Hellraise GT-I9100 Jellybean for SGH-I777

Search This thread

mattern1974

Senior Member
Jan 27, 2010
691
260
Tremont, Pennsylvania
This thread is to help people hellraise a GT-I9100 Jellybean 4.1 rom for use on our AT&T Galaxy S2 SGH-I777.

Get what you need as of August 1, 2012:

1.) Download a Jellybean 4.1 or 4.1.1 rom from the GT-I9100 forums. (NOTE: do not use from the I9100G, the hardware is different)
http://xdaforums.com/forumdisplay.php?f=1055

2.) Download a JB compatible SGH-I777 kernel. The following have compatible versions:
- Dream Kernel ( http://xdaforums.com/showthread.php?t=1788148 )
- Siyah Kernel ( http://xdaforums.com/showthread.php?t=1592228 )

3.) Download a CM9 SGH-I777 modem (this is AOSP based and needs a CM modem)
http://xdaforums.com/showthread.php?t=1336958&highlight=cm7+modem

4.) Download the Hellraiser zip I have attached to this post. This adds the needed keylayout and lib files for the SGH-I777.

Move the files to your internal SD card on your phone.

INSTALL ORDER:

1.) Boot into CWM recovery and do a Wipe/Factory Reset, Wipe Cache, Wipe Dalvik Cache, Format System.

2.) Install the Jelllybean GT-I9100 rom zip (Note: if the rom uses AROMA installer, do not reboot after install)

3.) Install the SGH-I777 Jellybean compatible kernel.

4.) Install the Hellraiser zip from this post to get the correct keylout for you SGH-I777.

5.) Install the SGH-I777 CM modem. (all JB roms at this date are CM10 based)

6.) REBOOT and get you some Jellybeans!

Credits go to Team Skyfire for the Dream Kernel, Ktoonsez and Gokhanmoral for the Siyah Kernel, RockRatt for the modems, and drakester09 for the keylayout and lib files in the Hellraiser zip attached. Thank these awesome devs every chance you can get!!
 

Attachments

  • JB-i9100-i777-hellraise-key-lib.zip
    5.2 MB · Views: 1,445
Last edited:

gr8hairy1

Senior Member
Nov 8, 2010
928
167
Michigan - Thumb
Thanks for putting together these directions.

Does this hellraiser package also change the build id back to i777 or will it still be i9100?
 

bb_hershey

Senior Member
Jun 4, 2009
241
15
Kuala Lumpur
Hey ts, thanks for the great tutorial. Just a question, has anyone successfully ported a JB rom with this tool?

Sent from SGS2 i777.. be prepared for typo.
 

loughary

Senior Member
Nov 29, 2011
205
79
Saint Louis
Hey ts, thanks for the great tutorial. Just a question, has anyone successfully ported a JB rom with this tool?

Sent from SGS2 i777.. be prepared for typo.


Yes, I'm currently using the 20120801 release from GT-I9100 CM10 thread from below. I did have to change the build.prop before it would flash via CWM. The easiest way I found to do that was to run it through Flash-aholicsTool and just check mark strip out device specific script calls and change device name to I777. (I did not check Hellraise option) Then follow the directions in the OP.


http://xdaforums.com/showthread.php?t=1794758
 

mattern1974

Senior Member
Jan 27, 2010
691
260
Tremont, Pennsylvania
I am on my 3rd GT-I9000 JB ROM and I use this method. It is not a tool just an easy way to add the proper key layout and libs for SGH-I777.

I manually select the build.prop with Root Explorer to edit in text editor.

Sent from my smooth as butter SGH-I777.
 

loughary

Senior Member
Nov 29, 2011
205
79
Saint Louis
Just wanting to verify if I'm using a GT-I9000 JB ROM that is hellraised would I use a kernel WITH mic swap or WITHOUT?

I'm assuming that it would be WITH mic swap.

Thanks.
 

mattern1974

Senior Member
Jan 27, 2010
691
260
Tremont, Pennsylvania
Just wanting to verify if I'm using a GT-I9000 JB ROM that is hellraised would I use a kernel WITH mic swap or WITHOUT?

I'm assuming that it would be WITH mic swap.

Thanks.

With mic swap is for AOSP based like CM10 or for a GT-I9100 ROM.

Without mic swap is only for AT&T leaks/ROMs like LE5 or LD3.

Sent from my smooth as butter SGH-I777.
 
Last edited:

binhoscc

Member
Aug 2, 2012
22
0
Instalation aborted!

Hello my friends, i followed all the tutorial, but when i will install the Jelllybean GT-I9100 rom zip i get this erro message:

Error in /sdcard/cm-10-20120801-EXPERIMENTAL-i9100-CODEWORKX.zip
(Status 7)
Instalation aborted.

My galaxy S2 is the i777 from AT&T and i think i did all the tutorial right!
What do you think is going on?
Thank you!
 

rk249

Senior Member
Jun 24, 2012
351
108
Hello my friends, i followed all the tutorial, but when i will install the Jelllybean GT-I9100 rom zip i get this erro message:

Error in /sdcard/cm-10-20120801-EXPERIMENTAL-i9100-CODEWORKX.zip
(Status 7)
Instalation aborted.

My galaxy S2 is the i777 from AT&T and i think i did all the tutorial right!
What do you think is going on?
Thank you!
You need to go into your build.prop and chage GT-I9100 to SGH-I777 & I9100 to I777. Or extract the build.prop from the cm10 zip and replace the one in your phone with it.
 

mattern1974

Senior Member
Jan 27, 2010
691
260
Tremont, Pennsylvania
Using Entropys ICS Hellraiser, I packed it with The Dream JB Kernel and a new modem. So all you have to do is flash this after you flash a i9100 ROM and it does everything for you :) http://db.tt/dEfrVjGB

This solution will work and is essentially the same as what I described in the OP.

My method is just a bit longer with the exception of choice in the future of newer kernels and modems that may be created.

As for the status 7 error...you need to unzip the JB ROM you have chosen and edit out any device scripts in the install that check for a GT-I9100 OR you need to edit your current ROM's build.prop to show GT-I9100 instead of SGH-I777 BEFORE you reboot into recovery to flash the JB ROM.

Some ROMs have a device script that verifies you are flashing to the "proper" device.

Sent from my smooth as butter SGH-I777.
 

fakhri

Senior Member
Aug 16, 2007
180
46
I tried to flash RR_Jelly_Bean_V3.0.1_Aroma with instraction first post but all time it hanging on RR bootanimation. I tried defoult, light version , same problem.
Before flashing wiped all and format system.
After flashing tried wipe cashe and dalvic cashe, same. :confused:
 
Last edited:

mattern1974

Senior Member
Jan 27, 2010
691
260
Tremont, Pennsylvania
Kernel is Siyah 3.5.1, as mentioned in first post.

Did you get the Siyah CM10 Test Kernel or the normal ICS 3.5.1 version? I would bet the 3.5.1 ICS version. My apologies...I should have been more specific.

As far as I can tell, the Siyah kernel generated by Ktoonsez for the SGH-I777, has separate ICS and JB versions. The GT-I9100 Siyah kernel is version 3.5.2 and seems to be for BOTH ICS and JB roms but that is only for that phone.

At this time, Ktoonsez' Siyah has mic swap and no mic swap versions for ICS 3.5.1 but the CM10 test kernel seems to be without mic swap, which would cause your call audio to be low since the top mic is being used instead of the bottom mic. Without mic swap is only for AT&T leaked roms (and we all know AT&T won't be releasing JB to us anytime soon). Please go thank or donate to Ktoonsez anyway because you know he will be on top of this in the future. http://xdaforums.com/showthread.php?t=1592228

I would highly recommend the Dream kernel WITH mic swap. This should fix your problem. Don't forget to Thank or Donate to Team Skyfire if you use their kernel. http://xdaforums.com/showthread.php?t=1788148

I am using the 2.6.9 version of the Dream kernel (with mic swap) with great results. For some reason, which is explained in their thread, 2.6.9 is actually newer than their 3.2.9 version. Something to do with the TWRP recovery for one and not the other.

Please let us all know your results using the proper kernel.
 
Last edited:
  • Like
Reactions: mi9xer and fakhri

fakhri

Senior Member
Aug 16, 2007
180
46
Thank You very match. I flashed Dream kernel and it works fine.
Thanks for your grate jobs.
 

dev997

Senior Member
Jan 27, 2011
322
75
Irvine
Hailraising i9100 SuperNexus rom

Hi,

Can someone please help me hailraising the Supernexus rom released yesterday in i9100.
link : http://xdaforums.com/showthread.php?t=1810042

I tried to hailraise it using the scripe you provided. When I tried to install it failed with bunch of build.prop mismatch and status 7 error. So as suggested earlier, I extracted its build.prop and edited it to match our device, but still it fails with same error. My proficieny in this area ends here and don't know what else to do here !!

I'm really interested in this build, as this is the only rom thats not based on cm10 exp build , but its made from the aosp source code directly and thus I hope it solves my media scanner issue and I could have a jb rom to work with.

Thanks !!!
 

Top Liked Posts

  • There are no posts matching your filters.
  • 22
    This thread is to help people hellraise a GT-I9100 Jellybean 4.1 rom for use on our AT&T Galaxy S2 SGH-I777.

    Get what you need as of August 1, 2012:

    1.) Download a Jellybean 4.1 or 4.1.1 rom from the GT-I9100 forums. (NOTE: do not use from the I9100G, the hardware is different)
    http://xdaforums.com/forumdisplay.php?f=1055

    2.) Download a JB compatible SGH-I777 kernel. The following have compatible versions:
    - Dream Kernel ( http://xdaforums.com/showthread.php?t=1788148 )
    - Siyah Kernel ( http://xdaforums.com/showthread.php?t=1592228 )

    3.) Download a CM9 SGH-I777 modem (this is AOSP based and needs a CM modem)
    http://xdaforums.com/showthread.php?t=1336958&highlight=cm7+modem

    4.) Download the Hellraiser zip I have attached to this post. This adds the needed keylayout and lib files for the SGH-I777.

    Move the files to your internal SD card on your phone.

    INSTALL ORDER:

    1.) Boot into CWM recovery and do a Wipe/Factory Reset, Wipe Cache, Wipe Dalvik Cache, Format System.

    2.) Install the Jelllybean GT-I9100 rom zip (Note: if the rom uses AROMA installer, do not reboot after install)

    3.) Install the SGH-I777 Jellybean compatible kernel.

    4.) Install the Hellraiser zip from this post to get the correct keylout for you SGH-I777.

    5.) Install the SGH-I777 CM modem. (all JB roms at this date are CM10 based)

    6.) REBOOT and get you some Jellybeans!

    Credits go to Team Skyfire for the Dream Kernel, Ktoonsez and Gokhanmoral for the Siyah Kernel, RockRatt for the modems, and drakester09 for the keylayout and lib files in the Hellraiser zip attached. Thank these awesome devs every chance you can get!!
    3
    Or he could've just googled i777 status 7 error.

    Sent from my SGH-I777 using Tapatalk 2

    Yes, you are right...but it never hurts to help someone along.

    Sent from my smooth as butter SGH-I777.
    3
    You can't get the hellraiser files to work because the kernel with the leak does NOT have CWM recovery.

    Kernel sources for this leak have not been released by Samsung so a proper kernel including CWM cannot be compiled.

    I'm absolutely dying to try the leak but experience tells me to hold off until an I777 kernel is produced for JB Samsung.

    My advice is to back off and wait for someone experienced to either make an I777 kernel with CWM injected or a proper I777 kernel compiled from source. Otherwise you will have multiple issues with the leak.

    Sent from my smooth as butter SGH-I777.
    2
    Because the original ROM creator may have tweaks in the build.prop I figured it best to leave the device I'd alone.

    You can manually change the build.prop to show SGH-I777 if you need it.

    Sent from my smooth as butter SGH-I777.
    2
    Kernel is Siyah 3.5.1, as mentioned in first post.

    Did you get the Siyah CM10 Test Kernel or the normal ICS 3.5.1 version? I would bet the 3.5.1 ICS version. My apologies...I should have been more specific.

    As far as I can tell, the Siyah kernel generated by Ktoonsez for the SGH-I777, has separate ICS and JB versions. The GT-I9100 Siyah kernel is version 3.5.2 and seems to be for BOTH ICS and JB roms but that is only for that phone.

    At this time, Ktoonsez' Siyah has mic swap and no mic swap versions for ICS 3.5.1 but the CM10 test kernel seems to be without mic swap, which would cause your call audio to be low since the top mic is being used instead of the bottom mic. Without mic swap is only for AT&T leaked roms (and we all know AT&T won't be releasing JB to us anytime soon). Please go thank or donate to Ktoonsez anyway because you know he will be on top of this in the future. http://xdaforums.com/showthread.php?t=1592228

    I would highly recommend the Dream kernel WITH mic swap. This should fix your problem. Don't forget to Thank or Donate to Team Skyfire if you use their kernel. http://xdaforums.com/showthread.php?t=1788148

    I am using the 2.6.9 version of the Dream kernel (with mic swap) with great results. For some reason, which is explained in their thread, 2.6.9 is actually newer than their 3.2.9 version. Something to do with the TWRP recovery for one and not the other.

    Please let us all know your results using the proper kernel.