[Q] Stuck in Download mode

0Weygand0 · Jun 12, 2014

I checked through the forums and didn't see anything that resembled my problem. My Note is stuck in Download mode. I tried to flash with ODIN but it says that I do not have a partition. I tried using the proper partition file and the stock re flash but it fails. Odin can read the tablet .

I'm sorry but I have no idea what I'm doing yet. The picture is what the tablet is stuck on. I was told by two repair shops that I would have to send it to Samsung to have it repaired.

nic.stl · Jun 15, 2014

Try this http://xdaforums.com/showthread.php?p=53214714

Envoyé de mon GT-N8010 en utilisant Tapatalk

0Weygand0 · Jun 22, 2014

This is what I got when I tried to do it....

Got the file for ODIN and tried to re flash....

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8013UEUCMI3_N8013XARCMI3_813049_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

Thats what it says in ODIN and then when I tried to flash the PIT...

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8013UEUCMI3_N8013XARCMI3_813049_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

I dont know what to do now....

norbarb · Jun 22, 2014

0Weygand0 said:
Got the file for ODIN and tried to re flash....

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8013UEUCMI3_N8013XARCMI3_813049_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

Thats what it says in ODIN and then when I tried to flash the PIT...

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8013UEUCMI3_N8013XARCMI3_813049_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

I dont know what to do now....

After restart it is going to download mode ? To restart press and hold power button for 30-45 sec. What model this is? You may use wrong firmware or PIT file. How did you get in download mode at first time?

nic.stl · Jun 22, 2014

0Weygand0 said:
Got the file for ODIN and tried to re flash....

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8013UEUCMI3_N8013XARCMI3_813049_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

Thats what it says in ODIN and then when I tried to flash the PIT...

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8013UEUCMI3_N8013XARCMI3_813049_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

I dont know what to do now....

you didn't flash the right pit file

take the one i give in my link

Envoyé de mon GT-N8010 en utilisant Tapatalk

---------- Post added at 10:20 AM ---------- Previous post was at 09:25 AM ----------

Flash this one http://xdaforums.com/attachment.php?attachmentid=1943965&d=1367957676

Envoyé de mon GT-N8010 en utilisant Tapatalk

0Weygand0 · Jun 22, 2014

PIT failed...

Flashing just the PIT...

<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

nic.stl · Jun 22, 2014

Which rom did you flash ?

Envoyé de mon GT-N8010 en utilisant Tapatalk

norbarb · Jun 22, 2014

0Weygand0 said:
Flashing just the PIT...

<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

How did you get to download mode at first time?

Swiping from dark side of Galaxy S5.

0Weygand0 · Jun 23, 2014

Daughter was watching netflix. And she came to me with it and it was on the download screen. She said that it restarted...and did that.

norbarb · Jun 23, 2014

0Weygand0 said:
Daughter was watching netflix. And she came to me with it and it was on the download screen. She said that it restarted...and did that.

It maybe problem with flash memory. I don't see info in download mode in top left corner. Did you try to restart?

Swiping from dark side of Galaxy S5.

0Weygand0 · Jul 3, 2014

I can't get to the screen where I can reset/ restart it. I've tried 4 or 5 diffrent flash methods and nothing works. And I've restarted using the hard restart button combo. It just keeps going back to that screen.

nic.stl · Jul 3, 2014

stupid question necessary to ask ?

Did you tick "repartition" in odin ?

Envoyé de mon GT-N8010 en utilisant Tapatalk

---------- Post added at 06:59 PM ---------- Previous post was at 06:57 PM ----------

nic.stl said:
stupid question necessary to ask ?

Did you tick "repartition" in odin ?

Envoyé de mon GT-N8010 en utilisant Tapatalk

Another question

What is your rom ?

Envoyé de mon GT-N8010 en utilisant Tapatalk

0Weygand0 · Jul 3, 2014

Yes its checked and I use the rom from

http://www.sammobile.com/firmwares/

nic.stl · Jul 3, 2014

I don't find the rom you named in this post http://xdaforums.com/showthread.php?p=53584261 in sammobile

Is it jelly bean or kitkat ?

Envoyé de mon GT-N8010 en utilisant Tapatalk

0Weygand0 · Jul 3, 2014

It's supposed to be jellybean 4.1 for the Note 10.1 GT-N8013

0Weygand0 · Jul 3, 2014

The top one in the screen shot.

Topics

Topics

[Q] Stuck in Download mode

0Weygand0

Member

Attachments

nic.stl

Senior Member

0Weygand0

Member

norbarb

Account currently disabled

nic.stl

Senior Member

0Weygand0

Member

nic.stl

Senior Member

norbarb

Account currently disabled

0Weygand0

Member

norbarb

Account currently disabled

0Weygand0

Member

nic.stl

Senior Member

0Weygand0

Member

nic.stl

Senior Member

0Weygand0

Member

0Weygand0

Member

Attachments

Similar threads

New posts