How do we get swype to work on the tab? I tried to install, it says not supported..
EDIT: Followed Post 4186 and reflashed, error went away...flash seems successful. Thankyou!
Here's what I see:
BaseBand: P1000XXJPZ
Kernel: 2.6.35.7-gd1242c7 (blinky-ghost@cyanogenmod #1)
Memory: 488 MB
CM Version: 9-20120427-NIGHTLY-p1
Build No: IMM76D
Everything works so far!! Wow ICS is awesome on the tab
make[1]: Entering directory `/home/ableeker/sgt7/kernel/samsung/p1'
make[2]: ../../../prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-gcc: Command not found
GEN /home/ableeker/sgt7/out/target/product/p1/obj/KERNEL_OBJ/Makefile
scripts/kconfig/conf -s arch/arm/Kconfig
drivers/cpufreq/Kconfig:176:warning: defaults for choice values not supported
drivers/cpufreq/Kconfig:182:warning: defaults for choice values not supported
make[2]: ../../../prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-gcc: Command not found
GEN /home/ableeker/sgt7/out/target/product/p1/obj/KERNEL_OBJ/Makefile
CHK include/linux/version.h
CHK include/generated/utsrelease.h
CHK include/generated/kernelversion.h
Using /home/ableeker/sgt7/kernel/samsung/p1 as source for kernel
CC scripts/mod/empty.o
/bin/sh: ../../../prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-gcc: not found
make[4]: *** [scripts/mod/empty.o] Error 127
make[3]: *** [scripts/mod] Error 2
make[2]: *** [scripts] Error 2
make[1]: *** [sub-make] Error 2
make[1]: Leaving directory `/home/ableeker/sgt7/kernel/samsung/p1'
make: *** [TARGET_KERNEL_BINARIES] Error 2
make: *** Waiting for unfinished jobs....
I have problems with wifi. I often lose signal. I started having problems when, in an old no-mtd rom (AOKP), I installed new wifi drivers by humberos (kernel 20120325). I then reported the tablet to the stock rom --> Overcome kernel --> I wiped data & dalvik-cache--> i installed last mtd CM9 nightly build, but the problem persist...
I have a GSM Tab (p1000).
Why does Tmobile give only Edge on this? Used my 4G Prepaid sim card on the tab...is there a way to change some settings and get higher 3g or 4g speeds?
Change dpi to 240 reboot and then install swype then change dpi back to 160
Sent from my LG-P999 using Tapatalk 2
you are talking about tmo us? you will have to make a choice if you want telephony or 3g (by choosing a specific modem)...
Sent from my GT-P1000 using XDA
This is the exact problem i'm facing, wifi signal on the old wifi driver was so stable, this new driver loses wifi connection when wifi signal is weak.(1 or two bars in status bar wifi signal indicator)
I sent a PM to Humberto and asked him if its possible for him to make the old driver as a flashable zip file, but seems like he hasn't seen my PM.
Humberto, or any other Devs, please help!
Just flashed the latest nightly 20120427 and was amazed to see the camera works fine. WiFi also works fine as it did in previous version but 3G and GPS has stopped working (both these worked fine before).
Model: GT-P1000
Baseban version: Unknown
Kernel: 2.6.35.7-gd1242c7-dirty
CyanogenMOD: 9-20120427-NIGHTLY-p1
I had to reflash the Kernel a few times before I got a boot as it kept booting into ClockworkMOD. But seems to be booting fine now and quite stable. Just GPS and 3G nor working.
Form hat Bild did you come? Did you restock?
Sent from my GT-P1000 using XDA
From a previous screenshot I see I was on Kernel: 2.6.35.7 SGT7-ICS-TE4M#20120410
I did see the link to download modem files and flashed the JPZ modem file. No errors shown. But when I reboot it still shows no Baseband Version. I see I did previously have P1000XXJPZ running as my baseband version.
root@android:/ # dmesg | grep dhd
<4>[ 3.637606] dhd_attach thr:58 started
<4>[ 3.639300] dhd_attach thr:59 started
<4>[ 3.641426] dhd_attach thr:5a started
<4>[ 3.677511] Compiled in drivers/net/wireless/bcmdhd on Apr 29 2012 at 20:53:48
<4>[ 192.301948] Compiled in drivers/net/wireless/bcmdhd on Apr 29 2012 at 20:53:48
<4>[ 192.656667] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
<4>[ 227.095542] dhd_prot_ioctl : bus is down. we have nothing to do
<4>[ 227.095826] dhd_prot_ioctl : bus is down. we have nothing to do
<4>[ 227.096074] dhd_prot_ioctl : bus is down. we have nothing to do
<4>[ 289.837292] dhd_set_suspend: force extra Suspend setting
<4>[ 289.852448] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=3 Listen=10
<4>[ 381.120804] dhd_set_suspend: force extra Suspend setting
<4>[ 381.133740] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=3 Listen=10
<4>[ 406.749887] [B]Compiled in drivers/net/wireless/bcmdhd[/B] on Apr 29 2012 at 20:53:48
<4>[ 407.060733] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
<4>[ 466.883461] dhd_set_suspend: force extra Suspend setting
<4>[ 466.898421] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=3 Listen=10
unzip the modem zip, copy the modem.bin to /radio and you will see baseband in 5 minsFrom a previous screenshot I see I was on Kernel: 2.6.35.7 SGT7-ICS-TE4M#20120410
I did see the link to download modem files and flashed the JPZ modem file. No errors shown. But when I reboot it still shows no Baseband Version. I see I did previously have P1000XXJPZ running as my baseband version.
** These CyanogenMod builds are highly experimental and unsupported.
**
** If one of this builds bricks your phone, kills your cat or causes
** a thermonuclear war, don't point at us. We'll laugh at you.
** You decided to make this modifications to your Tablet.
**
** Please refrain from submitting bug reports for any issues
** you may encounter while running one of these builds.
**
** Submitting bug reports on experimental builds is the leading
** cause of male impotence.
Known issues, Downloads and Screenshots: Post #2
USB Tethering won't work in windows (works in ubuntu, untested on OSX)
Official Nightlies : http://get.cm/
mkdir ~/cm9
cd ~/cm9
repo init -u git://github.com/CyanogenMod/android.git -b ics
repo sync
source build/envsetup.sh
cd device/samsung/p1 ; ./extract-files.sh
brunch p1
source build/envsetup.sh
make out/target/product/p1/boot.img