Updated!!!!
Sent from my SGH-T889 using xda app-developers app
Sent from my SGH-T889 using xda app-developers app
Sorry if this is a stupid question, but is the UC version underclocked out of the box or do you just mean it allows for underclocking where the other doesn't?
What are you all using to under/overclock? Trickster?
UC version has the 120mhz. It allows for that frequency. For me i used the UC version and undervolt it even more. Loving my note. It can handle it. No SOD so far. Make sure you stay with pegasusq gov... i think people are getting sod using other govs.
Trickster
UC version has the 120mhz. It allows for that frequency. For me i used the UC version and undervolt it even more. Loving my note. It can handle it. No SOD so far. Make sure you stay with pegasusq gov... i think people are getting sod using other govs.
Trickster
UC version has the 120mhz. It allows for that frequency. For me i used the UC version and undervolt it even more. Loving my note. It can handle it. No SOD so far. Make sure you stay with pegasusq gov... i think people are getting sod using other govs.
Trickster
I am sorry, where did you change the governer? I think I need to install something but what is it? Thank you!
I was getting the BSOD with Beans 18 rom on 29.2 running 200-1920mhz on pegasus, I brought it back up to 800-1920 and still SOD. I will be testing out 30 to see if it plays nice with Beans. What rom are you on?
So then does the NO UC version not allow underclocking at all or just not as low as 120? Again, sorry for the noob question, I'm just trying to figure out the multiple versions choice if neither of them are underclocked right on install.
Why would someone choose the NO UC version?
I really hope this is just poor humor and not a serious question
Sent from my SCH-I605 using xda app-developers app
What's funny about it?? I know he has a aosp version I just don't see it anymore so I was wandering if he just combined it to work with both tw an aosp that's all...I like his kernel I've just been using aosp an I would like to use his kernel that's all so if it is then it is an if not well I'm sry for asking.
The very first line of the op says it's for tw only and not for aosp
Sent from my SCH-I605 using xda app-developers app
I leave everything default, will I get any benefit from installing Trickster? Thanks!
The only thing I change in trickster mod is turn touch wake on and set it to 0...
10|03
Upgrade to Linux 3.0.97
Revert of GPU edits to fix glitches in Graphics/reboots
Raise Voltages on 1960 for stability
Update zram_drv.c … thanks to insanemal +
9|26
Raised Max Clock Speed --1960
Edits to GPU Clocks and scaling for Max performance (while preserving battery at stock values)
New compression
ADB Remount Enabled
9|18
Complete Rebuild from Updated Source
Zen default sched
Upgraded to 3.0.96
Fixed GPU freq scaling
More voodoo code removal
9|11
Upgrade to Linux Version 3.0.95
Edits to GPU Voltage Allocation
Boeffla Sound Replaces Voodoo (by request)
Boeffla and Trickster apps now added with flash
Clean Up of Version
Remove Dirty in Version Description
USB Charging Rate Increased to match A/C rate
ZZmoove Updated to 7d
Fixed Memory/cache leak that was causing instability and poor battery
8|28
I have been slacking on releasing kernels outside of my ROMs so this changelog is kind of a mess.
If you cannot follow the log please see my git for itemized changes
--Upraded to Linux 3.0.93
-- Added in exfat module source thanks to Faux123 and SORC
-- ZZMOOVE updated to v0.7 (ZaneZam/Yank)
-- LulzactiveQ added in (Gohkanmoral)
-- Upgraded to Linux 3.0.91
-- Wifi driver edit for reduce wakelock
-- All sources Merged!!
-- Upgraded to Linux 3.0.87
-- Added ZZMOOVE
---- zzmoove edited to support more frequencies
-- Edits to WIFI handling for less wakelock issues/performance
-- Some Peg gov Edits
-- Edit to I/O que
-- Edits to kernel/module.c in hopes of further work on exfat later on
7|2 --
Upgraded to Linux Version 3.0.84
New Under Clock Frequency --STABALIZED
- 100 mhz UC all set
Triangle away support
---All testers have reported back as things being stable and most
have run it through intensive and reg use and no SOD at 100mhz low.
I believe the times of certain devices not liking the low step is over. Have Fun
6|24 --
Upgraded to Linux Version 3.0.83
2 Versions
--- One with UC for those who's chips dont mind
---One Stock Low end
New Under Clock Frequencies
- 120 mhz UC VERSION ONLY
Edits to Peg GOV in Both Versions
6|19 --
Upgraded to Linux Version 3.0.82
New Under Clock Frequencies
- 160 mhz
- 140 mhz
6|13 --
Complete Clean Rebuild from updated sources
Linux 3.0.81
ZRAM
Freq Voltage Edits
Compression Edits
Freq "Bleeding" fixed
Intelliplug/Ecomode
More Mali Edits
Dynamic Filesync
5|05 --
Upgraded to Linux Version 3.0.76
GPU Handling is Back And Fixed
Touchscreeen Mods
TouchBoost Control Added
SetLocalversion Modification ( Just Shows differently in about)
More...
4|26 --
Upgraded to Linux Version 3.0.75
TouchWake Added (Control With TricksterMod)
Voltages/Voltage interface Fixed for Undervolting Compatibility
FlexRate Edits
Fsync Edits
IntelliPlug
4|18 --
Upgraded to Linux Version 3.0.74
Edits to Freq/Voltage Handling
4|11 --
Upgraded to Linux Version 3.0.72
sysfys-helpers edit
double flexrate
Voltage control/UV voltage edits
Freq Edits
3|20 --
Upgraded to Linux Version 3.0.69
Etc
3|11 --
Voodo Sound Enabled
Upgraded to Linux Version 3.0.68
2|22 --
MHL Tv Out Audio Officially Fixed Damnit lol
Updated to Linux 3.0.64
2|15 --
Edit Frequencies
-OC to 1920
-Fix for CPU sticking Etc
-Removed GPU Edits From Last Version For Now
2|6 --
Mali Rework
GPU Can Now Be Adjusted By 3rd Party App
Ramdisk Modifications
- Fixed Memory Swap
- Probable MHL Audio Fix
Edit to Module.c
Added Lazy Governor
Added BFQv5 Sched
Added V(R) Sched
Set ReadAhead to 1024
Fixed Wonky Frequencies: No Issues With 3rd Party Apps Holding Freq
2|4 --
3.0.59 Revised
3.0.60
3.0.61
1900mhz OC!
Voltage Optimization
Edits to mali/gpu
Increased Charging Rate
2|1 --
Linux 3.0.59
Deadline Edit
Edits to sched.c
Multiple Updates from Samsung OSRC
1|28 --
Updated 27 Kernel Versions to Linux Kernel Version 3.0.58
-(ALOOOTTT of code updates)
Update to device sensors
1|21-- Initial Public Release
Man thank you for this can't have enough development for our phone!
Sent from my SCH-I605 using xda premium