Changelog:
XX.02-beta10 27/06/2012
Kernel: Fix typo in ext4 driver that may have caused those slowdowns on wakeup and unlock
Kernel: touchscreen: Optionally flash LED buttons on touch, not in the tweaker app yet, if you need it *now*, echo/write time in ms into /sys/class/sec/sec_touchscreen/tsp_flash_timeout, e.g. for one second
echo 1000 > /sys/class/sec/sec_touchscreen/tsp_flash_timeout
Fileserver: On download instead of "download.php" correct filenames are saved
XX.02-beta9 25/06/2012
Kernel: Use old cpufreq module (pre beta2/beta5)
Kernel: Slide-to-Invert does not get confused by Pinch-to-Zoom
XX.02-beta8 24/06/2012
Kernel: Update to Linux 3.0.36
Kernel: Universal Slide-to-Invert option, toggle inverted screen colors by sliding from the very left to the very right of the screen using two fingers
Kernel: Revert 700mV option on for mali gfx unit
xxTweaker v0.3.9_rc2 22/06/2012
xxTweaker: Update v0.3.9_rc2
xxTweaker: xxTweaker: Make OTA system more efficient
xxTweaker: System: Significantly improve settings restore engine core speed (only one single I/O operation, use precompiled regex'es)
xxTweaker: System: Load CM/codeworkx' 20-step brightness settings and a few more when choosing the open source sensor HAL
XX.02-beta7 22/06/2012
Kernel: Wifi: Revert incompatible patches prior to N7000 update
Kernel: cpufreq: Set limit for frequency lock
Kernel: Even less noise in kernel log
Ramdisk: Tweaks: Make AFTR or LPA default cpuidle mode
xxTweaker v0.3.9_rc1 21/06/2012
xxTweaker: Update v0.3.9_rc1
xxTweaker: Include Spanish translations (D4rKn3sSyS)
xxTweaker: Print xxTweaker version in logcat
xxTweaker: More performance optimizations
xxTweaker: CPU: Configuration of new interactive governor options
xxTweaker: System: Restore CPU voltage settings correctly
xxTweaker: System: Restore BLN timout settings correctly
xxTweaker: System: Confirmation that fuel gauge has been reset
XX.02-beta6 21/06/2012
Kernel: Update Linux 3.0.35
Kernel: Update custom Linaro toolchain to linaroXX-4.7-2012.06
Kernel: Update wifi drivers from GNote N7000 Update 3
Kernel: Update mmc drivers from GNote N7000 Update 3, MMC_CAP_ERASED disabled
Kernel: Led buttons stay off if they are supposed to
Kernel: interactive governor: Add a time view concept, behaviour depends on load history
Kernel: Get rid of unnessecary noise in kernel log
Kernel: More upstream Patches
Ramdisk: Update recovery, douple-tap instead of single tap to select, confirmation dalvik cache wipe
xxTweaker v0.3.9_beta7 18/06/2012
xxTweaker: OTA updates should work in any ROM now
xxTweaker: Show progress bar on OTA update download, ask before rebooting and installation of updates
xxTweaker: Some performance optimizations
xxTweaker: CPU: Fix FC on restart when active governor is conservative
xxTweaker v0.3.9_beta6 15/06/2012
xxTweaker: Performance optimizations, use threads for demanding tasks
xxTweaker: BLN & LED: Fix notification duration loaded on restart
xxTweaker: System: Fix LCD-Density function
XX.02-beta5 15/06/2012
This should fix those "slow-downs" experienced by a few users.
XX.02-beta4 14/06/2012
This update is only needed for the new led backlight level (= "0") to avoid users reporting their bln was broken.
xxTweaker v0.3.9_beta5 14/06/2012
kernel: keyboard: cypress: Use standard voltage for constant/blinking bln, with very low voltages, the user might wonder why "bln does not work"
kernel: Upstream patches from CM9 repo and more smaller patches
ramdisk: Update CWM recovery, add "Power off" option in Advanced menu (user request)
xxTweaker: System: Rewrite LCD-Density part to catch unxpected user settings
xxTweaker: System: Reset fuel gauge option (user request)
xxTweaker: Display: Rewrite touch config logic
xxTweaker: BLN & LED: New "Level 0" for the LED button backlight, helps as workaround to keep LED buttons effectively off
xxTweaker: BLN & LED: New 1 minute timeout for notifications (user request)
xxTweaker: CPU: On governor change, reload saved user settings for the selected governor. So now it's possible to have individual settings for each governor - nice!
xxTweaker: CPU: Remove read only value sampling_rate_min from settings in ondemand and conservative
xxTweaker: CPU: Fix Bus Frequency up threshold value on reload after reboot
xxTweaker: CPU: Fix on changing governors, governor list reports the actually selected governor
xxTweaker: New settings administration. Save, restore, manage and reset your settings. As it is a new function that required much more than 1000 lines of code and a lot of detail work (and as a sidenote is the killer feature in ExTweaks Pro that costs you $$$), there may be small errors. If errors occure, please supply logs and report what exactly happened before failure.
XX.02-beta3 12/06/2012
Ramdisk: Hotfix /system mounts, an error in CM? Why different mounts mounts in lpm.rc and recovery.rc?
xxTweaker 0.3.9-beta4 11/06/2012
kernel: Update to Linux 3.0.34
kernel: mach-exynos: cpufreq: Align with Samsung i9300 Update 1
ramdisk: More CM9 changes (fix charging gfx)
xxTweaker: Change backup directory to {internal SD-Card}/xxTweaker, to make it accessible via MTP or mass storage
xxTweaker: Kernel compatibility check on startup, if not ask to download (i.e. after ROM update)
xxTweaker: Check for changed Exynos sensor HAL, if yes ask if user wants to switch back (i.e. after ROM update)
XX.02-beta2 11/06/2012
kernel: Update to Linux 3.0.34
kernel: mach-exynos: cpufreq: Align with Samsung i9300 Update 1
ramdisk: More CM9 changes (fix charging gfx)
xxTweaker: Change backup directory to {internal SD-Card}/xxTweaker, to make it accessible via MTP or mass storage
xxTweaker: Kernel compatibility check on startup, if not ask to download (i.e. after ROM update)
xxTweaker: Check for changed Exynos sensor HAL, if yes ask if user wants to switch back (i.e. after ROM update)
xxTweaker 0.3.9-beta3 08/06/2012
xxTweaker: Auto check for updates on startup
xxTweaker: Rude method to enforce boot settings really only once
xxTweaker: Fix null pointer error Screen Update Service in rare occasions
xxTweaker: Fix batch flash function error that made only the latest zip being flashed
xxTweaker 0.3.9-beta2 06/06/2012
Use different method to detect switched mountpoints (getprop), fixes FC in OTA and possibly other locations
Everybody else may test OTA now
XX.02-beta1 06/06/2012
kernel: Update to Linux 3.0.33
kernel: Decrease min voltage on BUCK3, allow 25mV steps
kernel: Lock frequency for secondary cpu, disabled by default, use with caution as you may effectively turn your device into single core
ramdisk: Don't auto-install xxTweaker, remove tweaker binary
ramdisk: More CM9 updates
xxTweaker: Update 0.3.9_beta2
xxTweaker: Split "General" into new "System" and "xxTweaker" sections
xxTweaker: OTA Updates, download dir is internal sd-card/download. Logic is a) check for kernel update, b) check if app update is required c), if not a) or b) check for app update. There will never be a guaranted backward compatibility. If something does not work, please don't just complain, do something productive instead; create logs and supply info about what exactly happened prior to failure.
xxTweaker: Print kernel- and ROM-version to logcat for debugging
xxTweaker: Add dmesg to debug archive
xxTweaker: CPU: Control lock frequency for secondary cpu
xxTweaker: GPU: Fix threshold settings
xxTweaker: ROM Manager: Replace spaces with underscores in backup names
xxTweaker: ROM Manager: Fix array out of bounds error causing an FC on some mount point configurations, will be optimized next
xxTweaker: Many smaller fixes
XX.01-Final 01/06/2012
Kernel: Cosmetic changes cypress module
Kernel: Fix: GPU voltage is now really from 700 mV
Kernel: j4fs as loadable kernel module
xxTweaker: Update to v0.3.7
xxTweaker: Fix nasty bug that enabled backlights when opening BLN & LED settings
xxTweaker: CPU: ondemand freq_for_responsiveness and interactive hispeed_freq will be loaded on reboot
xxTweaker: General: Option Fix Permissions
xxTweaker: General: Choice between open source und proprietary sensor HAL
xxTweaker: General: Save logcat, last_kmsg and config as tar.gz archive for debugging
xxTweaker: General: Value LCD Density is checked to avoid null pointer exceptions upon errorous user behaviour
xxTweaker: English translations (finally
)
xxTweaker: Clean su process
xxTweaker: Lots of small fixes
Ramdisk: Animated AOSP graphics while charging (CM9)
Ramdisk: Latest CM9 Updates
Ramdisk: Finer permissions for xxTweaker files and directories
Ramdisk: Open source und proprietary sensor HAL files
XX.01-RC5.2 27/05/2012
kernel: cpufreq: interactive: start/stop kinteractiveup with the governor (fixes reboot when charging while device is off)
ramdisk: Copy MFC firmware for ROMs that do not include the file (play video files even on badly cooked ROMs)
xxTweaker: Update to v0.3.6
xxTweaker: Allow +-1000 steps for Seekbars with a maximum value > 10000
xxTweaker: Clarify that BLN will be of course disabled if charger is unplugged
xxTweaker: Run Boot Completed Service only once (should fix toasts "xxTweaker has been granted Superuser permissions" in other applications)
Xx.01-RC5.1 23/05/2012
Kernel: Linux kernel updated 3.0.32
Kernel: BLN is activated automatically when connected to a charging cable
Kernel: Performance governor wakes up (wake fix freeze) at max policy
Ramdisk: Using the old liblights module (fixed permanently light buttons)
Ramdisk: Directory/Vendor with MFC firmware removed (now part of the ROM)
xxTweaker: Updated v0.3.5
xxTweaker: (TODO: represent different lighting modes) configuration of the automatic activation of BLN to connect a charging cable
xxTweaker: charge current up to 650 mA
xxTweaker: Fix: behavior ROM Manager at Switched mountpoints
xxTweaker: Fix: Typo CWMR touch
xxTweaker: Fix: MinMax sliders freq_responsiveness
xxTweaker: Fix: MinMax sliders sampling_down factor
xxTweaker: Fix: ignore_nice_load MinMax sliders and more
XX.01 RC5 21/05/2012
Kernel: BLN Breathing optimized and more beatiful
Kernel: BLN deactivated for low battery
Kernel: BLN notifications optionally do not restart the notification timeout
Kernel: BLN optional if charge the phone is permanently active
Kernel: No clicking noise when booting
Kernel: upstream patches: USB gadget audio support, Broadcom wireless drivers, sound, etc.
Kernel Update Linaro 4.7-2012.05 GCC toolchain
Ramdisk: liblight update module updates from CM9 repo
xxTweaker: BLN as a menu list
xxTweaker: BLN notification period
xxTweaker: BLN timeout notification added new notification not start
xxTweaker: BLN configuration during charging
xxTweaker: BLN configuration for low battery
xxTweaker: General: creating and saving reports Logcat in /data/.xxTweaker/logs/ (If you think you found an error generate a logcat and report (saved in /data/.xxTweaker).)
xxTweaker: General: auto-update option
xxTweaker: ROM Manager: Switched recognition mountpoints
xxTweaker: New boot routine for load safe Preferences to load automatically
xxTweaker: Language resources dynamic (for international translator)
xxTweaker: Fix: Preferences screen is now displayed correctly (no functional change)
xxTweaker: Fix: Individual touchscreen configuration is updated in the display menu (no functional change)
Xx.01 RC4 13/05/2012
Kernel: Linux 3.0.31
kernel: kernel function BLN Breathing /blinking effect and test mode
kernel: kernel Touchkey fadeout
effect: Touchkey brightness adjustable
kernel: fix FM radio, Si4709_driver kernel module is loaded
kernel: Additional adjustable parameters touchscreen kernel: touch screen parameters are automatically according to state (charging /discharging) enabled kernel: Numerous patches upstream
xxTweaker: Screen: Additional parameters and threshold noise filter movement
xxTweaker: Screen: Different settings of the new touchscreen parameters
xxTweaker: BLN and LED: control of the new kernel functions
XX.01-RC3 05/04/2012
Kernel: MFC firmware: compatible with existing and future CM9 nightlies from 5.4.2012
kernel: bus frequency: thresholds up /down adjustable kernel: bus frequency: adjustable voltage supply (undervolting)
kernel: Wireless: New Broadcom driver from Korean M250S Update5
kernel: upstream patches Low memory killer, wireless, interactive governor
Recovery: Existing File "/ data / .disable_touchselect" disables touch to Select
Tweaker CPU: bus frequency set thresholds and Vorsorgungsspannungen
Tweaker: General: Touch to select deactivated
Tweaker: General: CPUIdle aftr + LPA mode selectable
Tweaker: General: Tweaker settings can be saved (temporary solution)