My Mum's Ace GT-S5839i seems to be stuck in a bootloop after it froze when she was playing a game.
I've been trying to recover it using Odin, but I'm not having any luck. These are the steps I tried:
-Downloaded Odin v3.09
-Downloaded the stock firmware (from Sammobile.com)
-Opened Odin
-Put phone into Download Mode
-Connected phone
-Press AP, and selected the firmware file
-Press start
It then fails. This is the message list:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iXXLK2_S5839iH3GLC2_S5839iNELK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> BcmCP.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any suggestions as to what I should try? I've never used Odin before, so I'm unsure of what to do.
Thanks
I've been trying to recover it using Odin, but I'm not having any luck. These are the steps I tried:
-Downloaded Odin v3.09
-Downloaded the stock firmware (from Sammobile.com)
-Opened Odin
-Put phone into Download Mode
-Connected phone
-Press AP, and selected the firmware file
-Press start
It then fails. This is the message list:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iXXLK2_S5839iH3GLC2_S5839iNELK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> BcmCP.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any suggestions as to what I should try? I've never used Odin before, so I'm unsure of what to do.
Thanks