to this kernel xxtweaker made it so easy to customize all the cpu gpu voltages and settings. But I still have to find the best setting for deep sleep lol love the usage time on it though.
D
Deleted member 308374
Guest
Thanks a lot mate, great idea!! Can't wait to have the time to play with your profile and see how you built it
will report back later on!Sent from my SGS2 - SlimICS Rom & Fluxi Kernel
I've updated the zip in my previous post with a "BLN Test" Task, when you open it, click on the "play" button down right then turn off the screen. After 4 sec it'll show the 3 BLN patterns: Steady, Blinking, Breathing.
Those who have already imported the project can just unzip and import the attached “BLN Test” task.
Cheers
Those who have already imported the project can just unzip and import the attached “BLN Test” task.
Cheers
check the title, first page, search...still no answer? Oh well
Sent from my GT-I9100 using XDA App
It's i the title, ICS ASOP/AKOP only...
So it's neither for Sammy based roms neither for GB...
Edit: here is the link for the GB version, but is only for CM7, MIUI an Oxygen...
Last edited:
Thank you for the answers. I read few posts back saying that FLuxi kernel exists also for GB so I was hoping for a link.
Best regards.
Best regards.
Thank you for the link but too bad that FLuxi is not also for Sammy GB. I heard many good things about it.
Best regards.
As much I like rc4 upgrading to rc5 is not bad either kept my settings from 4 and still works on 5 but I feel 5 works better for me as I get better results.
Sent from my GT-I9100 using XDA
Sent from my GT-I9100 using XDA
- Status
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
143FLUXI KERNEL ICS I9100 *27.06.12*
Original Thread Link: http://www.android-hilfe.de/kernel-...ernel-ics-xxtweaker-app-xxtouch-recovery.html
Official Discussion Thread (Non-development/settings/battery life) : http://xdaforums.com/showthread.php?t=1732028
LATEST RELEASE XX.02-beta9
Download:
CWM ZIP: Fluxi CWM XX.02-beta10
Odin TAR: Fluxi ODIN XX.02-beta10
xxTweaker Download:
xxTweaker-0.3.9_rc2.zip45Kernel Update Fluxi ICS XX.03-beta1
CWM ZIP: fluxi-kernel-sgs2-XX.03-beta1.zip
Odin TAR: fluxi-kernel-sgs2-XX.03-beta1.tar
Update xxTweaker v0.4.0_beta1
OTA or direct download: fluxi-xxTweaker-0.4.0_beta1.apk
Changelog:
- Kernel: Rebase on top of CM kernel, code review, cleanup
- Kernel: Add vr I/O scheduler
- Kernel: Limit GPU voltage back to 800mV, a lower limit may cause Mali kernel errors
- Kernel: Use LED button brightness for constant and blinking BLN
- Kernel: USB: Use 4 storage pipeline buffers
- Kernel: USB: Increase vbus draw
- Ramdisk: Update recovery
- Ramdisk: Use cool Android Jelly Bean charging gfx
- Ramdisk: Install ntfs-3g binary
- xxTweaker: Update to v0.4.0_beta1
- xxTweaker: Automount NTFS drives to {internal SD-Card}/usbdisk
- xxTweaker: Move fix permissions task to thread, fixes UI freeze
- xxTweaker: OTA: Don't download updates if file is already present
- xxTweaker: OTA: Uninstall and install tweaker .apk instead of flashing a zip, personal settings are persistent
- xxTweaker: Disable vibration settings, it's in CM now
37Kernel Update Fluxi ICS XX.02-beta10
Slomo may be actually two bugs, which explains why it happened much less with beta9. So those observations regarding the mmc driver were not totally unfounded while the conclusion may have been a bit off. Let's see what happens.
CWM ZIP: fluxi-kernel-sgs2-XX.02-beta10.zip
Odin TAR: fluxi-kernel-sgs2-XX.02-beta10.tar
Changelog:
- Kernel: Fix typo in ext4 driver that may have caused those slowdowns on wakeup and unlock
- Kernel: touchscreen: Optionally flash LED buttons on touch, not in the tweaker app yet, if you need it *now*, echo/write time in ms into /sys/class/sec/sec_touchscreen/tsp_flash_timeout, e.g. for one second
echo 1000 > /sys/class/sec/sec_touchscreen/tsp_flash_timeout - Fileserver: On download instead of "download.php" correct filenames are saved
32Kernel Update Fluxi XX.02-beta4
This update is only needed for the new led backlight level (= "0") to avoid users reporting their bln was broken.
CWM ZIP: fluxi-kernel-sgs2-XX.02-beta4.zip
Odin TAR: fluxi-kernel-sgs2-XX.02-beta4.tar
Update xxTweaker v0.3.9_beta5
This is a monster update (at least for me), now we're having a feature freeze.
OTA or direct download: fluxi-xxTweaker-0.3.9_beta5.zip
Changelog:
- kernel: keyboard: cypress: Use standard voltage for constant/blinking bln, with very low voltages, the user might wonder why "bln does not work"
- kernel: Upstream patches from CM9 repo and more smaller patches
- ramdisk: Update CWM recovery, add "Power off" option in Advanced menu (user request)
- xxTweaker: System: Rewrite LCD-Density part to catch unxpected user settings
- xxTweaker: System: Reset fuel gauge option (user request)
- xxTweaker: Display: Rewrite touch config logic
- xxTweaker: BLN & LED: New "Level 0" for the LED button backlight, helps as workaround to keep LED buttons effectively off
- xxTweaker: BLN & LED: New 1 minute timeout for notifications (user request)
- xxTweaker: CPU: On governor change, reload saved user settings for the selected governor. So now it's possible to have individual settings for each governor - nice!
- xxTweaker: CPU: Remove read only value sampling_rate_min from settings in ondemand and conservative
- xxTweaker: CPU: Fix Bus Frequency up threshold value on reload after reboot
- xxTweaker: CPU: Fix on changing governors, governor list reports the actually selected governor
- xxTweaker: New settings administration. Save, restore, manage and reset your settings. As it is a new function that required much more than 1000 lines of code and a lot of detail work (and as a sidenote is the killer feature in ExTweaks Pro that costs you $$$), there may be small errors. If errors occure, please supply logs and report what exactly happened before failure.
