[KERNEL] AJK v4.9 [** The ONE **] [JB]

Full support for Kernel Screen Gestures Builder
WIFI Driver ported from SG4
New Mali V2 Video Driver
Overclocking up to 1400 MHz
Be very careful with voltage settings. UnderVolting usually causes bad things..
Slide2Wake is now automatically disabled while on a call. (Modded for less battery drain)
Native USB Tethering.
Native Wi-Fi Tethering
File systems support: Ext3/4, FAT32, NFS, CIFS, NTFS
Added tweaks to increase I/O Speed.
Added tweaks to increase CPU speed
Removed all the debuggers
Better picture quality thanks to camera tweaks
BLN without Wakelock - see STweaks BLN tab to activate.
Touch Keys Light change with the screen brightness
MMC_CAP_ERASE not present
Sound boost controls in STweaks.
Added mdnie interface and made hardcore’s sharpness tweaks optional
5 GPU FREQ Steps from 108Mhz to 520Mhz
Ultra KSM from 3.9.y kernel.
[/LIST]

Wipe cache
Wipe dalvik
Install AJK - DO NOT REBOOT YET...
While still in recovery, go to advanced and reboot recovery
After recovery has been restarted, go into kernel specific options and Reset ExTweaks profiles
Fix permissions in recovery
Reboot and enjoy the new kernel

v5.0 (in development)
Updated ROM compatibility - now works on all current ROMs
Fixed SoD when using ZZMOOVE as sleep governor
Imported the latest Samsung ramdisk files
Fixed an issue where profiles might be reset
- Any further profile issue MUST be due to a ROM or rogue app issue.
- The logs I have seen are indicating that the profile was deleted by something. Kernel is not capable of this...

v4.9
Fixed JB_Sound_Fix on Samsung based ROMs
Fixed a small profile issue
Fixed an issue with CPU grouping
Improved ROM compatibility
Misc fixes & tweaks
New battery profile
New performance profile - Highly recommended! Great performance & very good battery life!
GPIO pin definitions fixed
There's more but I forgot to write it down as I went...

v4.8
Small FileSystem tweak
Improved ROM compatibility
Disabled the boot logo for now

v4.7
Fixed various issues with CM10.1.3 RC2
Sync'd CM10.x init files with CM sources
Set ROOT to default ON for CM10.2
Updated ZZMOOVE to v0.7d
Set default profile sleep scheduler to BFQ
New Battery profile, based on ZZMOOVE v0.7d
New boot logo by Teknodad1974

v4.6
Tuned battery & performance profiles a bit
Tweaked CortexBrain
Fixed a small profile bug
Updated ZZMOOVE governor
-new ZZMOOVE governor is VERY smooth (smoothest gov I have found), uses slightly more battery than Hyper.


v4.5
Nice new boot logo by Teknodad1974
Recovery background remains plain black to make it easier to read recovery text
Fixed a small issue with recovery
Added exFAT support
Updated governors & i/o schedulers
Updated profiles
Updated Stweaks
Added the Dorimanx implementation of CPU Voltage Groups. This will let people see why some phones UV easily and some cannot UV.


v4.4
Added support for Android 4.3
Some code cleanup
Tweaked touchscreen and display to improve smoothness

v4.3
Reverted part of the frequency cleanup as it caused a slight hesitation in the UI

v4.2
Bugfix - corrected CPU frequency table
Boots & settles in much faster now

v4.1
Undervolting has been given a reprive thanks to topiratiko & samprocat
Use UV with CAUTION and expect no support when using UV
CPU frequency table has been tuned down to 6 primary frequencies for efficiency
CPU voltages have been corrected in the profiles to account for the new frequency table
Fixed mic swapping (MicSwap version only, obviously)
Due to the changes made to the CPU frequency table and the CPU voltage table,
it is CRITICAL that you follow the installation instructions exactly as outlined here.
S959G users please ask for assistance from more experienced S959G users
if you need assistance..
PLEASE do not just ignore the need for profile resets!
This version will start off slow (possibly VERY SLOW) and will speed
up as it settles in. First boot can take a LONG time. This is both normal and expected.

v4
Project "SMOOTH UI" is now complete!
You should notice better performance in every way. If not, you're doing something wrong!
Fixed poor performance on Samsung ROMs - they did not like the OOM settings in v3.9 .
Any trouble reports that do not include a logcat will be ignored.

v3.9
New boot logo by Teknodad1974
Corrected the context on the Stweaks->Screen tab
Removed BLN "blink" and "fade" options as they do not work on our phones
Added a new "AJK Tweaked" OOM profile (Stweaks->Memory tab)
Most people will see a nice improvement from the new OOM profile
Slide2wake fix should be functional now
Ad-Block is expanded & updated. This is a complete ad blocking solution now
Ad-Block can be added/removes d in Stweaks->Other
Ad-Block can be updated automatically via setting in Stweaks->Other

v3.8
AKA: THE ONE
Nightmare has been tuned and should be much more stable now
Added ZZMOOVE governor by ZaneZam (a great battery or sleep governor)
New topiratiko tuned profile
MAJOR smoothness improvements made by Project "SMOOTH UI"
Re-added Touchscreen Sensitivity setting in Stweaks
Added touchscreen revision detect button in Stweaks -> Screen
Added additional touchscreen settings for different touchscreen type

Many thanks to the testing team for working hard and relaying good
information for me to build upon. :highfive:

Special thanks to topiratiko for providing invaluable information
and letting me bug him into the wee hours of the mornings
testing new kernels. :good:


v3.2
WiFi toggle bug is a thing of the past (has been for weeks now on AJK actually...)
Slide2Wake is now disabled while you are on a call.
New Mali V2 drivers - best graphics performance on the i777.
S4 code implemented for WiFi.

I will have to populate this later as it somehow got removed while
my thread was locked for maintenance.