I have the same problem too. Also I have a terrible phone lag. If I call myself from another phone it takes about 10 seconds till my HD register incoming call. At that time the speker just make a sound like if you turn some speakers, it is just silent "plop". After 3-4 more seconds the melody starts to play. And if the phone is off it freeze. When I hang the other phone my HD is still playing for 6-10 more seconds. Than I have to reboot anyway as it is frozen.
Android 2.1 with HTC SENSE ON WVGA/VGA DEVICES !!(vga needs some fixs)
- Thread starter klinux
- Start date
I have the same problem too. Also I have a terrible phone lag. If I call myself from another phone it takes about 10 seconds till my HD register incoming call. At that time the speker just make a sound like if you turn some speakers, it is just silent "plop". After 3-4 more seconds the melody starts to play. And if the phone is off it freeze. When I hang the other phone my HD is still playing for 6-10 more seconds. Than I have to reboot anyway as it is frozen.
The wakeup problem has been there for a long time, not only this build.
It is probarbly the kernel that is causing this.
go to options then go to something like keyboard options(i don't know,i have the italian version)
progress status
hi guys sorry I didn't answer all your posts, as I write I'm trying to fix the rootfs to avoid 1st boot pb.(thx to beta testers, will add a list on 1st post, and still need raph800 one
)
so hold on a little, play with latest build with rootswithcalibration if it doesn't work try the latest git, u can still report the pbs on each one.
untill I fix it,
stay tuned
Klinux
hi guys sorry I didn't answer all your posts, as I write I'm trying to fix the rootfs to avoid 1st boot pb.(thx to beta testers, will add a list on 1st post, and still need raph800 one
)so hold on a little, play with latest build with rootswithcalibration if it doesn't work try the latest git, u can still report the pbs on each one.
untill I fix it,
stay tuned
Klinux
Last edited:
After you installed the keyboard go to the home page.
In the google search field, you first have to type a letter. Then you have to tap and hold on the search field. Now you can change keyboard.
I use Raph800 and battery life is pretty bad but I am running winmo, touchflo3d still. Im guessing that I shouldn't be running all of these :x
I get the message "The charging current is not enough for device power consumption. Please switch to AC adapter." It is plugged in to the AC adapter!
Last edited:
This message is due to the "battery fake" command added to the startup text. If you don't want this message and don't want your phone to permanently think it's charging, delete this part from the statup text.
To up the battery life, be sure to close apps before sleeping the phone. I can squeeze about 8-16 hours normal use out of my overclocked raph800.
acpuclock.oc_freq_khz=600000
add this to end of the cmdline of startup.txt
that's for 600mhz, default is 528 I think.
I don't think I have that in my startup.txt. I am using the startup.txt I used with Eclair. My phone doesn't constantly show that it is charging. Only when I plug it in.
Hello, i've tested android...
Great, but i've little problem...
the keyboard is little...in the corner of screen...
sorry for my bad english and sorry for my questions...
tnx in advance...
He included a new keyboard app in the androidapps folder for this reason. You need to go to your Android settings -> Language & keyboard
Turn on AnySoftKeyboard.
You also have winmo and touchflo still? Does overclocking hurt the battery life much?
Last edited:
Yes, my winmo is a nfsfan 6.5.5 using the genY dual-boot to get to android
Also klinux, the new modded rootfs locks up my raph800, the unmodded git one does not.
http://xdaforums.com/showthread.php?t=623792
not sure if it will help performance, but it will allow you to bypass fully loading windows and auto-boot android.
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
1As noone tried to fix android 2.1 codename Espresso, I tried and it works !!
working: (sorry Babijoe, I'm too lazy to write the whole list so I copy/paste it )
* Touchscreen:
* Vibration:
* Capacitive Buttons and Navigation wheel
* Radio
* GPRS
* Microphone works
* Charging
* Market
* Sound
* Gsensor:
* ramzswap
* Android system wide Mic support. Eg: Voice dialer works. Note: You must make a phone call first or play sound before it works for programs. (phhusson)
* Wifi
* did I forget something ? Flashplayer 10.1 of course !! it works but not smooth enough to watch movies !
* Bluetooth : turn ON/OFF pairs and A2DP works! but blac touchpad is desactivated and sound have echo of helicopter ! ALL CREDITS TO PHHUSSON
Not Working:
* Camera/videorecord
* GPS
DOWNLOAD LINKS :
Glemsom zImage kernel autobuild:
http://glemsom.anapnea.net/android/htc-msm-android/
or
zImage modules dirty (a.k.a. without debugging) it seems much faster:
http://balsat.hopto.org/
Base package:
contains startup without overclock cmdline, conf, additionnal apps, initrd, rootfs_3g_pb
http://xda.duttonbiz.com/Base_package/base_package0704.tar.gz
startup config :
contains startups with overclock cmdline
chech 1st post attachment
UPDATE rootfs autobuilds has wifi fix for rhod thx to [ACL] and phhusson
http://xdandroid.southcape.org/rootfs/
Rippped package 14/03/2010
http://www.sendspace.com/file/40t0rr
Rosie package UPDATE 23/04/2010
http://xda.duttonbiz.com/package_hero_rosie_23042010/system2304.sqsh
EDIT: cab install for rhod users thx to Reefermattness
http://xdaforums.com/showthread.php?t=627997
If you like my work please donate
GUIDE
iceman198 did a great step by step with screenshots on howto install this build u can check it here
http://xdaforums.com/showpost.php?p=6132485&postcount=1537
First boot takes about 10 min to boot so be patient
the OS will be smooth after that
CREDITS
thx to all developers that did the whole work and give us the chance to use android as a main OS on non supported HTC devices especialy phhusson, enatefox, nprussell, dzo, zenulator, Paul, [ACL], Chamonix, Stinebd, Makkonen, MrPippy, cr2, Markinus, Babijoe and anyone else who contribute to get this so far
thx to chkms, davidebeatrice, elroy944, kstephens98, Reefermattness, DracoLX for helping me correcting bugs.
thx to iceman198 for hosting my releases
This is from XDA and for XDA so fell free to mod it, or ask for help.
As I'm not a developer I did what I could to have a daily usable OS, so be indulgent
DONATORS
psycho_terror
g3rm0
OLDER RELEASES :
Rosie package UPDATE 19/04/2010
http://xda.duttonbiz.com/package_hero_rosie_19042010/system1904.sqsh
UPDATE 13/04/2010
http://xda.duttonbiz.com/package_hero_rosie_13042010/system1304.sqsh
UPDATE 07/04/2010 fix of market and boot issues
http://xda.duttonbiz.com/package_hero_rosie_07042010/system0704.sqsh
UPDATE 05/04/2010 fix of 3G connexion
http://xda.duttonbiz.com/package_hero_rosie_05042010/system.sqsh
UPDATE 04/04/2010 fix of settings force close
http://xda.duttonbiz.com/package_hero_rosie_04042010/system.sqsh
UPDATE 30/03/2010 REV B fix of htc apps
http://xda.duttonbiz.com/package_hero_rosie_30032010/system300320101revb.sqsh
UPDATE 30/03/2010
http://www.sendspace.com/file/kid8cp
rosie package 29/03/2010 HTC SENSE SIZED
http://www.sendspace.com/file/qmkfbq
rosie package 28/03/2010
http://www.sendspace.com/file/c89tnf
older releases
http://www.4shared.com/dir/32335779/5c5ec6f1/sharing.html
cheers
Klinux1screenshots and youtube video running htc sense
I know you guys you prefer see with your own eyes !
here we go :
thx to whitefalcon for the screenshots
video of this ROM running on WVGA device:
http://www.youtube.com/watch?v=IXd5WC2y6lQ
thx to tomanlam for the video
video of this ROM running on VGA device:
http://www.youtube.com/watch?v=C3kBzSMkX5Y
thx to fastrat350 for the video1changelog
05.03.10 changelog:
- as many of you was confused to what file to use under which folder,
I packed all the neccessary files on one archive see link above
- WIFI supported now
- boot sound removed (I reboot so much so it get me realy ignoyed)
- some mod on system files to support BT in the future
- disable HW3D as the new zImages causes problem booting the system on blackstone
08.03.10 changelog:
-added package with rosie (HTC Sense)
-moded the boot animation
-updated rootfs this should correct other devices keymaps
-added files to support bluetooth on future releases
09.03.10 changelog:
-moded the boot animation it's centered now
-added files to enable bluetooth
-rosie package will be updated later
15.03.10 changelog:
- phhusson corrected the bug with rhod it was a conflict with wifi I added two rootfs one is latest git (rootfs.img) and the second is rootfs with calibration.
- system is more ripped.
- rosie package from htc eris thx to ACL for the link it seems faster than mine, I test it apart some rosie reboots and market everything is fine I will decide which one I will use by default after your feedback
- I added a new file named custom.tar.gz; this file contains the first boot optimization of time so if u can compare how many time it take with and without it will be cool (if u use it with existant data.img it will erase your customizations so be aware )
- don't use custom.tar.gz with rosie package the system will not boot !
-added some apps from xandroid package thx to babijoee
16.03.10 changelog:
- added sms fix from rootfs git all credits to phhusson
- added some mods to fix wifi problem on rootfs git (diam/raph/blac/topaz) rhod owners should wait
I uploded two rootfs: rootfs3Denabled and rootfs3Ddiasbled
- use 3Denabled on diam/raph
- use 3Ddisabled on blackstone
- on tapaz/rhod u can try both and give feedback, cause I don't know if 3D is supported or no
19.03.10 changelog:
- merged rootfs with all fixes
- add auto 3D enable/disable by device
- 3G should be fine for all providers
20.03.10 changelog:
- rootfs for all devices rootfs.img 3D desactivated roll back to the newer ril=phone driver
- rootfs_3G_pbs for those who have problem with their provider (VODAPHONE) with old ril
21.03.10 changelog:
- 1st try to fix britghness
28.03.10 changelog:
- fix for britghness
- new system.sqsh from HERO thread it's more stable and as responsive as on my HERO, I test it during 7h no force close at all !! thx to nprussell for this jewel !!
- market fixed
- google sync fixed
- 2G / 3G switch works thx to phh it force close the phone but works after
- teeter works partialy give it a try it's slugish but as responsive as winmo's one
- 3D gallery works partially but slow
- hexagon home tabs works by tape power button on the main home tab but undersized
29.03.10 changelog:
- 1st htc sense package with sized htc apps thx to [ACL] for the hint to use htc desire apk and thx to paul for the htc desire rom
- it's an alpha version so your feedback will help to fix it
30.03.10 changelog:
- fix for setting
30.03.10 changelog:
- fix of all htc apps FC
- settings could not accessed now
04.04.10 changelog:
- fix of settings Force close
05.04.10 changelog:
- fix of 3G connexion
07.04.10 changelog:
- fix of 3G connexion
- fix of market issue
- fix of loop on boot screen
-wifi still don't work for me test please and post feedback
13.04.10 changelog:
- use eris drivers to make the system smoother and more responsive
- my blac heat way less than before please confirm from youe side
19.04.10 changelog:
1\ ROOTFS
- update rootfs to enable wifi on rhodium thx to [ACL] for his work please test and post feedback
2\SYSTEM
- use eclair drivers to make the system smoother and more responsive
- update bootanimation thx to La3bna and enable boot sound
- add WifiTether to test please my blac's wifi is screwed
23.04.10 changelog:
- use nearly all desire framework this correct a little graphic bug on unlock pattern
- use aderno200 drivers (desire 3d drivers) the only improvement untill now is visible on teeter 1st load1Hi
I downloaded the 3 files.
-eclairhero.user.conf
-rootfs.img
-system.sqsh
As I understand I use a haret.exe and startup.txt file from another build?
But what modules/zimage do I use?
the conf file, is it suppose to be directly in root of sd card or in a conf folder?
Also do I use only one fat32 partition?
can I use swap and ext2?
Thanks!!1Step-by-Step
I was once trying to figure this out so here is a step-by-step...as simple as I can make it:
1) Download base package from post #1.
2) Unzip to the root of your phone's SD card. Should look like this (image 01.jpg):
3) Go into the "STARTUP CONFIG" folder and find the STARTUP.TXT that is right for your device and move it to the root directory of the SD card. So now your root will look like this (02.jpg):
4) Download the latest system####.sqsh from post #1.
5) Rename it to just "system.sqsh" and move it to the root of your SD card.
6) Download the latest rootfs.img file from post #1, unzip it, rename it to "rootfs.img" if needbe and move it to the root of your SD card.
7) Now, you will want to check out http://glemsom.users.anapnea.net/android2/ and snag the latest zimage file and module file. Unzip them and put them on the root of your SD card. You will want to rename the zimage to just "zimage" (no extention).
So, the end result of your root directory should be something like this:
Now, to clean things up, you can delete the "STARTUP CONFIG" directory and the "rename_androidapps_after_1st_boot".
If you have apps you want on there, you can create a folder called "AndriodApps" and throw the apps in there and it will install them during boot up.
Now, just disconnect from your computer and open up file explorer on WinMo and run Haret...you should get two short vibrations and then your cookin!!!
Keep updating steps 4, 6, and 7 as needed.
Hope this helps!
If I forgot something, let me know and I'll update the post.
