Cube U30GT-H flashing problem. [closed]

Search This thread

quenxer

Member
Dec 7, 2011
10
3
Hi,

i cant flash my device (cube u30gt-h). Tried different usb cable and pc. Nothing helps always same failure.

RKbatchtool stucks at Low Level Formating and gives this error:

Loading firmware...
Loading firmware Finished.
Loading firmware...
Loading firmware Finished.
**********Restore Action**********
**********Restore Start Total<1>**********
<Layer 4-8> Test Device Start
<Layer 4-8> Test Device Success
<Layer 4-8> Lowerformat Device Start
<Layer 4-8> Lowerformat Device Success
<Layer 4-8> Test Device Start
<Layer 4-8> Test Device Success
<Layer 4-8> Check Chip Start
<Layer 4-8> Check Chip Success
<Layer 4-8> Get FlashInfo Start
<Layer 4-8> Get FlashInfo Success
<Layer 4-8> Prepare IDB Start
<Layer 4-8> Prepare IDB Fail
**********Restore Done Success<0> Fail<1> Time<2171>ms**********


Could somebody help me? Seems that flashing tool cant format it. Tried rkbatchtool and RKAndroidTool. Is there another option for succesfully erase the nand of this tablet?
 
Last edited:
  • Like
Reactions: cn.boy

denva

Senior Member
Jun 25, 2011
65
5
Accra Ghana
Works again, maskrom mode helped (closed)

**********Restore Action**********
**********Restore Start Total<1>**********
<Layer 5-7> Download Boot Start
<Layer 5-7> Download Boot Success
<Layer 5-7> Wait For Maskrom Start
<Layer 5-7> Wait For Maskrom Success
<Layer 5-7> Test Device Start
<Layer 5-7> Test Device Success
<Layer 5-7> Check Chip Start
<Layer 5-7> Check Chip Success
<Layer 5-7> Get FlashInfo Start
<Layer 5-7> Get FlashInfo Success
<Layer 5-7> Prepare IDB Start
<Layer 5-7> Prepare IDB Success
<Layer 5-7> Download IDB Start
<Layer 5-7> Download IDB Success
<Layer 5-7> Reset Device Start
<Layer 5-7> Reset Device Success
<Layer 5-7> Wait For Loader Start
<Layer 5-7> Wait For Loader Fail
**********Restore Done Success<0> Fail<1> Time<35490>ms**********

I have tried many times using mask rom but still stucks at recovery any solution ?
 

quenxer

Member
Dec 7, 2011
10
3
**********Restore Action**********
**********Restore Start Total<1>**********
<Layer 5-7> Download Boot Start
<Layer 5-7> Download Boot Success
<Layer 5-7> Wait For Maskrom Start
<Layer 5-7> Wait For Maskrom Success
<Layer 5-7> Test Device Start
<Layer 5-7> Test Device Success
<Layer 5-7> Check Chip Start
<Layer 5-7> Check Chip Success
<Layer 5-7> Get FlashInfo Start
<Layer 5-7> Get FlashInfo Success
<Layer 5-7> Prepare IDB Start
<Layer 5-7> Prepare IDB Success
<Layer 5-7> Download IDB Start
<Layer 5-7> Download IDB Success
<Layer 5-7> Reset Device Start
<Layer 5-7> Reset Device Success
<Layer 5-7> Wait For Loader Start
<Layer 5-7> Wait For Loader Fail
**********Restore Done Success<0> Fail<1> Time<35490>ms**********

I have tried many times using mask rom but still stucks at recovery any solution ?


Yes, flashing stock firmware. Search on net, you can find a lot of firmwares for this machine, but only stock firmware helps to get a full functionally tablet again and try to flash only with back usb ports not front.
 
Last edited:
  • Like
Reactions: denva

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    Hi,

    i cant flash my device (cube u30gt-h). Tried different usb cable and pc. Nothing helps always same failure.

    RKbatchtool stucks at Low Level Formating and gives this error:

    Loading firmware...
    Loading firmware Finished.
    Loading firmware...
    Loading firmware Finished.
    **********Restore Action**********
    **********Restore Start Total<1>**********
    <Layer 4-8> Test Device Start
    <Layer 4-8> Test Device Success
    <Layer 4-8> Lowerformat Device Start
    <Layer 4-8> Lowerformat Device Success
    <Layer 4-8> Test Device Start
    <Layer 4-8> Test Device Success
    <Layer 4-8> Check Chip Start
    <Layer 4-8> Check Chip Success
    <Layer 4-8> Get FlashInfo Start
    <Layer 4-8> Get FlashInfo Success
    <Layer 4-8> Prepare IDB Start
    <Layer 4-8> Prepare IDB Fail
    **********Restore Done Success<0> Fail<1> Time<2171>ms**********


    Could somebody help me? Seems that flashing tool cant format it. Tried rkbatchtool and RKAndroidTool. Is there another option for succesfully erase the nand of this tablet?
    1
    Works again, maskrom mode helped (closed)
    1
    **********Restore Action**********
    **********Restore Start Total<1>**********
    <Layer 5-7> Download Boot Start
    <Layer 5-7> Download Boot Success
    <Layer 5-7> Wait For Maskrom Start
    <Layer 5-7> Wait For Maskrom Success
    <Layer 5-7> Test Device Start
    <Layer 5-7> Test Device Success
    <Layer 5-7> Check Chip Start
    <Layer 5-7> Check Chip Success
    <Layer 5-7> Get FlashInfo Start
    <Layer 5-7> Get FlashInfo Success
    <Layer 5-7> Prepare IDB Start
    <Layer 5-7> Prepare IDB Success
    <Layer 5-7> Download IDB Start
    <Layer 5-7> Download IDB Success
    <Layer 5-7> Reset Device Start
    <Layer 5-7> Reset Device Success
    <Layer 5-7> Wait For Loader Start
    <Layer 5-7> Wait For Loader Fail
    **********Restore Done Success<0> Fail<1> Time<35490>ms**********

    I have tried many times using mask rom but still stucks at recovery any solution ?


    Yes, flashing stock firmware. Search on net, you can find a lot of firmwares for this machine, but only stock firmware helps to get a full functionally tablet again and try to flash only with back usb ports not front.