[25/08] Version 1.6.9 :
- Linux : Updated to
Linux 3.0.93 (fixed cache-l2 compilation error) :good:
- cypress : report led status via sysfs (CM10.2)
- CM10.2 as 2nd Rom : Fixed storage (internal & external sdcards working now !) (thx to
@DerTeufel1980 initramfs) :good: :good:
- Updated MIUI v5 Support (credits
@_polimorph_) :good:
- Wolfson : Forced mic level setting (still testing) :good:
- Better memory & zram management
- Updated ZZMoove to 0.7a (thx
@ZaneZam) :good: :good:
- Stweaks : Added missing zzmoove tunables
- Stweaks : Fixed custom bootanimation support (bootanimation.bin or bootanimation.zip to be placed in /data/local/)
- Some more kernel cleaning and tweaking
[15/08] Version 1.6.8 :
- Linux : Updated to
Linux 3.0.90 :good:
-
CM10.2 : Added
FULL support as
1st rom & HALF support as
2nd rom (
no external sdcard) :good: :good: :good:
- SELinux activated (permissive) on
CM10.2 as 1st rom
- Mali : Corrected utilization timeout value :good:
- Wolfson: (CM) Fixed equalizer not activating until running stweaks (enforced) :good:
- zram: minor tweak
- mmc: minor tweaks
- sio scheduler: performance tweaks
- Stweaks : Corrected (inverted) values of legacy mode in zzmoove tab (still disabled by default)
- Fixed cpu freq jumping beyond max freq (again and for good) :good:
- Ramfs: Add cm workaround for no audio on call (tinyplay silence)
PS : Actual testing shows performance increase, low battery drain and reduced heating ... :good:
PS2 :
The file is attached to the actual post (still having problems uploading to DevDB
)
[12/08] Version 1.6.7 :
-
DUAL Sound-Engine (Wolfson AND ScoobyDoo) selectable via STweaks !!! :good: :good: :good:
- Wolfson: Fixed privacy mode not working on CM
- Wolfson: Fixed speaker equalizer not working correctly on CM + added 2 eq bands (now with 5 eq bands)
- Wolfson & ScoobyDoo: Some internal modifications to avoid interference between engines
- ZZMoove : Updated to version 0.7
- Fixed cpu max freq not going beyond 1400Mhz
Important : File is attached to
>>this post<< as I can't upload to DevDB (server problem ???)
[09/08] Version 1.6.6 :
- Patched with
Samsung Source Update11 :good:
- Switched to FULLY working
Wolfson Sound Engine (winner of the poll Wolfson vs ScoobyDoo) (no more mic and media problems & added speaker equalizer to STweaks audio tab) :good:
- MMC: Fix the workqueue overload battery waste (cm patch)
- Removed cpu freq limit (causing some microlags ...)
NOTE : Wolfson Privacy mode doesn't work on CM
Version 1.6.6 download :
http://xdaforums.com/devdb/project/dl/?id=172
[04/08] Version 1.6.5 :
- Activated linaro
neon compilation flag ( fly fly baby
) :good:
- Linux : Updated to
Linux 3.0.89 :good:
- Stweaks : now using folder
/data/.googy/
-
STWeaks : added PROFILES tab (battery-balanced-performance) :good::good:
- Little lowmemorykiller tweak
- Added UKSM feature (Ultra Kernel Samepage Merging) (Too much trouble)
- Fixed charging when the phone is off
-
Reduced battery-monitor wakelocks
-
Reduced wireless wakelocks
- ZRAM : properly re-implemented
LZ4 but with
XVMALLOC instead of ZSMALLOC
- ZCACHE activated (Fixed Youtube-Camera-Video problems)
Direct 1.6.5 download link :
http://xdaforums.com/devdb/project/dl/?id=159&task=get
[30/07] Version 1.6.2 :
-
Fixed compatibility with CM10.2 ! :good: :good: :good:
- Linux : Updated to
Linux 3.0.88 :good:
- Updated Net drivers to match CM ones
- Stweaks : Fixed IO-schedulers reverting to cfq after reboot
[28/07] Version 1.6.1 :
- Compiled with Neon and Hard-Float libraries
- CPUFreq : Forcing cpu max limit
@Yank555's workaround)
- Stweaks : Cpu profiles are all in CPU tab and immediately applicable
- Stweaks : Touchwake timeout step reduced to 1 for fine tune
[26/07] Version 1.6.0 :
- Schedulers : Removed bfq
- Removed SELinux (too much troubles)
- Dynamic Fsync updated to 1.2 and activated by default
- Stweaks : Added Dynamic Fsync switch to misc tab
- Stweaks : Raised max value of ZZMoove sampling rate
- Fixed 2nd rom utils problems with Dynamic Fsync
- Smoothness restored
- ExFat support fixed
- Touchwake 1.1a
[24/07] Version 1.5.9 :
- Schedulers : Updated bfq to v6r2 3.0
-
MDNIE : AndreiLux's Master sequence implemented and added to Stweaks :good::good::good: (My birthday gift to you)
- GCC : Updated to Linaro gcc 4.7.4 2013-06
-
Stweaks : Added ZZMoove profiles (Battery-Balanced-Performance-Custom) :good::good:
- Stweaks : Fixed some zzmoove settings not being applied
[22/07] Version 1.5.8 :
- Linux : Updated to
Linux 3.0.87 :good:
- ScoobyDoo Sound : Working mic on media apps (cm users, please freeze talkback to get rid of the audioout2 wakelock)
- Schedulers : Updated row to v4 and added bfq (row is now set by default)
- Xbox controller support added
- ZRAM : Remove snappy compression and use LZ4 (better performance)
- Stweaks : Added missing zzmoove settings & reactivated auto-install of stweaks app
- Touchwake : Updated to v1.1
- Phone heating problem hopefully fixed
[19/07] Version 1.5.7 :
- Linux : Updated to
Linux 3.0.86 :good:
- ScoobyDoo Sound 1.1 : Fixed problem of Engine breaking on CM10.1
- ZZMoove : Updated to 0.6 (Thx ZaneZam & Yank555)
- Stweaks : New Tabs for governors settings (ZZMoove - PegasusQ - LulzactiveQ)
- Vibrator : Added support for vibration intensity setting & added to stweaks-misc
- CM10.1 : Added SELinux support
- USB gadget: use two luns on devices with two cards
- UMS: Added cdrom option to UMS-lun-devices with 2048 block size
- Fixed adb and usb-debugging problems
[09/07] Version 1.5.6 :
- Linux : Updated to
Linux 3.0.85 :good:
- Back to compiler linaro gcc 4.7.3 (for better stability and performance)
- Back to
ScoobyDoo Sound Engine 1.0 with basic features : (for stability purposes)
[03/07] Version 1.5.5 :
- ScoobyDoo Sound Engine 1.1 : Fixed Equalizer settings not sticking & Mic level muted on some media apps (skype ...)
- Stweaks : Zram disksize is now configurable with a slider up to 2000MB
- Wifi : Reverted 9505 driver (it was causing higher battery drain especially on CM)
[29/06] Version 1.5.4 :
- Linux : Updated to
Linux 3.0.84 :good:
- Updated compiler to version 4.7.4
-
ScoobyDoo Sound Engine 1.1 with added features :
* Microphone levels adjustable for general / incall / camera
* Privacy mode correctly muting speaker when headphones are plugged
* Balanced headphones volume (Left/Right)
[25/06] Version 1.5.3 :
- GPU OC 600, 640, 666 & 700 Mhz
[24/06] Version 1.5.2 :
- ZZmoove updated to 0.5.1b (All credits and thanks to ZaneZam) :good:
- More cpufreq tweaks
- Stweaks / GPU : Show only available frequencies
- Stweaks / Audio : Speaker volume is now with 1 slider
- Stweaks / Audio : Added Tri-band (Bass-Mid-Treble)
Speaker Equalizer & Corrected speaker amplification default values
ZZMoove 0.5.1b Changelog :
- highly optimised scaling logic (thx and credits to Yank555)
- simplified some tunables by using already available stuff instead of using redundant code (thx Yank555)
- reduced/optimized hotplug logic and preparation for automatic detection of available cores
* (maybe this fixes also the scaling/core stuck problems)
- finally fixed the freezing issue on governor stop!
Known bug : Cpu stats may show Cpu jumping to 1.6ghz for very few seconds. Now that I know that you know that I know about this bug, I am sure there will be no double report about it until it's fixed
[23/06] Version 1.5.1 :
- Lots of modifications to arm_mach-exynos / cpufreq / kernel => Smoothness is back !!! :good:
- Re-introduced simple OC up to 1.6 Ghz
- OC is applied after init process (boot forced at 1.4 Ghz)
- Small tweaks to lulzactiveq
[20/06] Version 1.5.0a :
- Linux : Updated to
Linux 3.0.83 :good:
[20/06] Version 1.5.0 :
- ZZMoove : Updated to 0.5.1a (Kindly maintained and shared by ZaneZam) :good:
- Sound : Switched to
WOLFSON Sound Engine (All credits to AndreiLux) and fixed initialization problems on sammy
and cm roms !!
- MTP : Back to previous state
- ABB : Values are now sticking as they should
[14/06] Version 1.4.9 :
- Linux : Updated to
Linux 3.0.82 :good:
- Fixed some lags
- Fixed misbehaving MTP
[13/06] Version 1.4.8 :
-
Zzmoove v0.5 & LCDFreq scaling
- Some Hotplug & Cpufreq tweaks
- Zram : Snappy compression v3
[10/06] Version 1.4.7 :
- Linux : Updated to
Linux 3.0.81
- HDMI : Fixed broken audio output (all credits to
@Yank555)
- Linaro : More optimization to compilation flags
- STweaks : IO-Schedulers settings can now be applied directly
- STweaks : Charging current adjustable up to 1500mA (use with caution)
[03/06] Version 1.4.6 :
- Dyn-Fsync : Disabled as it conflicts with 2nd ROM Utils
[02/06] Version 1.4.5 :
- Wireless : Updated to i9505 driver
- Linaro : Additional optimization compilation flags
- Activated unaligned memory access
- Dyn-Fsync : Force flush in case of kernel panic or rebooting
- Stweaks : Added Dyn-Fsync switch
-
Adaptive Body Bias : Correctly implemented ABB & added to STweaks (all ABB credits to Andreilux)
- IO-Scheduler : internal/external memory now configurable via STweaks
- Zram : Consider low pages in the lowmemorykiller
- Cleancache activated
- Stweaks : Default ROM setting is now sticking
[29/05] Version 1.4.4 :
-
Touch-to-Wake is now disabled when on call
- mDNIe sharpness tweak is now activated by default
- Touchboost is working as it should
- Some GPU tweaks for optimal performance
- Some CPU govenors tweaks for better smoothness
- Speaker tuning is now working as it should
- Overall performance and stability increased (check your benchmarks)
NOTE : IT IS ADVISED TO RESET STWEAKS SETTINGS AND REBOOT FOR OPTIMAL PERFORMANCE
[26/05] Version 1.4.3 :
- Added
Touch-to-Wake configurable via STweaks (activated by default with 20s delay)
- Slide-to-Wake removed (for obvious reasons )
- Removed "frandom" (I don't want no dilemma about it being useful or not)
- Zram settings can now be applied immediately in stweaks, no need for reboot
[25/05] Version 1.4.2 :
- Overclocking is back (1500Mhz & 1600Mhz)
- Added "frandom" (Fast random generator)
[25/05] Version 1.4.1 :
- Back to Voodoo-sound engine
- Tweaked Voodoosound internal hardware eq-bands values => No more need to think of another sound engine :fingers-crossed:
- Lowered speaker hardware amplification offset to avoid distortion
- Updated to
Linux 3.0.80
- Reworked a lot of internal settings in drivers & arm structures to match S3 specific values =>
Huge performance gain !!!
- CPU overclocking is disabled
- Zram is now set as default to 300MB & 70% swappiness
- Fixed adb activation problem
- Tweaked TCP buffer sizes for wifi, hsdpa, hsupa & gprs
[23/05] Version 1.4.0 :
- Removed Voodoo-sound engine
- Added Boeffla-sound engine AND made it configurable via STweaks with a wonderful added EQ-preset : "Googy-Max" !!! (Be careful for your ears, I warned you ) :good:
[21/05] Version 1.3.3 :
- Linux 3.0.79 update introduced a bug stucking, in some cases, at least 2 cpu cores on Max Freq !!! => Fixed
- Lowered default zram disksize to 200MB
- New logo (Thanks to qrashers)
[20/05] Version 1.3.2 :
- Updated to
Linux 3.0.79
- ZRAM is now with up-to-date LZO compression
[18/05] Version 1.3.1 :
- ZRAM activated and
configurable in STweaks (On/Off (On default) - Zram disksize (400MB default) - Swappiness(80% default) )
[17/05] Version 1.3.0 :
- Wireless hotspot fixed (AP working on sammy & cm)
- Removed zram (again !)
- Intelli memory writeback - 0 when screen ON & 500ms when screen off
- Adaptive Body Bias control
- smp patches for better hotplug
- Optimized ARM RWSEM algorithm
- Corrected flags of linaro gcc
- Overall performance increased
[13/05] Version 1.2.0 :
- Updated to
Linux 3.0.78
- Activated Zram with updated lzo compression
- Some pegasusq optimizations
- lulzactiveq is now set by default
- No more lags !!!
[11/05] Version 1.1.0 :
- Fixed a LOT of mali & ump driver settings problems => Huge performance boost
- Higher Random Entropy
- Min & Max SD ReadAhead x2
- Wifi driver from i9500 sources
- Dynamic FSync
- Zzmoove 0.4
[08/05] Version 1.0.0 (Compared to Siyah base) :
- Updated to
Linux 3.0.77
- Patched to Samsung Sources Update10
- Compiled with
gcc linaro 4.7.3
- Disabled Zram