It's still 4.4.2 with Android L Theme that needs to be applied.
I find the overall performance to be quite poor.
Going back to my previous build...
I find the overall performance to be quite poor.
Going back to my previous build...
Well, with a broken LCD and lots of patience, my ZP999 is back to life. The "surgery" went good and is "alive and kicking".
Good job! I looked into removing the motherboard just out of curiosity but didn't know how to remove the connectors to the volume rocker and camera / off buttons.
Before going my route with copper foil you might want to check out:
http://forum.zopomobileshop.com/foru...xtra=#pid22843
I'm still not entirely happy.
AndroiTS shows reliable fix and good reception but during navigation it seems the accuracy doesn't match the signal strength!
There are periods when there is a good fix reported but I'm still 'all over the place'.
Good luck!
I'm not able to get root in the way described here.
Problem is, that Flashtool expects a BIN-File, but the recoverys downloable in post1 are in IMG-Fileformat.
Usually I would push the IMG-File via ADB.
Does this work on Zopo 999 or do I brick my phone using ADB for this job?
Al my previous phones I did this with ADB.
As I wrote, I don't know, how to get a img on my phone, using flashtool while it expects a bin-file.
If I would know how, I could give it a try.
I try CWM 6.
But all howtos that I reader till now tell me, I have to choose the recovery.bin
So when FT expects a bin how will I be able to flash a img?
I compiled the first cm 12.1 rom but didn't boot im checking the problems in boot right now, but the recovery stock cm 12.1 work good, boot and install zips from internal storage and adb sideload too, so recovery cm 12.1 work all. So I think that system is ok, just need tweak the boot files to finish a first booteable cm12.1
Sorry a was a little busy, but im still develop cm12.1, im just trying to finish the init.rc to start testing the first cm12.1, im using the stock kernel, i dont like the source code from zopo they create more bugs than fix in each update, its crap, the source code has severals bugs and random restarts, gps give more problems, if my first cyanomoded work, i will do a new kernel, i will not leave this phone deadJuliotec are you still with us? I hope so! Anyway I have had problems with inversion of memories as if I put an external sdcard the phone take it as sdcard0 and the internal storage as sdcard1. I really don't know why because this problems persists even if I set internal storage as default storage in Settings-->Memory
Are there any fix? Or I did something wrong? Thank you in advance! ��