Hi Guys.

I'll get the drivers compiled for ICS later on and see If I can get smoother solution for you folks to play with.

@jamespvz Is this the one you have http://3g-modem.wetpaint.com/page/Hu...%28Vodafone%29? can you confirm that this is the one made by Huawei and not ZTE?

TIP: The Huawei one has the code K3565-H

Thanks
Trev

yes is that pen

Hi all.

I'm following this thread too because I need a 3g adapter but I found that the archos one is 7Mbps, while I'd like to have a 14Mbps one. Trevd, I hope that you will find the solution for me and the other archos fans!

If you suggest me a good adapter, I'll buy it and then help you with tests.

Thanks.
Bye

Hello

this work with ICS 4?

Regards, Robert

file is corrupt archos-ics-gsm.zip 554 byte ... resend please

Originally Posted by h47e

file is corrupt archos-ics-gsm.zip 554 byte ... resend please

The file is not corrupt, i'ts correct 404 error html. But not zip, really.

# usb_modeswitch -s 6 -v 12d1 -p 1446 -V 12d1 -P 1436 -M 55534243123456780000000000000011062000000100000000 000000000000

Looking for target devices ...
No devices in target mode or class found
Looking for default devices ...
No devices in default mode found. Nothing to do. Bye.

# ls -la /dev/tty*
crw-rw-rw- 1 root root 5, 0 Apr 21 18:04 /dev/tty
crw------- 1 root root 249, 0 Apr 21 18:04 /dev/ttyGS0
crw------- 1 root root 249, 1 Apr 21 18:04 /dev/ttyGS1
crw------- 1 root root 249, 2 Apr 21 18:04 /dev/ttyGS2
crw------- 1 root root 249, 3 Apr 21 18:04 /dev/ttyGS3
crw------- 1 root root 252, 0 Apr 21 18:04 /dev/ttyO0
crw------- 1 root root 252, 1 Apr 21 18:04 /dev/ttyO1
crw------- 1 root root 252, 2 Apr 21 18:04 /dev/ttyO2

#dmesg
[ 2338.794708] hub 1-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?
[ 2338.795043] hub 1-0:1.0: unable to enumerate USB device on port 1

Bus 002 Device 013: ID 12d1:1446 Huawei Technologies Co., Ltd. E1552 (HSPA modem)
3g stick ON