[SOLVED] RamDump problems (partitions)

raqs · Aug 11, 2014

hi
i have problem and i can not find any solution :/
first problem occured when i tried install TWRP using application - it asked about partition and i confirmed that - it was bad idea.
Due to that i received in bootloader message: Activate cmdline overflow - and it was a bootloop.
I have tried different things, using fastboot and trying to install CWM or other versions of TWRP - no results
Then i used oem firmware - and it helped - line with Activate cmdline overflow - dissapeared.
I installed TWRP in version 2.7.0.4k and everything was fine - even instalation of ROM (MaximusHD 13) went fine.
But after instalation i am getting rumdump message and this problem i can not solve.
Message: Unknown: CPU0: 0x5B, CPU1: 0x5, CPU2: 0x5, CPU3: 0x5, IMEM: 0x776655AA PMIC: RESIN_N (0)

I have tried to install another ROM (InsertCoin) and the result is the same, ramdump message

It is strange, because after turning phone on, i can see splash screen from Insertcoint, so it boots, but when it is comming to start the system -> i see ramdump message.

Maybe after flashing with oryginal firmware i done sth wrong?

In general phone is HTC Butterfly S (901e):
*** UNLCOKED ***
DLXP_U PVT SHIP S-OFF RH
CID-11111111
HBOOT-1.54.0000 (this changed after flashing firmware, before i had 1.55)
RADIO-4A.19.3263.16
OpenDSP-v32.120.274.0909
OS-1.21.709.3
eMMC-boot 2048MB

is there any way to solve this?
Please help

raqs · Aug 11, 2014

anybody something? ive tried cwm and instalation od ofl maximushd version 11 but the problem is still :/
should i change hboot to 1.55 but how? cause i am runnig out of ideas :/

migascalp · Aug 11, 2014

raqs said:
anybody something? ive tried cwm and instalation od ofl maximushd version 11 but the problem is still :/
should i change hboot to 1.55 but how? cause i am runnig out of ideas :/

you can try to flash all firmwares chronologically. 1.23 then 2.21 ....finally 4.10

raqs · Aug 11, 2014

migascalp said:
you can try to flash all firmwares chronologically. 1.23 then 2.21 ....finally 4.10

i've tried stock rom 3.06 from thread http://xdaforums.com/showthread.php?t=2422783 using TWRP (2.7.0.4k)
but with no luck, still the same communicate ramdump :/
any other ideas? or should i still try 1.23, but where i can find that ROM?
maybe there is some problem with partitions? but i dont have proper knowledge about this :/

koniiiik · Aug 11, 2014

raqs said:
i've tried stock rom 3.06 from thread http://xdaforums.com/showthread.php?t=2422783 using TWRP (2.7.0.4k)
but with no luck, still the same communicate ramdump :/
any other ideas? or should i still try 1.23, but where i can find that ROM?
maybe there is some problem with partitions? but i dont have proper knowledge about this :/

@migascalp was talking about the firmware, not the ROM. Try downloading the firmware.zip packages from the post you linked to and installing those in order. And yes, this really does appear to be an issue with some of the system partitions. If the only problem is that some partition has wrong contents, you should be able to get the thing to work again this way. If, however, the partition layout got messed up, I have serious doubts.

And in the future, I'd advise to avoid using any apps that claim they can mess with your firmware partitions automatically.

raqs · Aug 11, 2014

koniiiik said:
@migascalp was talking about the firmware, not the ROM. Try downloading the firmware.zip packages from the post you linked to and installing those in order. And yes, this really does appear to be an issue with some of the system partitions. If the only problem is that some partition has wrong contents, you should be able to get the thing to work again this way. If, however, the partition layout got messed up, I have serious doubts.

And in the future, I'd advise to avoid using any apps that claim they can mess with your firmware partitions automatically.

Firmware 1.23.708.3 - results: message
KP: surfaceflinger PC: strlent 0xc/0x20 LR:strlcpy+0x18/0x50
I have received screen with RamDump Saving - and icon

Firmware 2.21.708.1
Hboot updated to 1.55 as i can see
and then i am getting message
Active cmdline overflow (1045 bytes)
so as i see moving back

Firmware 3.06.708.3
hboot updated to 1.57
same message: active cmdline overflow (1045 bytes)

Firmware 4.10.708.1
hboot 1.57 still
same communicate unfortunatelly
message: active cmdline overflow (1045 bytes)

i dont know it if is ok but when entering bootloader im getting sth like this
SD Checking ...
Loading...[PO68DIAG.zip]
No image!
Loading...[PO68DIAG.nbh]
No image or wrong image!
Loading...[PO68IMG.zip]
Loading...[PO68IMG.nbh]
No image or wrong image!

but then it dissapears and all is ok

seems tha tonly version 1.23 helps with message active cmdline overflow, it also gives hboot in version 1.54

any other ideas?
can somebody help me with those partitions? or i have already a brick and i have to say goodbay to phone? :/

harry655 · Aug 12, 2014

Hmmm, I just saw this after your pm @raqs and I'm not sure I Can help since you have the 901e model, I have the 901s. Maybe you can do what I suggested with those firmware files but in reverse. Can't hurt if ya phone's bricked already, can it

migascalp · Aug 12, 2014

after a little research
http://xdaforums.com/showthread.php?t=2739126t
On DLXP_UL misc=~~mmcblk0p24~~ mmcblk0p20

raqs · Aug 12, 2014

migascalp said:
after a little research
http://xdaforums.com/showthread.php?t=2739126t
On DLXP_UL misc=mmcblk0p24

so as i understand, if somebody will send be image of this partition and i will push it on phone, everything should be fine?

migascalp · Aug 12, 2014

start by making a backup of ~~mmcblk0p24~~ mmcblk0p20 and verified using a hex editor that matches the description.
see step 2 of the tutorial.

raqs · Aug 12, 2014

migascalp said:
start by making a backup of mmcblk0p24 and verified using a hex editor that matches the description.
see step 2 of the tutorial.

have You got butterfly s 901e? if yes, can You get image of this partition and send it to me? would be great

migascalp · Aug 12, 2014

Sorry 920s. Can you pm me a link for your backup of ~~mmcblk0p24~~ mmcblk0p20.
I compare that with mine.

Envoyé de mon HTC One_M8 en utilisant Tapatalk

migascalp · Aug 12, 2014

Return home and after verification, I have made a small mistake.
The block matching misc is mmcblk0p20
Sorry

For the 920s:

Code:

cat /proc/emmc
dev:        size     erasesize name
mmcblk0p20: 000ffa00 00000200 "misc"
mmcblk0p37: 00fffe00 00000200 "recovery"
mmcblk0p36: 01000000 00000200 "boot"
mmcblk0p38: 8bfffc00 00000200 "system"
mmcblk0p27: 00140200 00000200 "local"
mmcblk0p39: 17fffe00 00000200 "cache"
mmcblk0p40: 2d0000000 00000200 "userdata"
mmcblk0p23: 01400000 00000200 "devlog"
mmcblk0p25: 00040000 00000200 "pdata"
mmcblk0p28: 00010000 00000200 "extra"
mmcblk0p34: 04b00200 00000200 "radio"
mmcblk0p16: 03c00400 00000200 "adsp"
mmcblk0p15: 00100000 00000200 "dsps"
mmcblk0p17: 007ffa00 00000200 "radio_config"
mmcblk0p21: 00400000 00000200 "modem_st1"
mmcblk0p22: 00400000 00000200 "modem_st2"
mmcblk0p30: 00040000 00000200 "skylink"
mmcblk0p31: 01900000 00000200 "carrier"
mmcblk0p29: 00100000 00000200 "cdma_record"
mmcblk0p19: 01bffe00 00000200 "reserve_1"
mmcblk0p33: 034ffa00 00000200 "reserve_2"
mmcblk0p35: 05fffc00 00000200 "reserve_3"
mmcblk0p32: 04729a00 00000200 "reserve"

nkk71 · Aug 12, 2014

@migascalp does the misc partition on your Butterfly seem similar to what was described in my post?

@raqs just got off work, any progress? first go back to a custom recovery (downgrade firmware if needed), and make sure you find the correct partition:

Code:

adb shell cat /proc/emmc

then pull it as mentioned in step 2 of my guide (substituting "/dev/block/mmcblk0p19" with whatever block your misc partition is in), and send it to migascalp and/or me to take a look at it.

migascalp · Aug 12, 2014

more or less ...

First octets:

Code:

Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 30 31 32 33 34 35

00000000  48 54 43 5F 5F 36 32 32 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  HTC__622..............................................
00000036  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ......................................................
0000006C  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 34 2E  ....................................................4.
000000A2  31 30 2E 37 30 38 2E 31 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  10.708.1..............................................
000000D8  00 00 00 00 00 00 00 00 45 42 52 5F 55 70 64 61 74 65 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ........EBR_Update....................................
0000010E  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ......................................................
00000144  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ......................................................
0000017A  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ......................................................
000001B0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ......................................................
000001E6  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ......................................................
0000021C  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ......................................................
00000252  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30 58 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46  ..................................0XFFFFFFFFFFFFFFFFFF
00000288  46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 00 00 00 00 00 00  FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF......
000002BE  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ......................................................
000002F4  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 52 49 4E 46 4F 31 31 30 52 49 4E 46 4F 31  ........................................RINFO110RINFO1
0000032A  31 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  10....................................................
00000360  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ......................................................
00000396  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ......................................................
000003CC  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ......................................................
00000402  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ......................................................
00000438  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ......................................................
0000046E  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ......................................................
000004A4  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ......................................................

raqs · Aug 12, 2014

@nkk71: no progress unfortunatelly

for now on i am using firmware 1.23.708.3 cause it is only working with custom recovery
Custom Recovery is TWRP in version 2.7.0.4k

adb devices says:

Code:

List of devices attached
FA36RPN03066    recovery

dont know if it is ok, while it starts with FA* :/

adb shell cat /proc/emmc says:

Code:

mmcblk0p20: 000ffa00 00000200 "misc"
mmcblk0p37: 00fffe00 00000200 "recovery"
mmcblk0p36: 01000000 00000200 "boot"
mmcblk0p38: 8bfffc00 00000200 "system"
mmcblk0p27: 00140200 00000200 "local"
mmcblk0p39: 17fffe00 00000200 "cache"
mmcblk0p40: 2d0000000 00000200 "userdata"
mmcblk0p23: 01400000 00000200 "devlog"
mmcblk0p25: 00040000 00000200 "pdata"
mmcblk0p28: 00010000 00000200 "extra"
mmcblk0p34: 04b00200 00000200 "radio"
mmcblk0p16: 03c00400 00000200 "adsp"
mmcblk0p15: 00100000 00000200 "dsps"
mmcblk0p17: 007ffa00 00000200 "radio_config"
mmcblk0p21: 00400000 00000200 "modem_st1"
mmcblk0p22: 00400000 00000200 "modem_st2"
mmcblk0p30: 00040000 00000200 "skylink"
mmcblk0p31: 01900000 00000200 "carrier"
mmcblk0p29: 00100000 00000200 "cdma_record"
mmcblk0p19: 01bffe00 00000200 "reserve_1"
mmcblk0p33: 034ffa00 00000200 "reserve_2"
mmcblk0p35: 05fffc00 00000200 "reserve_3"
mmcblk0p32: 04729a00 00000200 "reserve"

file in attachement
i hope that somebody will find solution

nkk71 · Aug 12, 2014

raqs said:

@nkk71: no progress unfortunatelly

for now on i am using firmware 1.23.708.3 cause it is only working with custom recovery
Custom Recovery is TWRP in version 2.7.0.4k

adb devices says:

Code:

List of devices attached
FA36RPN03066    recovery

dont know if it is ok, while it starts with FA* :/

adb shell cat /proc/emmc says:

Code:

mmcblk0p20: 000ffa00 00000200 "misc"
mmcblk0p37: 00fffe00 00000200 "recovery"
mmcblk0p36: 01000000 00000200 "boot"
mmcblk0p38: 8bfffc00 00000200 "system"
mmcblk0p27: 00140200 00000200 "local"
mmcblk0p39: 17fffe00 00000200 "cache"
mmcblk0p40: 2d0000000 00000200 "userdata"
mmcblk0p23: 01400000 00000200 "devlog"
mmcblk0p25: 00040000 00000200 "pdata"
mmcblk0p28: 00010000 00000200 "extra"
mmcblk0p34: 04b00200 00000200 "radio"
mmcblk0p16: 03c00400 00000200 "adsp"
mmcblk0p15: 00100000 00000200 "dsps"
mmcblk0p17: 007ffa00 00000200 "radio_config"
mmcblk0p21: 00400000 00000200 "modem_st1"
mmcblk0p22: 00400000 00000200 "modem_st2"
mmcblk0p30: 00040000 00000200 "skylink"
mmcblk0p31: 01900000 00000200 "carrier"
mmcblk0p29: 00100000 00000200 "cdma_record"
mmcblk0p19: 01bffe00 00000200 "reserve_1"
mmcblk0p33: 034ffa00 00000200 "reserve_2"
mmcblk0p35: 05fffc00 00000200 "reserve_3"
mmcblk0p32: 04729a00 00000200 "reserve"

file in attachement
i hope that somebody will find solution

yep, that partition is messed up, i have to go for tonight sorry, but think @migascalp can fix it for you
g'luck, cya tomorrow with a hopefully smiley face

raqs · Aug 13, 2014

nkk71 said:
yep, that partition is messed up, i have to go for tonight sorry, but think @migascalp can fix it for you
g'luck, cya tomorrow with a hopefully smiley face

i hope it too

migascalp · Aug 13, 2014

I take care of it after work

Envoyé de mon HTC One_M8 en utilisant Tapatalk

nkk71 · Aug 13, 2014

raqs said:
i hope it too

here you go, i've nulled out pretty much most of the partition.

extract the attached file (using WinRAR), put it in your adb/fastboot folder and flash it, while booted in custom recovery:

Code:

adb push mmcblk0p20_fixed.img /tmp/

adb shell dd if=/tmp/mmcblk0p20_fixed.img of=/dev/block/mmcblk0p20

after that you should no longer receive the "active cmdline overflow" when you update firmware.

good luck

[SOLVED] RamDump problems (partitions)

Member

Member

Senior Member

Member

Senior Member

Member

Senior Member

Senior Member

Member

Senior Member

Member

Senior Member

Senior Member

Inactive Recognized Developer / Contributor

Senior Member

Member

Attachments

Inactive Recognized Developer / Contributor

Member

Senior Member

Inactive Recognized Developer / Contributor

Attachments

Similar threads

Top Liked Posts