WM6.0 upgrade for the most inexperienced WM5.0 HTC prophet user.

Search This thread

dionysos77

Senior Member
Jan 19, 2007
347
28
47
Hi Friends,
I'm a very very fool and inexperienced QTEK S200 user.
I have never tried ROM update upto now.
Can any one guide me to update my QTEK S200 from WM5.0 to WM6.0 step by step.

Assume that I just know how to read and push the buttons.

Let me introduce my QTEK S200 to you.

ROM version: 2.20.7.21.WWE
ROM date: 7/10/06
Radio Version:02.40.21
Protocol Version: 4.1.13.20
ExtROM Version:2.20.7.101

IPL:2.20.0001
SPL:2.20.0001

I haven't done any modifications on locks and etc.
I don't know if it is cid locked or not.
I know that it is not gsm locked.

Thank you for you patience and time wasted for me and the guys like me.

You can send "step-by-step" guide to my e-mail if you want.
dionysos.savas@gmail.com
 

cr0ssy

Senior Member
Aug 4, 2006
88
2
wow I didn't know there was a 2.20 prophet ipl around^^

if you take the smart crossbow rom:

1. hardreset (camera and recorder button und reset)
2. when you are back in align screen, (the screen were you have to klick on crosses on the display :p) you leave it there and connect it to the computer
3. in the upcoming active sync window you press cancel to stay in guestmode
4. extract all the files from the exe you downloaded it into a folder
5. run upgraderom.bat or similar
 

dionysos77

Senior Member
Jan 19, 2007
347
28
47
Could you please locate the .exe to be downloaded.
And places to download upgraderom.bat or similar applications.

Be sure I know NOTHING about upgrading.
Please behave like,
you are on the phone with a 12 yearsold child.
And you are trying to teach that child to safely land on a airbus. :)





wow I didn't know there was a 2.20 prophet ipl around^^

if you take the smart crossbow rom:

1. hardreset (camera and recorder button und reset)
2. when you are back in align screen, (the screen were you have to klick on crosses on the display :p) you leave it there and connect it to the computer
3. in the upcoming active sync window you press cancel to stay in guestmode
4. extract all the files from the exe you downloaded it into a folder
5. run upgraderom.bat or similar
 

dionysos77

Senior Member
Jan 19, 2007
347
28
47
And than it is getting confusing again.
The first link sent was very clear and easy to apply.
But the suggested link is 11 pages long threath with again so much problems etc.
What I try to do is to figure out comleted, step by step installation guide.

For example:
1-download xxxx.zip from www.xxxx.com
2-download yyyy.exe from www.yyyy.com
3-download zzz.cab , ttt.cab and kkk.cab
3-extract xxxx.zip to C:/xxxx you will have aaa.cab,bbb.dat and ccc.tmp
4-run yyyy.exe go file->open, select bbb.dat and open it.
5-.......
.....
....

Is there any body that can provide this information for newbies.


 

kenxu

Senior Member
May 30, 2006
102
0
New York area
Use the first page to get the rom . use the second link to fix the problems you have. I'm not sure why you have to run wm6 as a newbie? I think you better off stay on wm5 aku 3.x or 2.x its less bleeding edge, hence less bugs to worry about. I admit, once you start upgrade roms, you became hooked, you start try all kinds of roms, and at that point you wont be a newbie anymore. In case you will ask me where are the wm5 roms:

http://xdaforums.com/showpost.php?p=1166781&postcount=1

Enjoy
 

dionysos77

Senior Member
Jan 19, 2007
347
28
47
thanks this would be the best way I think.

Use the first page to get the rom . use the second link to fix the problems you have. I'm not sure why you have to run wm6 as a newbie? I think you better off stay on wm5 aku 3.x or 2.x its less bleeding edge, hence less bugs to worry about. I admit, once you start upgrade roms, you became hooked, you start try all kinds of roms, and at that point you wont be a newbie anymore. In case you will ask me where are the wm5 roms:

http://xdaforums.com/showpost.php?p=1166781&postcount=1

Enjoy
 

lo0m

Senior Member
Dec 1, 2006
98
0
Haarlem
I would write you a guide from heart, no problem. But the point is that every ROM has it's own installation-procedure!

Some use the upgrade.bat, while others use the RUU (ROMUpdateUltility.exe).
Some need to be installed from bootloader, other one's need to be installed from within the OS itself.

That's why everybody who wants to flash ROM's on his device should know the basics of flashing.
And all the basics can be found in the wiki, mentioned here before.

After learning the basics, choose a ROM you want to use.
Then you should start reading every topic related to this ROM from 1st to last post, like we all did when
we wanted to flash our first ROM!!
When you've read everything, you'll know exactly what to expect and what to do..
 

dionysos77

Senior Member
Jan 19, 2007
347
28
47
I decided to do so.
Even I have read related threads and deciden to open this thread to prepare a installation guide think it wont work because of the reasons that you mentioned.
I'll follow smart1's ROM page and after I belive in there is no fatal error on the rom I'll flash it to my prophet.
The only information that I neeed will be should I cid unlock my device or not.
I think I'll be able to find this info also.
:)
After all I'll prepare some guides for newbies for the ROMs that I used.
and add as new threads here and in my language for our forums.



I would write you a guide from heart, no problem. But the point is that every ROM has it's own installation-procedure!

Some use the upgrade.bat, while others use the RUU (ROMUpdateUltility.exe).
Some need to be installed from bootloader, other one's need to be installed from within the OS itself.

That's why everybody who wants to flash ROM's on his device should know the basics of flashing.
And all the basics can be found in the wiki, mentioned here before.

After learning the basics, choose a ROM you want to use.
Then you should start reading every topic related to this ROM from 1st to last post, like we all did when
we wanted to flash our first ROM!!
When you've read everything, you'll know exactly what to expect and what to do..
 

lo0m

Senior Member
Dec 1, 2006
98
0
Haarlem
I'll follow smart1's ROM page and after I belive in there is no fatal error on the rom I'll flash it to my prophet.
The only information that I neeed will be should I cid unlock my device or not.
I think I'll be able to find this info also.

You don't have to CID-unlock your device to flash (Prophet-)ROM's. Not the one's released here on xda-developers anyway.

grtz
 

mccune

Senior Member
Nov 21, 2005
2,678
50
www.mccune.nl
Should not be a problem by now posting the same post three times! :(

Hundreds of people have managed to flash their device. Experienced as well as newbies. It's a little anoying to look at the latest posts and fined some multiple times. Yours is not more important then any other one!

If you realy want to do something with your device that's far from standard you also have to be willing to feed yourself with tons of info. Sure everybody would like a DIY document in their mailbox. But who will be held resonsable when you do something you don't even have a clue off?

Further if you think the WiKi is not clear enough to real newbies, then contribute to this forum and place your info in the WiKi so you can help others, like we all try to do here ;)