Alcatel One Touch Idol 2 S (OT-6050Y) Owners

konrado332211 said:

i need CWM backup. If anybody can do this i really thanks

Click to expand...

Click to collapse

stalin2000zipok said:

Hi!
I'm from the community 4pda.
We ported TWRP.
Instructions:
1. Install ABD drivers from AdbDriverInstaller.exe
2. Put your device in FastBoot mode (turn it off, than, hold Volume Down + Power button.
After Alcatel One Touch Idol 2S logo appears, release buttons)
3. If you did everything correctly - Alcatel logo will stay on screen.
4. Plug in phone via USB.
5. Run check_device.cmd. If Ok, you can see "9e0eb10 fastboot" caption at bottom of command
window (digits can be other). If you see this caption - follow next step, if don't - check
adb drivers from #1 installed.
6. Run flash_recovery.cmd to flash TWRP. All done. To boot into TWRP turn off power, and hold
Volume Up and press Power.
Thanks: GR4YN , helpok
file download from this reporthttp://xdaforums.com/showpost.php?p=60884415&postcount=49

Click to expand...

Click to collapse

stalin2000zipok said:

fastboot.exe sended

Click to expand...

Click to collapse

stalin2000zipok said:

All Hello again, due to the fact that the backup rolled forward to the 4.3 runs not all perfect, we publish all the action that needs to be done, that would change the ID of your phone with 6050Y 6050A on the Canadian version.

Click to expand...

Click to collapse

gyongyosimate1 said:

I faced a probem during flashing TWRP in the terminal. (Look at the attached photo.) What can I do? Though the script in the terminal have finished, still the previous recovery (CWM) loads.

Click to expand...

Click to collapse

stalin2000zipok said:

fastboot.exe sended

Click to expand...

Click to collapse

frank087234 said:

Is there really kitkat update for idol2 mini S ????

Click to expand...

Click to collapse

stalin2000zipok said:

Hi!
I'm from the community 4pda.
We ported TWRP.
Instructions:
1. Install ABD drivers from AdbDriverInstaller.exe
2. Put your device in FastBoot mode (turn it off, than, hold Volume Down + Power button.
After Alcatel One Touch Idol 2S logo appears, release buttons)
3. If you did everything correctly - Alcatel logo will stay on screen.
4. Plug in phone via USB.
5. Run check_device.cmd. If Ok, you can see "9e0eb10 fastboot" caption at bottom of command
window (digits can be other). If you see this caption - follow next step, if don't - check
adb drivers from #1 installed.
6. Run flash_recovery.cmd to flash TWRP. All done. To boot into TWRP turn off power, and hold
Volume Up and press Power.
Thanks: GR4YN , helpok
file download from this reporthttp://xdaforums.com/showpost.php?p=60884415&postcount=49

Click to expand...

Click to collapse

stalin2000zipok said:

Android 4.4.2 Kit Kat for Alcatel 6050Y, ENG​

Hello. That long-awaited firmware for our phone, but unfortunately the Russian language in it.
For the rest, it's a great firmware work in networks has shown excellent results, charge an adequate rate, a synthetic test scored 18000 points.
Note: Your phone must be unlocked!
Instructions:
1. Setup TWRP
2. Loading the firmware on your PC
This firmware has GOOGLE APPS
https://yadi.sk/d/hsHHfV9lgmJaL
This firmware is not GOOGLE APPS
https://yadi.sk/d/0HDwpnk_gnJPz
3. Extract
4. Write to the flash card option type F: \ TWRP \ BACKUPS \ 53deb6fa \ 1970-01-01--13-24-36
5. Turn off the phone
6. Turn on the phone and in recovery: "Volume UP" and "Power On"
7. Select> Restore> 1970-01-01--13-24-36> how to unlock the bottom> Swype to Resrote (blue circle with an arrow to pull to the right)
8. Reboot and enjoy the new firmware!
Thank you to everyone who helped --- GR4YN --- WestFring --- helpok --- deadlink ---
P.S.Firmware received from Canada, substitute 6050I 6050A on, that's all! With a network everything is fine you can see everything, do not forget to make a backup of your firmware.
None of what you delet any answer except yourself.

Click to expand...

Click to collapse

stalin2000zipok said:

All Hello again, due to the fact that the backup rolled forward to the 4.3 runs not all perfect, we publish all the action that needs to be done, that would change the ID of your phone with 6050Y 6050A on the Canadian version.
ATTENTION !!! All those who decide to do 1. Make a backup BOOT sector. 2. When working with the instructions there is a line above the Y6050, in my screenshot IJ indicated it does not change it, it for each unique. And yet how to make a file "p3.img" copy it as an additional backup.
1. The mobile should be is not locked!
2. Root on the device
3. PC or Laptop
Instructions.
1. To install the terminal
https://play.google.com/store/apps/details?id=jackpal.androidterm&hl=ru
2. Instal hex editor
https://play.google.com/store/apps/details?id=tuba.tools&hl=ru
3. Run a terminal and write without the quotes

Code:

su

and press enter (the resolution must come from the Root SuperSu for entitlement)
4. After this, as we have done in our place of "$" icon to be "#"
5. Writing in the terminal

Code:

dd if=/dev/block/mmcblk0p3 of=/sdcard/p3.img

6. It should leave a message view screenshot1.jpg
7. Now open the HEX Redactor and look on the card file "p3.img" it would without the quotes.
8. Now look for the line that has the information of the

Code:

ULY6050Y-2CBGRU7

look for clarity screen, I selected an orange2.jpg
9. We need to change a line in the IJY6050Y-2DB6CA7
10. Each character must be changed individually and so begin.
11. Where in the screenshot 59 changes to 41 should get on the line Y6050A-2
12. From the following input line 44 42 36 43 41
13. The result should look like this: see. Screenshot.3.jpg
14. Save the resulting RESULT.
15. Open the terminal and write

Code:

dd if=/sdcard/p3.img of=/dev/block/mmcblk0p3

after writing the code press enter
16. The terminal should display the following. cm. screenshot4.jpg
17 Done! Now connect your phone to select the Mobile Upgrade Q 6050http://www.alcatelonetouch.com/ru/downloads/ru/IDOL_2_S/otu/mobile-upgrade-q-4-6-5-setup.rar
18. Update, download and install the Jew and rejoice 4.4.2 from official sources.
Thank you for giving instructions GR4YN & me helpok
P.S. Sorry for my English, I skipped classes in school.

Click to expand...

Click to collapse

stalin2000zipok said:

Faced with such a problem that does not go to the settings in security. It happens that it downloads from the forum, instead of wasting money. But because of an error in the settings you can not install applications from other sources. But this problem can be solved. Es Download the guide, go to settings, flipping naholim application settings, apps and already there, put a checkmark to remove / install applications. I tried to download the camera fv-5 pro, and so properly set. Installed, it works.)

Click to expand...

Click to collapse

audit13 said:

Did you try restoring the phone via Alcatel's Mobile Upgrade program?

Click to expand...

Click to collapse

iceman2029 said:

Finally I could Rooting my phone Alcatel OneTouch Idol 2 S (6050), also known as ÖWN S5030 and TCL S830U.

The steps are:

1. Go to: http://www.decker.su/2014/11/cwm-recovery-alcatel-ot-6036y-ot-6050y.html
2. Download package 'cwm_alcatel_6050y.7z'
3. Extract all files
4. Install ABD drivers from file 'AdbDriverInstaller.exe'
5. Put your device in FastBoot mode (turn it off, than, hold Volume Down + Power button. After Alcatel One Touch Idol 2S logo appears, release buttons)
6. If you did everything correctly - Alcatel logo will stay on screen. Plug in phone via USB.
7. Run file 'check_device.cmd'. If Ok, you can see "9e0eb10 fastboot" caption at bottom of command
window (digits can be other). If you see this caption - follow next step, if don't - check adb drivers.
8. Run file 'flash_recovery.cmd' to flash cwm. All done. To boot into CWM turn off power, and hold Volume Up and press Power.
9. Now the SuperSU. Go to : http://xdaforums.com/android/help/qa-alcatel-one-touch-idol-2-s-ot-6050y-t2902408/page2
10. Download file 'BETA-SuperSU-v2.42.zip' and copy to the phone
11. Flash ZIP with CWM

Source 1: http://www.decker.su/2014/11/cwm-recovery-alcatel-ot-6036y-ot-6050y.html)
Source 2: http://xdaforums.com/android/help/qa-alcatel-one-touch-idol-2-s-ot-6050y-t2902408/page2

Click to expand...

Click to collapse

pckoloji said:

This is a nice mid-range phone and I got from Orange Poland with agreement. All works fine and fluid. Even during benchmarks it is barely warm. 7.5 mm thickness (Galaxy S4 dimensions) and very slim LCD bezel. Double click screen to wake device. White status LED etc.

Detailed specs: http://www.gsmarena.com/alcatel_idol_2_s-6134.php

In short:

• 5 inç 720p IPS screen
• Snapdragon 400 4 x 1.2 GHz / Adreno 305 GPU
• 1 GB RAM
• 8 GB Internal (5.5 GB available) + microSD (64 GB Lexar 600x UHS-1 microSD tested, working after FAT format by 6050Y)
• LTE 150 Mbps, 802.11n Wi-Fi Dual, Bluetooth 4.0, NFC, A-GPS/GLONASS
• 8 MP Camera with Flash and Full HD Video
• Android 4.3 Installed (4.4 Update Possible)
• 2150 mAh non-removable battery

Official support website http://www.alcatelonetouch.com/global-en/support/download/idol_2_s.html where you can download manual, quick user guide and two important apps.

Smart Suite for managing your mobile. (microUSB connection or Wi-Fi)

Mobile Upgrade Q for checking offical upgrades.

Some downsides:

• MHL not supported, only Miracast
• OTG not supported
• FM Radio works only mono
• Non removable cover

SIM Unlock

Mine came SIM locked. So I searched some and found a YouTube video that unlock is easy with FuriousGold device. Same person has an online code generator. I have no connection to them but I tested and it worked. Also really cheap only $4.9

http://www.oneunlock.com/en/tools/solution/alcatel-sfr-vodafone-motorola-unlock-codes

It all finished within seconds. I filled form. Operator code is written on product box, on top of IMEI code. After getting email I saw 4 codes and entering only first one was enough.

If you don't have a problem with SIM lock you don't need to do it naturally. But I detected it whenever installed a different operator's SIM card. There are only 5 trials and use them wisely.

Also if you want to play by the book, Orange Poland website asks you to go their office or call helpline for unlock and payment will be 77 PLN which makes nearly $25.

WARNING: When you unlock your device they have a right to say product warrany is invalid.


ROOTING

Again you don't need to root but I used to have programs like Titanium Backup, Xposed Framework, Viper4Android etc so I wanted to find a solution.

ATM the only method I know that works is Towel Root Only install it and click button. Matter of second and done. After that you might want to install SuperSU or Superuser app.

After rooting, there is a possibility that Alcatel official device updates won't be compatible. In that case unroot might be necessary. I haven't tried but SuperSU app has an Full Unroot option. Please let us know if you tried.


CUSTOM RECOVERY

ATM I could not find CWM or TWRP suitable for this device. Perhaps it is not necessary since there is no custom ROM / CM package. But I am sure custom recovery can be compiled.

UPDATE: Thanks to Decker.Kaluga, we have a compatible CWM recovery now. (I have not tried yet.)

http://xdaforums.com/showpost.php?p=57639354&postcount=10

Click to expand...

Click to collapse