Hi all, I'm just flash lastest kernel and have a small question: I don't see some feature such LED control or Fast charge or OC...I'm on X-note 15.0 and that kernel competible with that ROM or only Echoe ROM?
Before a time, i flash another kernel and it have all i need: OC...with this kernel i dont see anythingRead OP! Says right there how to configure led.
And what app are you using for setting things up?
Sent from my SM-N9005 using Tapatalk
Before a time, i flash another kernel and it have all i need: OC...with this kernel i dont see anything
But what app do you use to configure this kernel? Trickster, synapse, setcpu?
Sent from my SM-N9005 using Tapatalk
With v3 i get random freezes
Gesendet von meinem SM-N9005 mit Tapatalk
That is somewhat necessary on first boot. V3 with my old settings (up threshold 80 and some other performance tweaks) wouldn't let me get past pin unlock unless I let it cool off b 4 unlocking. Had to start setting all over againuninstall any apps that control clock speeds, etc. leave it at stock and you'll be just fine.
That is somewhat necessary on first boot. V3 with my old settings (up threshold 80 and some other performance tweaks) wouldn't let me get past pin unlock unless I let it cool off b 4 unlocking. Had to start setting all over again
Now it runs so smooth
Yesterday I checked my battery on 56% and put it in my pocket, took some pictures and a video back in the pocket, checked it 4 hours later: battery on 56% WTF
Wanna make me jealous? I think u just didoh, itll get better. theres this nice thing about being frieds guinea pig, i get to play with all the cool toys a day or two early - power savings seem quite nice on the next release
After a reboot u need to give the phone and especially the app that sets the CPU some time to settle. Also when u use trickster it gives the answer when u set force cpu settings. There are some apps and system settings which can not be easily overridden. So don't worry it's normal the cpu will click in the settings u set most of the time. Strange thing I encountered is that some apps get the permission to change cpu settings. If you have a particular app which does so please tell me I'm kinda curious on that issue.Same problem. I set min and max freq to 300 and 2500, but values changes. Sometimes mix freq grows up, sometime max freq grows up to 2800
How can i set these values?
When i reboot phone, max freq is always 2.8for some time: i would like freq never go over 2.5ghz. How can i achieve this?
Thanks
Sent from my SM-N9005 using XDA Free mobile app
Hi All !
Is there any reason that the minimum frequency changes by itself? like all of a sudden it will go to 1.95 and I have to change it back to 300. This happened after start camera. After frost 1.95 Ghz my cpu. Please help my !!!
Adroid Kit-Kat
Same problem. I set min and max freq to 300 and 2500, but values changes. Sometimes mix freq grows up, sometime max freq grows up to 2800
How can i set these values?
When i reboot phone, max freq is always 2.8for some time: i would like freq never go over 2.5ghz. How can i achieve this?
Thanks
Sent from my SM-N9005 using XDA Free mobile app
if you two are using trickster mod... dont. Fauxclock with MPdecision turned off gives me the best results, and the clocks are stable.
-Made with the latest NG2 Sources (UPDATE 9)
- Latest Linux Kernel Base 3.4.105
- Build with Saber Mod 4.10 Toolchain
- FULL STWEAKS CONTROL
1. TOUCH WAKE IMPLEMENTATION v1.5 [Yank555.lu]
(FULLY FUNCTIONAL INCLUDING FINGER TAP 2 WAKE)
2. POWERSUSPEND 1.5 (Yank555.lu)
3. INTELLIPLUG w/Eco Mode (faux123)
4. INTELLIDEMAND V5 (faux123)
5. INTELLITHERMAL DRIVER (faux123)
6. MANY MANY ADDITIONAL GOVERNORS
(alucard, darkness, nightmare, adaptive, lionheart, intellidemand, smartmax, dancedance, pegasusq,
wheatley, intelliactive, ondemandplus, conservativex, abyssplugv2, intellimm, bioshock, yankactive)
7. MANY MANY ADDITIONAL I/O SCHEDULERS
(Simple (sio), zen, vr, fiops, fifo)
8. LED eXtended ConTRoLs v1.2 [Yank555.lu]
9. CPU Overclock up to 2.8ghz (Default= 2.26 max and 300 min)
10. VOLTAGE CONTROL (overvolting and undervolting available)
11. Asynchronous Fsync: initial extraction of Async Fsync from HTC [faux123]
12. DYNAMIC FSYNC CONTROL (faux123)
13. FAUX SOUND (faux123)
14. FAST CHARGE (Yank55.lu)
15. NTFS Support
16. KSM Support
17. FRANDOM Enabled
18. Sweep2Sleep Feature
19. GPU Simple Algorithm Control (Faux123)
20. Rooted, unsecure, adb support
21. Permissive with init.d support
- faux123
- Yank555
- civato
- wanam
- myfluxi
- UpInTheAir
- Alucard
- ktoonsez
-:indie:
- Every Note 3 Developer
- Every other developer
- XDA
- My INCREDIBLE TEAM!!
- add user configurable touchboost frequencies
SysFs Interface :
* /sys/kernel/cpufreq_hardlimit/scaling_max_freq_screen_on (rw)
*
* set or show the real hard CPU max frequency limit when screen is on
*
* /sys/kernel/cpufreq_hardlimit/scaling_max_freq_screen_off (rw)
*
* set or show the real hard CPU max frequency limit when screen is off
*
* /sys/kernel/cpufreq_hardlimit/scaling_min_freq_screen_on (rw)
*
* set or show the real hard CPU min frequency limit when screen is on
*
* /sys/kernel/cpufreq_hardlimit/scaling_min_freq_screen_off (rw)
*
* set or show the real hard CPU min frequency limit when screen is off
*
* /sys/kernel/cpufreq_hardlimit/wakeup_kick_freq (rw)
*
* set or show the wakeup kick frequency (scaling_min for delay time)
*
* /sys/kernel/cpufreq_hardlimit/wakeup_kick_delay (rw)
*
* set or show the wakeup kick duration (in ms)
*
* /sys/kernel/cpufreq_hardlimit/touchboost_lo_freq (rw)
*
* set or show touchboost low frequency
*
* /sys/kernel/cpufreq_hardlimit/touchboost_hi_freq (rw)
*
* set or show touchboost high frequency
*
* /sys/kernel/cpufreq_hardlimit/userspace_dvfs_lock (rw)
*
* 0 = allow changes to scaling min/max
* 1 = ignore (don't apply, but don't return an error)
* 2 = refuse (don't apply, return EINVAL)
*
* /sys/kernel/cpufreq_hardlimit/available_frequencies (ro)
*
* display list of available CPU frequencies for convenience
*
* /sys/kernel/cpufreq_hardlimit/current_limit_max (ro)
*
* display current applied hardlimit for CPU max
*
* /sys/kernel/cpufreq_hardlimit/current_limit_min (ro)
*
* display current applied hardlimit for CPU min
*
* /sys/kernel/cpufreq_hardlimit/version (ro)
*
* display CPU freq hard limit version information
Touch Wake Control
Allows you to wake the device via one tap in the middle of the screen with finger or S-Pen. NOTE: Turning the device off with the power key will disable touchwake.
1. enable touchwake
2. Let the screen turn off automatically (don't use power key)
3. Tap middle of screen before "touch wake delay" times out. Default is at 5 secs.
SysFs interface :
* /sys/class/misc/touchwake/enabled (rw) : 1 - on / 0 - off
*
* Enable / Disable TouchWake (default = disabled)
*
* NB: Turning the device off with the power key will disable touchwake
*
* /sys/class/misc/touchwake/delay (rw) :
*
* Sets the delay in ms to keep touchscreen / pen actively listening for touch after screen goes off
*
* NB: A value of 0 equals "infinite", will drain battery !
*
* /sys/class/misc/touchwake/proximity_threshold (rw) :
*
* Sets the threshold from which to consider the proximity sensor triggered (which will disable touchwake)
*
* NB: This serves as a kind of in-call detection to not turn the screen on during a call when placing
* the device to the ear
*
* /sys/class/misc/touchwake/use_wakelock (rw) : 1 - on / 0 - off
*
* Enable / Disable using a wakelock to keep device awake while TouchWake is active (default = enabled)
*
* /sys/class/misc/touchwake/version (ro) :
*
* Display the current version of TouchWake
*
* /sys/class/misc/touchwake/debug (ro) :
*
* Display debugging info (only if debugging is active at compilation time)
- Added the following new CPU Governors:
intellimm
bioshock
yankactive
- Updated to the very fresh (barely 24 hours old) Linux Base 3.4.104 !!
Change:
- The kernel is now patched to be used as a cd-rom/usb stick for flashing .iso images to your pc
(yep.. that's right)
All you need is this free app:
https://play.google.com/store/apps/details?id=com.softwarebakery.drivedroid&hl=en
and go here to read some of the magic
http://xdaforums.com/showthread.php?t=2196707